You may also like
CU TP TERM LUG No6-14 3/16B
Manufacturer Resources
Product Specs
- Cable Size:
- 14-6 AWG
- Country Of Origin:
- United States (US)
- Current Rating:
- 50 A
- Insulation Material:
- N
- Product Group:
- Wire Connectors & Terminals
- Product Type:
- Compression Lug
- Selling Unit Of Measure:
- each
- Stud Size:
- 3/16 in
- Type2:
- Cable or wire lug
- Department:
- Electrical
- Product Subgroup:
- Lugs & Terminals
- Installation Category:
- Screw
- Product Material:
- Copper
Blackburn CS 35 TN – Frequently Asked Questions
1) What wire sizes does the Blackburn CS 35 TN terminal lug accept?
The CS 35 TN takes copper conductors from 14 AWG up to 6 AWG. One lug per conductor, sold individually.
2) Can I use this lug on aluminum conductors?
No. The CS 35 TN is a copper lug rated for copper conductors only. For aluminum or AL/CU service you need a lug specifically marked AL9CU or dual-rated.
3) Is this a crimp lug or a set-screw lug?
It is a mechanical screw-type termination, so the conductor is clamped under a screw rather than crimped. No hydraulic or ratchet crimp tool or die set is needed, which is why it suits field work and panel changeouts where you do not want to haul a crimper.
4) How much current can the Blackburn CS 35 TN carry?
Rated 50 A. That covers the ampacity range you would normally see on 14 through 6 AWG copper branch and control conductors, so match the lug to the conductor's own rating rather than pushing the lug.
5) How many of these lugs do I need for a three-phase feeder termination?
One CS 35 TN per conductor, since the lug is sold each and accepts a single 14 to 6 AWG copper conductor. A three-phase circuit with a neutral and a ground means five lugs at that end, and double that if you are terminating both ends.
6) Does the CS 35 TN come insulated?
No insulation. The lug body is bare copper, so where you need it covered, tape or heat-shrink the barrel after you make up the connection.
7) Is the Blackburn CS 35 TN made in the USA?
Yes, country of origin is the United States. That matters on government, institutional, and Buy American specified jobs where domestic origin has to be documented.
How fast can I get the Blackburn CS 35 TN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn CS 35 TN come with a warranty?
Absolutely. The Blackburn CS 35 TN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn CS 35 TN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn CS 35 TN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.