You may also like
Bell Hanger Drill Bit Dia 1/4" 13" Carb tip Fish Hole (1pc)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Pouch
- Product Group:
- Power Tools & Accessories
- Sub Division:
- Electrical-E H2
- Department:
- Tools
- Product Subgroup:
- Hole Saws & Bits
- Product Type:
- Drill Bit
Metallics BHDM1 – Frequently Asked Questions
1) Does the Metallics BHDM1 have a fish hole for pulling wire?
It does. The BHDM1 is drilled with a fish hole near the tip, so once the bit is through the wall you hook your fish line or wire to the bit and pull it back out with the bit. That is the whole point of the bell hanger pattern versus a standard twist drill.
2) Will a 1/4 inch bell hanger bit drill through masonry or just wood?
The BHDM1 is carbide tipped, which is what lets it work in masonry, brick, and block as well as wood and plaster. A plain high-speed-steel bell hanger bit is wood-only; the carbide tip is the reason to pick this one if you are coming through a foundation wall or a brick exterior to run conduit or cable.
3) What size hole does the Metallics BHDM1 leave, and will a cable fit through it?
The bit cuts a 1/4 inch hole. That is sized for pulling a fish line or a single small low-voltage cable, not for NM building wire or a bundle. If you need to pass romex or multiple cat6 runs, drill a larger-diameter bell hanger bit and use this one for pilot work or single-conductor pulls.
4) What is the exact part number to order for the Metallics 1/4 inch by 13 inch bell hanger bit?
Metallics part number BHDM1. That is the full manufacturer designation for the 1/4 inch diameter, 13 inch carbide-tipped bell hanger bit with fish hole, and it is the number to quote to avoid getting the longer or larger-diameter versions in the same family.
5) How many bits come in a Metallics BHDM1 package?
One bit per package, supplied in a pouch. If you are standardizing a van or a facility maintenance crew on 1/4 inch bell hangers, order one BHDM1 per technician rather than expecting a multi-pack.
How fast can I get the Metallics BHDM1 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics BHDM1 come with a warranty?
Absolutely. The Metallics BHDM1 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics BHDM1?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics BHDM1 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.