You may also like
AL COMP REDUCER 750-600 AL/CU
Manufacturer Resources
Product Specs
- Connection Type:
- Compression
- Country Of Origin:
- United States (US)
- Insulation Material:
- None
- Product Group:
- Wire & Cable Management
- Product Type:
- Compression Splice Service Entrance Insulated
- Selling Unit Of Measure:
- each
- Standards:
- ANSI C119.4
- Surface Finishing:
- Tin Plated
- Type2:
- Wire or cable compression splice
- Department:
- Electrical
- Product Subgroup:
- Splices
- Product Size:
- 6.250 inch long, Outside Diameter 1.594 inch.
Blackburn SAC 750 CPTR600CPTTN – Frequently Asked Questions
1) What does the Blackburn SAC 750 CPTR600CPTTN reducer connect?
It's an aluminum compression reducer that joins 750 kcmil to 600 kcmil conductor, rated AL/CU so it can be used on aluminum or copper cable. It is a compression splice, meaning it is crimped with a die tool rather than bolted or set-screwed.
2) Is this Blackburn reducer pre-insulated, or do I need to tape or heat shrink it?
No insulation is supplied on the body, so the splice has to be insulated in the field with tape, heat shrink, or a cold shrink sleeve per your installation practice. Plan for that material on the job.
3) Can I use this Blackburn reducer to splice aluminum cable to copper?
Yes. The connector is AL/CU rated and tin plated, which is what allows it to be used on aluminum or copper conductor without a dissimilar metal problem at the contact surface.
4) How much room do I need in the pull box or gutter for this 750-600 compression reducer?
The body is 6.250 inches long with a 1.594 inch outside diameter, before you add insulating tape or shrink sleeve. Bending space and box fill should be checked against that length, since a long barrel splice in a tight gutter is the usual problem.
5) Does this compression splice meet a recognized connector standard for inspection?
It is built to ANSI C119.4, the standard covering connectors for use between aluminum and copper conductors. That is the reference an inspector or a spec writer usually asks for on a service entrance splice.
6) Can I install this reducer with a set screw or bolted lug tool instead of a crimper?
No. It is a compression-only connector and must be crimped with the correct die set for the barrel. There are no set screws or bolts on it, so a mechanical lug tool won't make the connection.
7) Is this reducer sold individually or in a bag?
Sold each, so order one per splice. On a three phase service entrance reduction that is three, plus whatever you need for the neutral.
8) Is the Blackburn SAC 750 CPTR600CPTTN made in the USA?
Country of origin is the United States. Useful if you are working a government or institutional job with domestic sourcing language in the spec.
How fast can I get the Blackburn SAC 750 CPTR600CPTTN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn SAC 750 CPTR600CPTTN come with a warranty?
Absolutely. The Blackburn SAC 750 CPTR600CPTTN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn SAC 750 CPTR600CPTTN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn SAC 750 CPTR600CPTTN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.