You may also like
Bemis 1240205 Elongated Plastic Toilet Seat fits Eljer Emblem with Top-Tite Hinge
Model: BEMIS-1240205
This specially shaped seat fits Eljer Emblem toilets. Made from durable plastic, this seat resists chips, wears and stains. The Top-Tite hinge with the Hex-Tite bolt system provides superior...
Bemis
$86.49
This specially shaped seat fits Eljer Emblem toilets. Made from durable plastic, this seat resists chips, wears and stains. The Top-Tite hinge with the Hex-Tite bolt system provides superior stability from a no-wobble installation.
- Fits Eljer Emblem round toilets
- Basic Top-Tite hinge tightens from the top for easy installation
- Resilient plastic with molded-in color resists wear, chips and stains
- Color-matched bumpers and hinges
- Proudly Made in the USA
- Made with eco-friendly materials and processes
- 1 Year Limited Warranty
Manufacturer Resources
Spec-Sheet-1240200 000
Product Specs
- Hinge Material:
- Plastic
- Bolt Spread :
- 5.5
- Country of Origin:
- US
- Seat Height :
- 2.188
- Seat Length:
- 16.813
- Seat Width :
- 14.5
- Product Group:
- Washroom/Bath
- Product Subgroup:
- Toilet Seats
- Product Type:
- Toilet Seat
- Product Shape:
- Round
- Product Material:
- Plastic
- Department:
- Plumbing
Bemis 1240200 000 – Frequently Asked Questions
1) What are the actual dimensions of the Bemis 1240200 round seat?
The seat measures 16.813 in length, 14.5 in width and 2.188 in height, with a 5.5 inch bolt spread at the hinge. Measure your bowl from the center of the bolt holes to the front outside edge of the rim: if that comes in around 16-3/4 inches you're in round-bowl territory and this seat lands. Anything closer to 18-1/2 inches is an elongated bowl and this is the wrong seat.
2) Can I install the Bemis 1240200 without getting behind the toilet?
Yes, and that's the point of the Top-Tite hinge. The Hex-Tite bolt tightens from the top of the seat, so you're never reaching up behind the bowl or into the wall gap with a wrench. On a close-coupled toilet in a tight bathroom or a bank of stalls where the fixtures sit close to a partition, that turns a two-person job into a one-hand job. It also pulls the seat down without wobble, which is what makes a seat last in a high-traffic washroom.
3) Is a plastic toilet seat durable enough for a rental or commercial washroom?
For rentals, multi-family and light commercial, plastic is usually the right call over wood. The 1240200 uses resilient plastic with molded-in color, so the color runs through the material instead of sitting on top as a painted or laminated surface. Chips and scuffs don't leave a white scar, and it resists wear and stains from repeated cleaning. Wood-core seats look better in a residential powder room but swell and delaminate once they take standing water or get hit with strong cleaners.
4) Are the hinges on the Bemis 1240200 plastic or metal?
Plastic hinges, color matched to the seat, along with color-matched bumpers. Plastic hinges won't corrode or stain the china the way a cheap metal hinge does when it starts to rust at the bolt, which matters in a hard-water building or anywhere the seat gets hosed down. The trade-off is that plastic hinges are not the choice for an abuse-prone public restroom, where a heavy-duty commercial seat with stainless hardware belongs.
5) Do I need to buy mounting bolts separately for the Bemis 1240200 toilet seat?
No. The seat ships with its Top-Tite hinge and the Hex-Tite bolt system that goes with it, so the mounting hardware is part of the seat, not a separate line item. Fit is on a 5.5 inch bolt spread through the standard two holes in the bowl. The only thing worth having on hand is a way to cut off the old corroded bolts if the existing seat has been on the fixture for years.
6) What color does the Bemis 1240200 seat come in?
White only, ordered as MPN 1240200 000. If you're standardizing seats across a building, white is the one that matches nearly every china color still in service and is the safest single SKU to stock on the truck. The bumpers and hinges are color matched, so nothing on the seat breaks the white.
7) Is the Bemis 1240200 made in the USA?
Yes, country of origin is the US, and Bemis states it's made with eco-friendly materials and processes. That matters on public and institutional work where domestic-preference language shows up in the purchase order, and for the sustainability-focused distributor who has to answer for where the goods came from.
8) Is there a spec sheet or installation guide for the Bemis 1240200?
Both are published for the 1240200 000: a manufacturer spec sheet and a separate installation guide covering the Top-Tite hinge. Worth pulling the spec sheet before a bulk order if you're matching seats across a property and need to confirm the bowl shape against what's already installed.
How fast can I get the Bemis 1240200 000 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bemis 1240200 000 come with a warranty?
Absolutely. The Bemis 1240200 000 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bemis 1240200 000?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bemis 1240200 000 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.