Baldwin Reserve 4045 3" Wall B...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$29.00
$17.15
Baldwin Reserve 4045 3" Wall Bumper

Baldwin Reserve 4045 3" Wall Bumper

(No reviews yet) Write a Review

Model: 4045402
From the Reserve Series Collection
Selected Finish is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$29.00
$17.15
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Baldwin Reserve 4045 3" Wall Bumper

KEY FEATURES

  • 3” Projection, 1.1875” Diameter
  • The Wall Door Bumper is extended by design to protect doors and walls from damage.
  • Resilient rubber guard is replaceable - Complete mounting hardware included.
  • Baldwin Hardware has a rich tradition of high-quality, master craftsmanship, solid brass products. A difference you can both feel and see.

FEATURES

  • FEATURES: .Solid forged brass construction for maximum strength and durability. Stem of bumper has hexagon section to facilitate fastening without damaging finish. Resilient rubber guard is replaceable.
  • PACKED: Individually poly-bagged with appropriate fasteners (1 per poly bag).
  • FASTENERS: Supplied with wood screw thread.
  • FEDERAL SPECIFICATION EQUIVALENTS: Government Type: 1322 BHMA DESIGNATION: L02031

RESOURCES & DOWNLOADS

Manufacturer Resources

Product Specs

Product Group:
Door Trim and Accessories
Subcategory:
Door Stops, Holders, Silencers & Bumpers
Product Subgroup:
Door Stops, Holders, Silencers & Bumpers
Product Type:
Floor Door Stops
Commercial/Residential:
Residential
Collection:
Reserve Series
Product Model:
4045
Product Projection:
3"
Product Category:
Door Trim and Accessories
Department:
Door Hardware

Baldwin 4045402 – Frequently Asked Questions

1) Will the Baldwin Reserve 4045 bumper hold the door far enough off the wall to clear a lever handle?
The 4045 wall bumper projects 3 inches off the wall, which is what the extended stem is for: keeping the door face, and anything mounted on it, from contacting the wall. Whether that clears your lever depends on how far your trim sticks out past the door face plus the thickness of any baseboard the bumper mounts over. Measure the lever projection from the door face; if it exceeds 3 inches, this bumper won't stop the lever before the wall does.
2) Is the Baldwin 4045 a wall-mounted or a floor-mounted door stop?
It mounts to the wall. The 4045 is a base-mounted wall bumper with a 3 inch projection and a 1.1875 inch diameter rubber head, so it is fastened into the wall (typically through the baseboard) and the door swings into it. If your opening needs the stop coming up off the floor instead, a cast floor stop like the Trimco 1200/1201 in 3 inch or the lower-profile Trimco 1214 at 1.75 inch is the right shape for that.
3) What fasteners come with the Baldwin Reserve 4045 wall bumper, and will they work on a stud or on drywall?
Each 4045 ships individually poly-bagged with its fasteners, supplied with a wood screw thread. That means it is meant to land in solid backing: a stud, blocking, or a wood baseboard with framing behind it. Fastening into hollow drywall with a wood screw won't hold a door being pushed open, so if there's no stud where the door strikes, plan on adding a wall anchor or blocking. The stem has a hexagon section so you can put a wrench on it and tighten without marring the finish.
4) Is the Baldwin Reserve 4045 bumper rated for commercial traffic or is it a residential part?
Baldwin lists the Reserve 4045 as a residential product. It is solid forged brass and it carries the federal Government Type 1322 and BHMA designation L02031 for this stop type, but it is catalogued for residential duty, not high-cycle commercial openings. For a corridor, a school, or a multi-family common area getting constant use, an extra heavy duty stop such as the Trimco 1209 series is the type built for that traffic.
5) Will a wall bumper like the Baldwin 4045 work if my door swings against a wall that isn't square behind it?
A wall bumper only works when there's solid wall directly behind the point the door reaches, at the right height, within the 3 inch projection. If the door swings into an open corner, past the end of the wall, into a closet return, or onto a wall too far away, it will never make contact and you need a stop that comes up off the floor instead. Trimco's 1200/1201 cast floor stop is the 3 inch version of that, and the 1211 universal door stop is the option when the mounting situation isn't standard.
6) What is the difference between the Baldwin Reserve 4045 wall bumper and the Trimco 1200/1201 cast floor stop?
They stop the door at different points in the swing and mount to different surfaces. The Baldwin Reserve 4045 is a wall bumper with a 3 inch projection and a 1.1875 inch diameter, fastened to the wall so the door face lands against a replaceable rubber guard. The Trimco 1200/1201 is a cast floor stop in a 3 inch size, anchored to the floor so the door bottom rail catches it. Choose the 4045 where the wall behind the door takes the impact and you do not want a fixture in the walking path; choose a floor stop where the door swings into open wall you cannot drill, or where the door has a wide stile that would miss a bumper at bumper height.
7) I need a door stop that also holds the door open. Is the Baldwin 4045 the right part?
No. The Baldwin Reserve 4045 is a bumper only. It has a 3 inch projection and a resilient rubber guard that stops the door and protects the wall, with no catch or lever to retain the door in the open position. For an opening that has to stay open on demand, the Trimco 1209 series covers extra heavy duty stops and holders, so the hold-open function is part of that series rather than something added to a bumper. Specify the holder where a corridor, loading door, or ADA egress route needs the leaf parked open; specify the 4045 where the only job is arresting the swing.
8) The 3 inch projection is too long for my opening. What is a shorter alternative?
Projection is set by the gap between the door face and the wall or floor surface behind it, and the Baldwin Reserve 4045 is built at a 3 inch projection to reach across a wide standoff, such as a door that swings past a baseboard or a chair rail. Where the door lands much closer to its stopping surface, the Trimco 1214 is a floor stop in a 1.75 inch size. Measure from the stopping surface to the door face at the point of contact before you commit either way; a bumper longer than the gap holds the door short of its full swing, and one shorter than the gap lets the door hit the wall.
9) Can I replace the rubber tip on a Baldwin 4045 bumper instead of buying a whole new stop?
The resilient rubber guard on the 4045 is replaceable. When the tip flattens, tears, or leaves marks on the door, you swap the rubber and keep the forged brass body and its finish in place. For a property manager running the same bumper across a building, that means the maintenance item is the rubber head, not the stop.
10) What finishes does the Baldwin Reserve 4045 wall bumper come in, and can I match it to the rest of my Baldwin trim?
Fourteen finishes: 003 Polished Brass PVD, 031 Non-Lacquered Brass, 033 Vintage Brass, 044 Satin Brass PVD, 055 Polished Nickel PVD, 056 Lifetime PVD Satin Nickel, 060 Satin Brass Brown, 102 Oil Rubbed Bronze, 112 Venetian Bronze, 150 Satin Nickel, 151 Antique Nickel, 190 Satin Black, 260 Polished Chrome, and 402 Distressed Oil Rubbed Bronze. Those are Baldwin's standard finish numbers, so if you order by the same number as the levers and hinges already on the job, the bumper matches. Note that 031 Non-Lacquered Brass is a living finish and will darken over time rather than staying bright.
11) Does the Baldwin 4045 hold the door open, or does it only stop it?
It only stops the door. The 4045 is a bumper, a rubber-tipped brass post that cushions the swing and keeps the door and wall from taking the hit. It has no catch or holder to keep the door standing open. If you need the door to stay put once it's open, look at a stop and holder combination instead, like the Trimco 1209 series.
12) I am standardizing door stops across a portfolio of units. Should I use the Baldwin 4045 or a universal stop?
It depends on whether you are matching a finish program or reducing SKUs. The Baldwin Reserve 4045 is a Reserve Series wall bumper in solid forged brass, offered in 14 finishes including 003 Polished Brass PVD, 102 Oil Rubbed Bronze, 150 Satin Nickel, 190 Satin Black, and 260 Polished Chrome, so it lines up with Reserve trim already hanging on the doors and is classified for residential use. The Trimco 1211 series is a universal door stop line, which is the angle to take when one part number needs to serve openings with differing conditions. A common approach in mixed portfolios is the 4045 in finished front-of-house units and a universal stop in back-of-house and service areas.
13) Is a 3 inch Trimco floor stop a drop-in replacement for a Baldwin 4045?
No, and the shared 3 inch dimension is what makes this worth checking. The Baldwin Reserve 4045 carries a 3 inch projection as a wall bumper, with a hexagon section on the stem so it can be tightened without marring the finish and wood screw thread fasteners supplied for the wall substrate. The Trimco 1200/1201 is a cast floor stop at 3 inch, anchored into the floor on an entirely different footprint. Swapping one for the other means new holes in a different surface and leaves the original fastener holes exposed, so treat them as separate specifications rather than interchangeable sizes.
14) How many Baldwin 4045 bumpers do I get per order, and do I need to buy mounting hardware separately?
The 4045 is packed one per poly bag with its fasteners included, so each one you order is a complete stop ready to install. There is no separate mounting kit to add. If you're doing a whole floor of doors, order one per opening.
15) Is the Baldwin Reserve 4045 solid brass all the way through or brass plated?
Solid forged brass construction, not a plated pot metal body. That's what lets the hexagon section on the stem take a wrench without the part deforming, and it's why the 4045 comes in living finishes like 031 Non-Lacquered Brass that only work on real brass.
How fast can I get the Baldwin 4045402 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Baldwin 4045402 come with a warranty?
Absolutely. The Baldwin 4045402 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Baldwin 4045402?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Baldwin 4045402 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!