BEA 10PS12-24 UL/ULC Listed Po...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$395.82
$248.00
BEA BEA 10PS12-24 - UL/ULC Listed Power Supply; Input 115 VAC/60HZ, Output 12/24 VDC - 1.75 A 10PS12-24

BEA 10PS12-24 UL/ULC Listed Power Supply 115VAC Input 12/24VDC Output 1.75A

(No reviews yet) Write a Review

Model: BEA-10PS12-24

In Stock (leaves warehouse same day if ordered before 3pm ET)

$395.82
$248.00
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

BEA 10PS12-24 UL/ULC Listed Power Supply 115VAC Input 12/24VDC Output 1.75A

Professional Power Supply Solution for Electronic Access Control Systems

The BEA 10PS12-24 is a UL/ULC listed power supply designed to convert 115VAC/60Hz input to dual-voltage 12/24VDC output at 1.75 amperes. This commercial-grade power supply provides reliable current conversion for electronic access control applications, delivering the appropriate voltage, current and frequency to power connected loads. UL/ULC certification ensures compliance with safety standards for professional installations.

Professional Features & Benefits

  • Dual Voltage Output: Provides both 12VDC and 24VDC output options from a single unit for flexible system integration.
  • UL/ULC Listed Certification: Meets rigorous safety and performance standards for commercial and institutional applications.
  • 1.75 Ampere Capacity: Sufficient current output to power multiple access control devices and components.
  • Standard Input Voltage: 115VAC/60Hz input matches standard North American electrical systems for easy installation.
  • Mounted Design: Designed for permanent installation in electrical enclosures or control panels.
  • Professional Grade Construction: Engineered for reliable operation in demanding commercial access control environments.

Technical Specifications

  • Model: 10PS12-24 UL/ULC Listed Power Supply
  • Input: 115 VAC / 60 Hz, 0.6 amp
  • Output (12 VDC setting): Max. Stand-by Load DC: 1.75 amp | Max. Alarm Load DC: 1.75 amp
  • Output (24 VDC setting): Max. Stand-by Load DC: 1.75 amp | Max. Alarm Load DC: 1.75 amp
  • Battery (optional): 12 VDC
  • Visual Indicators: AC input and DC output LED indicators
  • Supervision: AC fail supervision (form C contacts); Short circuit and thermal overload protection
  • Fire Alarm Interface: AC input trigger input
  • Enclosure Dimensions: 7.5 in (W) x 8.5 in (H) x 3.5 in (D)
  • Norm Conformance: UL Listed (UL294); CUL Listed - CSA Standard C22.2 No.205-M1983; CSFM; MEA; NFPA 101

Installation & Operation

  1. Verify electrical requirements match available power supply. Confirm voltage 115VAC/60Hz and current capacity before proceeding.
  2. Disconnect power supply before beginning installation. Follow all applicable electrical codes and safety procedures.
  3. Mount the unit in the specified location ensuring adequate clearance for wiring access, ventilation, and future service requirements.
  4. Route and connect wiring according to manufacturer wiring diagrams. Use appropriate wire gauge and connectors for the application.
  5. Configure operational settings including output voltage selection per application requirements.
  6. Restore power and test all functions including normal operation and integration with connected systems.
  7. Complete final inspection and document settings. Refer to manufacturer documentation for complete wiring diagrams, programming instructions, and troubleshooting.

Professional Applications

  • Commercial Building Security Systems
  • Electronic Access Control Installations
  • Automatic Door Operator Systems
  • Security Camera and Monitoring Equipment
  • Card Reader and Keypad Systems
  • Electronic Lock and Strike Power
  • Sensor and Detection Device Power

Why Choose BEA Quality?

BEA power supplies deliver professional-grade reliability with UL/ULC listed certification for demanding commercial applications. The 10PS12-24 provides dual-voltage flexibility with 1.75 ampere capacity to support multiple connected devices. Engineered for demanding commercial applications where dependable power conversion is essential.

Manufacturer Resources

BEA Product Catalog

Product Specs

Product Type:
Power Supply
Commercial/Residential:
Commercial
Electronic:
Yes
Product Group:
Electronic Access Controls
Product Subgroup:
Parts and Accessories
Subcategory:
Parts and Accessories
Product Category:
Electronic Access Control
Department:
Door Hardware

BEA BEA-10PS12-24 – Frequently Asked Questions

1) Will the BEA 10PS12-24 power supply run my 24VDC electric strikes, or is it 12V only?
Both. The 10PS12-24 is a selectable output supply, so you set it for either 12VDC or 24VDC, and it delivers 1.75 amps at whichever setting you choose. Output voltage selection is part of the commissioning step, so pick it before you energize the board. One unit covers a 12V strike job and a 24V mag or operator job, which is why it gets specified where a building has a mix.
2) How many door devices can a 1.75 amp power supply actually run?
Add up the holding or operating current of everything on the circuit and stay under 1.75 amps DC total, at either the 12V or 24V setting. That is the max standby load and also the max alarm load, so there is no extra headroom that appears only in alarm condition. If your load list runs past that, step up: ZenSupply carries the DynaLock 5800 Series at 3A continuous and the 5900 Series at 6A continuous, both also selectable 12/24VDC. Sizing this at install is cheaper than discovering it when four strikes fire at once.
3) Is the BEA 10PS12-24 UL listed for access control?
UL Listed under UL294, the access control standard, and cUL listed to CSA C22.2 No. 205-M1983. It also carries CSFM and MEA listings and conforms to NFPA 101. For an institutional or government spec that calls out a UL294 listed power source for the access control system, this meets it as written.
4) Will the 10PS12-24 release the locks on a fire alarm?
The 10PS12-24 has an AC input trigger input for fire alarm interface, so an alarm signal drops the DC output and releases the connected locking devices. It also provides AC fail supervision through form C dry contacts, which you can run back to the panel to annunciate a loss of building power. That combination is what a fire marshal looks for on an egress opening with mags or fail-safe strikes.
5) The 1.75 amps on the BEA 10PS12-24 is not enough for my maglock run - what should I use instead?
Step up to the DynaLock 5800 Series, a power supply/charger with the same selectable 12/24VDC output but 3A continuous, or the DynaLock 5900 Series, which is selectable 12/24VDC at 6A continuous. Both keep the dual-voltage selection of the BEA 10PS12-24, which is fixed at 1.75 amp maximum standby and alarm load on both the 12VDC and 24VDC settings, so a heavier bank of maglocks, strikes or readers moves to the larger frame without changing the system voltage you designed around.
6) What input power does the 10PS12-24 need, and how much does it draw?
Standard North American line power: 115VAC at 60Hz, drawing 0.6 amp. That means a normal 120V branch circuit, hardwired, and you can size the circuit with everything else on it accordingly. It is not a 220/240V unit and it is not a plug-in wall pack.
7) Does the BEA 10PS12-24 support a backup battery?
Yes, the 10PS12-24 accepts an optional 12VDC battery for standby. Note the battery input is 12VDC regardless of which output setting you run, so a 24V lock circuit still uses 12V battery stock. Batteries are ordered separately from the supply.
8) BEA 10PS12-24 vs DynaLock 5725: which power supply should I use for an access control job?
They land in similar territory. The 5725 Series is a power supply/charger with selectable 12/24VDC at 1.5A continuous, dual lock outputs, an auxiliary output and a supervised fire alarm interface, so it suits an install where you want the lock circuits split at the board. The BEA runs slightly higher at 1.75A with fire alarm trigger input and form C AC fail supervision, and carries UL294 and cUL listings. If the job needs separate switched lock outputs, look at the DynaLock; if it needs the extra current and the listed conformance called out on the drawing, the BEA.
9) Can the BEA 10PS12-24 power an automatic door operator and card readers off the same unit?
That is the intended use. The 10PS12-24 is built for commercial access control: automatic door operator systems, card readers and keypads, electric locks and strikes, sensors and monitoring equipment. The limit is not the device type, it is the total draw, which has to stay inside 1.75 amps at the voltage setting you choose. Mixed 12V and 24V devices on one supply do not work, since the output is one selected voltage for the whole unit.
10) How do the DynaLock 5800 and 5900 differ from each other when sizing against a BEA 10PS12-24?
Both are power supply/chargers with selectable 12/24VDC output; the difference is capacity. The DynaLock 5800 Series is rated 3A continuous and the DynaLock 5900 Series 6A continuous. The BEA 10PS12-24 sits below both at 1.75 amp maximum load on either voltage setting, in a 7.5 in W x 8.5 in H x 3.5 in D enclosure. Total the holding current of every lock, strike and reader on the circuit, add the recharge draw of any standby battery, and pick the frame whose continuous rating covers that sum.
11) How do I tell if a BEA 10PS12-24 has failed or is just not getting line power?
There are separate LED indicators for AC input and DC output, so a dark AC LED points upstream to the breaker or the feed, while AC present with no DC output points at the board or a tripped protection condition. The unit has short circuit and thermal overload protection, so a shorted lock circuit or an overheated enclosure will shut the output down rather than damage the supply. Clear the fault and the output recovers.
How fast can I get the BEA BEA-10PS12-24 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the BEA BEA-10PS12-24 come with a warranty?
Absolutely. The BEA BEA-10PS12-24 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the BEA BEA-10PS12-24?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the BEA BEA-10PS12-24 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!