You may also like
TRANS EYEBOLT Con 12-350 5/8X4 5OUT
Manufacturer Resources
Product Specs
- Connection Type:
- Mechanical
- Country Of Origin:
- United States (US)
- Insulation Material:
- None
- Number Of Conductors:
- 5
- Product Group:
- Wire & Cable Management
- Product Type:
- Eyebolt Multi-Tap Set-Screw Connector
- Selling Unit Of Measure:
- each
- Standards:
- ANSI C119.4
- Surface Finishing:
- Bare
- Temperature Range:
- up to 90 °C
- Type2:
- Wire connectors
- Wire Size:
- #12 to 350 kcmil
- Department:
- Electrical
- Product Subgroup:
- Connectors
- Product Size:
- 5-15/16 inch long, Stud Size 5/8 X 4
Blackburn ABP 5350 – Frequently Asked Questions
1) What wire sizes will the Blackburn ABP 5350 eyebolt connector accept?
The ABP 5350 takes conductors from #12 up to 350 kcmil in each of its five set-screw ports, so it handles everything from small control or grounding taps up to heavy service-size copper or aluminum runs on the same body.
2) How many taps can I land on a Blackburn ABP 5350?
Five. It is a five-outlet multi-tap set-screw connector, so one eyebolt landing feeds five separate conductors without stacking lugs.
3) What is the stud size on the ABP 5350 eyebolt connector, and how long is the body?
The eyebolt stud is 5/8 by 4 inches, and the connector body measures 5-15/16 inches long. Those two numbers decide whether it clears the enclosure or transformer pad you are mounting into, so check depth behind the landing before you buy.
4) Is the Blackburn ABP 5350 rated for aluminum as well as copper conductors?
It is a bare, uninsulated mechanical set-screw connector built to ANSI C119.4, the standard that covers connectors for use on distribution conductors. Blackburn ABP transformer eyebolt connectors of this type are dual-rated AL9CU, so confirm the AL9CU marking stamped on the body matches your conductor material before landing aluminum.
5) What temperature is the ABP 5350 connector good for?
Rated for conductor operation up to 90 degrees C, which lines up with THHN/THWN-2 and XHHW-2 at their 90 C rating. If your design is ampacity-limited at 75 C by termination rating elsewhere in the enclosure, that other device governs, not this connector.
6) Does the ABP 5350 come insulated or do I need to cover it?
It ships bare with no insulation, so the connector and all five taps need to be insulated in the field or enclosed in a suitably rated housing. Shrink boots or insulating covers sized for a 5-15/16 inch body are the usual approach.
7) Do I need a crimp tool or die set for this connector?
No. The ABP 5350 is a mechanical set-screw connector, so it lands with a hex key or torque wrench on the set screws. No hydraulic crimper or die set required, which is why it is common for field taps and transformer secondary work where compression tooling is not on the truck.
8) When should I use an eyebolt connector instead of a bolted lug or a compression tap?
An eyebolt style like the ABP 5350 threads onto an existing 5/8 inch stud or transformer bushing terminal and gives you five tap ports in one piece, so it is the choice when you have a single stud landing feeding multiple branch conductors. A bolted lug is one conductor per pad and needs a lug for each run. A compression tap gives a permanent connection but requires matched dies and cannot be reopened, while this set-screw body can be loosened and relanded during service.
9) Is the Blackburn ABP 5350 sold individually or in a pack?
Sold each, one connector per unit, so order the exact count of landings you need. It is US made.
How fast can I get the Blackburn ABP 5350 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn ABP 5350 come with a warranty?
Absolutely. The Blackburn ABP 5350 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn ABP 5350?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn ABP 5350 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.