You may also like
Barrel-Type Drift Pin, 11/16-Inch
3260 - spec sheet
Warnings
- Always wear approved eye protection.
Features
- Made in USA
- Tapers are uniform and blend into body diameter
- Black finish for rust resistance
- Machined from quality alloy steel
- Heat-treated for strength
- Tough, forged steel will properly end-pein in use
3260 - spec sheet
Manufacturer Resources
Spec Sheet
Product Specs
- Item Depth:
- 7.5000 in
- Item Height:
- 1.0000 in
- Item Weight:
- 0.6000 lbs
- Item Width:
- 1.0000 in
- Overall Length:
- 7.5" (19.1 cm)
- Point Diameter:
- 0.313" (7.95 mm)
- Department:
- Electrical
- Product Group:
- Hand Tools
- Product Subgroup:
- Hammers & Wrenches
- Product Type:
- Punch & Chisel
- Product Details:
- Barrel
- Product Diameter:
- 0.688" (1.8 cm)
- Product Material:
- 8640 Steel
- Product Weight:
- 9.6 oz (272 g)
- Product Width:
- 1 in
- Product Height:
- 1 in
- Product Depth:
- 7.5 in
Klein Tools 3260 – Frequently Asked Questions
1) Is a barrel-type drift pin the right choice, or should I use a tapered bull pin?
Barrel type, like the 3260, carries a full-diameter body with uniform tapers that blend into that body, so it holds alignment through the whole thickness of the connection rather than only wedging at the tip. A long tapered bull pin is better when you need to pull badly misaligned holes together over a longer draw. For lining up bolt holes in steel, ductwork flanges, and strut connections where the holes are close to aligned already, the barrel type is what you want.
2) Can you hit this drift pin with a hammer without it mushrooming apart?
It is forged steel, heat treated for strength, and made to properly end-pein in use, meaning the struck end deforms gradually instead of chipping. Machined from 8640 alloy steel. Wear approved eye protection whenever you strike it.
3) Will the Klein 3260 drift pin rust if it lives in a tool pouch on an outdoor job?
The 3260 carries a black finish for rust resistance over the alloy steel body. It is a working finish, not plating, so it will wear at the struck end and along the taper with use.
4) What is the Klein part number for the 11/16-inch barrel drift pin, and is it US made?
Order it as Klein Tools 3260. It is the 11/16 inch barrel-type drift pin, made in the USA, 7.5 inches overall.
How fast can I get the Klein Tools 3260 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Klein Tools 3260 come with a warranty?
Absolutely. The Klein Tools 3260 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Klein Tools 3260?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Klein Tools 3260 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.