You may also like
Bell MX1250S 1-Gang Flip Weatherproof Cover, Vertical/Horizontal, 12-in-1 Configuration, Gray Aluminum
Model: BELL-MX1250S
Bell MX1250S 1-Gang Flip Weatherproof Cover, Vertical/Horizontal, 12-in-1 Configuration, Gray AluminumThe Bell MX1250S is a 1-Gang Flip Weatherproof Cover built from durable aluminum for dependable...
Bell
$12.25
Bell MX1050S 1-Gang Flip Weatherproof Cover, Vertical/Horizontal, Gray Aluminum
The Bell MX1050S is a 1-Gang Flip Weatherproof Cover engineered for both vertical and horizontal mounting on standard single-gang device boxes. Built from durable aluminum with a metallic gray finish, this in-use cover features a 12-in-1 multi-configurable flip/snap design that adapts to a wide range of device layouts without swapping parts. It is UL Listed for reliable, code-compliant performance in exterior and wet-location applications, making it a practical choice for protecting receptacles and switches from the elements while keeping the installation looking clean.
Key Features
- Box Type: 1-Gang cover sized for standard single-gang device boxes.
- Durable Construction: Aluminum, metallic construction resists corrosion and withstands outdoor exposure.
- Cover Type: Flip/Snap cover design allows quick access to devices while keeping them protected when closed.
- Configuration: 12-in-1 multi-configurable layout supports vertical or horizontal device orientations from a single cover.
- Mounting Method: Multi-directional mounting adds flexibility when installing over existing single-gang boxes.
- Finish: Gray finish coordinates with common exterior wiring devices and wallplates.
- Depth: Low-profile 1.17 in. depth keeps the cover close to the wall surface for a neat installation.
Certifications & Compliance
- UL Listed
Technical Specifications
- Product Type: Weatherproof Covers
- Product Material: Aluminum
- Product Color: Gray
- Product Depth: 1.17 in
- Construction: Metallic
- Box Type: 1-Gang
- Configuration: Multi-Configurable
- Cover Type: Flip/Snap
- Mounting Method: Multi-directional
- Certified Listed: UL Listed
Typical Applications
- Outdoor Receptacle and Switch Protection
- Vertical or Horizontal Exterior Device Boxes
- Wet-Location Residential and Commercial Wiring
- Patio, Deck, and Exterior Wall Installations
- Renovation and New Construction Exterior Circuits
Why Bell?
Bell builds the MX1050S from rugged aluminum with a metallic gray finish and a UL Listed rating, giving installers a weatherproof cover that stands up to outdoor conditions while remaining easy to configure in the field. The 12-in-1 flip/snap design and multi-directional mounting simplify installation across vertical and horizontal device layouts, delivering dependable, code-compliant protection for exterior electrical devices on both new construction and renovation projects.
Manufacturer Resources
Spec Sheet
Product Specs
- list_batch:
- BELL-20260916
- Product Type:
- Weatherproof Receptacle Cover
- Product Material:
- Aluminum
- Product Color:
- Gray
- Product Depth:
- 1.17 in
- Construction:
- Metallic
- Box Type:
- 1-Gang
- Configuration:
- Multi-Configurable
- Cover Type:
- Flip/Snap
- Mounting Method:
- Multi-directional
- Certified Listed:
- UL Listed
- Department:
- Electrical
- Product Subgroup:
- Weatherproof Covers
- Product Group:
- Wiring Devices
Bell MX1050S – Frequently Asked Questions
1) Will the Bell MX1050S flip cover fit a single-gang box mounted sideways?
Yes. The MX1050S is a 1-gang cover with multi-directional mounting, so it goes on a single-gang device box in either vertical or horizontal orientation. The 12-in-1 multi-configurable flip/snap layout handles both device orientations without swapping to a different cover, which is why it works on retrofits where the existing box was set horizontally.
2) Is the MX1050S cover approved for a wet location outdoors?
The MX1050S is UL Listed and is built as a weatherproof in-use cover for exterior and wet-location work, protecting receptacles and switches on patios, decks, and exterior walls. Note it is an in-use flip/snap cover, not a listed while-in-use bubble cover assembly, so confirm the device behind it suits your circuit's requirements.
3) Can I use the MX1050S over a 2-gang exterior box?
No. It is sized for standard single-gang device boxes only. For a two-device exterior box you need a 2-gang weatherproof cover; putting a 1-gang cover on a 2-gang box leaves the opening unsealed.
4) How far does the Bell MX1050S stick out from the wall?
Depth is 1.17 inches. That is a low-profile projection for an in-use cover, which matters on tight exterior trim, behind furniture on a deck wall, or where a railing or downspout runs close to the box.
5) Will an aluminum weatherproof cover corrode on a coastal or high-humidity building?
The MX1050S is aluminum with metallic construction and a gray finish, which resists corrosion in outdoor exposure better than painted steel of the same shape. For exterior device boxes on multi-family or commercial exteriors, that is the usual reason to spec a metallic cover over a plastic one.
6) Do I need separate covers for a receptacle and a switch if I standardize on the MX1050S?
No. The multi-configurable 12-in-1 design covers a range of single-gang device layouts, duplex receptacles and switches among them, from one part number. For a property manager or MRO buyer stocking exterior covers across a portfolio, that means one SKU on the shelf instead of several device-specific plates.
7) What is the exact part number and finish to order for the Bell gray aluminum 1-gang flip cover?
Order Bell MX1050S. It is the 1-gang flip/snap weatherproof cover in gray aluminum, and there is a single configuration, so no handing, size, or finish choice to make on the order.
How fast can I get the Bell MX1050S delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bell MX1050S come with a warranty?
Absolutely. The Bell MX1050S is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bell MX1050S?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bell MX1050S from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.