Baldwin Reserve Tube Full Dummy Leverset with Contemporary Rose

No latch, no lock, no turning function. The Baldwin Reserve Tube full dummy lever is a fixed pull that mounts to the door face and matches the appearance of an active passage, privacy or entry lever on neighbouring doors. Typical uses are closet doors, one leaf of a French pair, and inactive doors where you only need something to grab.

It goes into the standard 2-1/8 inch cross bore used for a normal cylindrical lockset, so a door already prepped for a passage or privacy lever takes it without new boring. The edge bore is 1 inch. If the door has no prep at all, a full dummy still needs that 2-1/8 inch hole drilled because the trim mounts through it.

It is catalogued as residential trim, aimed at home interiors. For commercial or high-traffic multi-family openings, look at a Grade 1 dummy trim instead, such as the BEST 9K Series 1DT single dummy or the Accentra 455LN Augusta heavy duty Grade 1 single dummy. The BEST 7KC Series 1DT is the Grade 2 medium duty step down.

A dummy will not hold a door shut. For a closet or hall door that needs a latch but no lock, a passage lever is the right call, for example the Bravura Atlanta or Orlando passage leverset with round trim, or the Tampa with square trim if you are matching square roses. For bed and bath, go privacy, such as the Kwikset 300BRNL Breton privacy lever.

The Baldwin Reserve Tube full dummy leverset is a residential Reserve Series trim. For a commercial corridor or institutional door, the BEST 9K Series 1DT single dummy trim lever is a Grade 1 heavy duty non-keyed dummy, the BEST 7KC Series 1DT is a Grade 2 medium duty dummy trim, and the Accentra 455LN Augusta is a Grade 1 heavy duty single dummy cylindrical lever in the 5400 Series.

The Baldwin Reserve Tube Tube lever with Contemporary rose is a dummy function, so it has no latch at all. If the door needs to latch, a passage lever is the swap: the Kwikset 200BRNL RDT Breton passage lever set is a Grade 3 passage/hall/closet lever for doors 1-3/8 inch to 1-3/4 inch thick, and the Callan Asheville CLN-AH5011 is a Grade 3 passage leverset in satin nickel. Both operate a latchbolt from either side with no locking.

A dummy has no privacy function, so for bed and bath use a privacy lever: the Kwikset 300BRNL RDT Breton is a Grade 3 privacy lever for doors 1-3/8 inch to 1-3/4 inch thick, and the Hager 2540 with Withnell lever is Grade 2 for doors 1-3/8 inch to 2 inch. The Baldwin Reserve Tube full dummy suits the fixed leaf of a double door or a closet where no latching is wanted.

Three contemporary rose shapes: CFR five inch rose, CRR round rose, and CSR square rose. Each comes in six finishes, 044 Satin Brass PVD, 055 Polished Nickel PVD, 112 Venetian Bronze, 150 Satin Nickel, 190 Satin Black and 260 Polished Chrome. The PVD finishes hold up better against handling wear than plated ones, which matters on a lever people grab all day.

Yes. Split rose and split finish are both available as write-in options at order time, so you can run one finish or rose shape toward a hallway and another toward the room. Spell out which side gets which when you order.

It carries no cylinder and no keyway at all, so there is nothing to key. What it does give you is matching appearance: the Reserve Series Tube lever with a contemporary rose reads the same as the active Reserve levers beside it, which is the whole point of specifying a dummy rather than leaving the door bare.

Among decorative residential dummy levers, Emtek offers the Arts and Crafts leverset in a dummy pair, the Hammered lever in a dummy pair, and the Classic Brass Cortina lever in a dummy pair. Like the Baldwin Reserve Tube full dummy, these are non-latching trim; the Baldwin carries the Contemporary rose in five inch, round, and square shapes.