Bemis 1240205 Elongated Plastic Toilet Seat fits Eljer Emblem with Top-Tite Hinge

The 1240205 is shaped specifically for Eljer Emblem elongated bowls. It is an elongated seat measuring 18.375 inches long by 14.313 inches wide, with a 5.5 inch bolt spread, so the mounting hole spacing matches standard two-hole bowls. But the contour is cut for the Emblem, so on a generic elongated bowl you may see overhang or gaps at the rim. If your bowl is not an Eljer Emblem, order a standard elongated seat instead.

Measure from the center of the seat bolt holes at the back of the bowl to the front rim edge. Elongated bowls run about 18-1/2 inches; round front bowls about 16-1/2. The 1240205 is 18.375 inches long and 14.313 inches wide, and its bolt holes are set at 5.5 inches center to center, which is the usual spacing on a two-hole bowl. If your measurement comes up short at the front, you have a round bowl and need a round seat.

Top-Tite is a top-mount hinge: you tighten the Hex-Tite bolts from above the seat instead of reaching up behind the bowl. That means no crawling under the rim with a wrench, and the bolt system holds the seat from wobbling, which is the failure that generates most seat callbacks in apartments and public restrooms. For a property manager replacing seats across a building, it cuts install time per unit considerably.

Plastic. Both the seat and the hinge are plastic, and the hinges and bumpers are color matched to the seat. Plastic hinges will not corrode or stain from cleaners the way a chromed metal hinge can pit, but if your spec calls for a metal hinge for institutional abuse resistance, this is not that seat.

White only, ordered as 1240205 000. The color is molded into the plastic rather than applied as a surface coating, so scuffs and cleaning do not wear through to a different shade underneath. If you need to match a bone or biscuit Eljer fixture, this seat will not match it.

No separate hardware. The Top-Tite hinge with its Hex-Tite bolts and the color matched bumpers come as part of the seat, and the bolts tighten from the top, so a hand tool at the top of the seat is all the install takes.

The seat profile is 2.313 inches high. That is worth knowing if you are working to an ADA seat height target on the finished assembly, since the seat sits on top of the bowl rim and adds to the measured height to the top of the seat.

Yes, country of origin is the United States, and Bemis states it is made with eco-friendly materials and processes. That matters on government, education, and institutional orders where domestic sourcing or sustainability criteria are part of the bid.