You may also like
TAPERED ALUM SPLICE 700-750
Manufacturer Resources
Product Specs
- Connection Type:
- Compression
- Country Of Origin:
- United States (US)
- Insulation Material:
- None
- Number Of Conductors:
- 2
- Product Group:
- Wire & Cable Management
- Product Type:
- Compression Splice Service Entrance Insulated
- Selling Unit Of Measure:
- each
- Standards:
- ANSI C119.4
- Surface Finishing:
- Bare
- Type2:
- Wire or cable compression splice
- Department:
- Electrical
- Product Subgroup:
- Splices
- Product Size:
- 7 inches long
Blackburn SATC 750 – Frequently Asked Questions
1) What conductor size does the Blackburn SATC 750 aluminum splice take?
The SATC 750 is sized for 700 through 750 conductor, which is what the "700-750" in the description refers to. It is a two-conductor splice, so one cable goes in each end and gets crimped. If your cable falls outside that 700-750 range, this is the wrong barrel and you need the size below or above it.
2) Is the SATC 750 splice insulated, or do I have to insulate it after crimping?
It is a bare aluminum splice with no insulation on it. You insulate in the field, typically with heat shrink or tape build-up, unless it is landing somewhere insulation is not required. Plan that material into the job before you're at the pole or the gutter.
3) Does the Blackburn SATC 750 need a compression tool, or can it be bolted?
Compression only. This is a crimp barrel, not a set screw or bolted connector, so it needs a hydraulic compression tool with the correct die for the barrel. If you want a connection you can install with a wrench and re-tension later, a mechanical set screw splice is the type to look for instead.
4) Will a 700-750 aluminum compression splice fit inside my meter socket or splice box?
The barrel runs 7 inches long, and that is before you add any field-applied insulation or account for the bend radius on 750 cable at each end. Check the clear dimension in the enclosure or handhole against that 7 inches plus your cable sweep before you commit to splicing inside it.
5) Does the Blackburn SATC 750 splice meet ANSI C119.4 for underground and enclosed connections?
Yes, it is built to ANSI C119.4, the standard covering connectors for use between aluminum and copper conductors. That is the reference most utility and commercial service entrance specs call out, so it satisfies the usual submittal line for a compression splice.
6) Can I use the SATC 750 on a copper to aluminum transition?
The SATC 750 is an aluminum-bodied splice built to ANSI C119.4, the standard governing connectors used between aluminum and copper conductors. Follow the manufacturer's conductor marking on the barrel for what it is rated to accept, and use an oxide inhibitor on aluminum runs as you would on any aluminum compression connection.
7) How is the SATC 750 splice sold, individually or by the box?
Sold each, not by the carton, so order one per splice point. On a three-phase service entrance with a neutral that is typically four pieces per splice location.
8) Is the Blackburn SATC 750 made in the USA for Buy American jobs?
Country of origin is the United States, which is what federal, municipal, and utility contracts with domestic-content language usually want documented on the submittal.
How fast can I get the Blackburn SATC 750 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Blackburn SATC 750 come with a warranty?
Absolutely. The Blackburn SATC 750 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Blackburn SATC 750?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Blackburn SATC 750 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.