Bobrick B-204-1 Shower Curtain Hook

Yes. The B-204-1 hook is made for both 1 inch and 1-1/4 inch (25 and 32mm) diameter shower curtain rods, so it rides on either of the two common commercial rod sizes without swapping hardware. If your rod is larger than 1-1/4 inches in diameter, this hook is the wrong one.

Count on 7 hooks for a 42 inch curtain and 12 for a 70 inch curtain, which are the two Bobrick curtain widths (B-204-2 and B-204-3). The B-204-1 is sold as a single hook, so order per opening: a building with ten 70 inch curtains needs 120 hooks. Buying a few extra per floor is normal practice since hooks are the part that walks off.

The B-204-1 is Type 304 stainless steel, the standard corrosion-resistant grade for washroom accessories in constant wet service. That is why it holds up in shower environments where plated or painted hooks pit and streak. The finish is satin.

Yes, as long as the curtain has grommets and your rod is 1 inch or 1-1/4 inch diameter. The hook's fit is set by the rod diameter, not by the curtain brand. Bobrick states the hook counts against its own 42 inch and 70 inch curtains, so for a third-party curtain go by its grommet count instead.

Bobrick classes the B-204-1 as a residential accessory, so it suits apartments, multi-family units, hotel guest baths, and similar traffic. The Type 304 stainless body is the same corrosion-resistant material used across washroom hardware, but for high-abuse institutional showers, prisons, or locker rooms, look at a security or vandal-resistant hook instead of this one.