Bemis 70TK Round Plastic Toile...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$29.43
Bemis Bemis 70TK Round Plastic Toilet Seat with Top-Tite Hinge BEMIS-70TK

Bemis 70TK Round Plastic Toilet Seat with Top-Tite Hinge

(No reviews yet) Write a Review

Model: 70TK 000
Selected Color is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$29.43
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

This traditional plastic seat is cost-effective and resists chips, wears and stains.

  • Basic Top-Tite hinge tightens from the top
  • Resilient plastic with molded-in color resists wear, chips and stains
  • Color-matched bumpers and hinges
  • Fits most manufacturers, round toilets
  • Made with eco-friendly materials and processes
  • 1 Year Limited Warranty

Product Specs

Hinge Material:
Plastic
Bolt Spread :
5.5
Country of Origin:
MX
Seat Height :
1.625
Seat Length:
16.688
Seat Width :
14.313
Product Group:
Washroom/Bath
Product Subgroup:
Toilet Seats
Product Type:
Toilet Seat
Product Shape:
Round
Product Material:
Plastic
Department:
Plumbing

Bemis 70TK 000 – Frequently Asked Questions

1) Will the Bemis 70TK fit a round toilet bowl, and how do I confirm before ordering?
The 70TK is a round seat, not elongated. Measure from the center of the seat bolt holes straight forward to the front rim of the bowl: a round bowl runs about 16-1/2 inches, an elongated bowl about 18-1/2. The 70TK seat measures 16.688 inches long and 14.313 inches wide, so it will overhang badly on an elongated bowl. It fits round bowls from most manufacturers.
2) What is the bolt hole spacing on the Bemis 70TK toilet seat?
Bolt spread is 5.5 inches center to center, which is the standard two-hole spacing on North American residential and commercial toilets. If the mounting holes on your bowl are 5-1/2 inches apart, the 70TK lines up.
3) Can I tighten this toilet seat without reaching up behind the bowl?
Yes. The 70TK uses a Top-Tite hinge, so the fasteners are tightened from above the bowl rather than by reaching underneath to hold a nut. For a maintenance tech swapping seats across a building, that is the difference between a two-minute job and lying on the floor behind the toilet.
4) Is the Bemis 70TK durable enough for a rental or multi-family property?
It's a solid plastic seat with molded-in color, so scratches and wear don't show a different color underneath the way a painted or wood-composite seat does. It resists chips and stains. Hinges and bumpers are color-matched plastic. For high-traffic commercial restrooms a commercial-grade open-front seat is usually specified instead, but for apartment and rental bathrooms this is the standard workhorse.
5) Is this a soft-close or slow-close toilet seat?
No. The 70TK is a standard free-dropping seat with a basic plastic Top-Tite hinge. If you need a seat that lowers slowly, look for a Bemis model specified with a slow-close or Whisper-Close hinge instead.
6) Do I need to buy mounting bolts separately for the Bemis 70TK?
No separate hardware purchase is needed. The seat ships with its Top-Tite hinge assembly and the fasteners that go with it, plus color-matched bumpers. Installation instructions and the spec sheet are both published by Bemis for the 70TK 000 if you want the step-by-step before you send a tech out.
7) How much height does the Bemis 70TK add to the toilet bowl?
Seat height is 1.625 inches, so it adds roughly an inch and five-eighths on top of the bowl rim. That matters if you're matching an existing ADA-height installation or replacing seats across a block of units and want the finished seating height to stay consistent.
8) What color does the Bemis 70TK round toilet seat come in?
White only, ordered as 70TK 000. The white is molded into the plastic rather than surface-applied, and the bumpers and hinges are matched to it, so a unit full of white fixtures stays consistent.
9) Where is the Bemis 70TK toilet seat made?
Country of origin is Mexico. Bemis also notes the seat is made with eco-friendly materials and processes, which is worth flagging if you're buying against a sustainability spec or a green purchasing policy.
How fast can I get the Bemis 70TK 000 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bemis 70TK 000 come with a warranty?
Absolutely. The Bemis 70TK 000 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bemis 70TK 000?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Bemis 70TK 000 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!