Bobrick B-2908 1830 Tempered G...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$250.97
$208.37
Bobrick B-2908 1830 Tempered Glass Welded Frame Mirror

Bobrick B-2908 1830 Tempered Glass Welded Frame Mirror

(No reviews yet) Write a Review

Model: 2908 1830

In Stock (leaves warehouse same day if ordered before 3pm ET)

$250.97
$208.37
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Bobrick B-2908 1830 Tempered Glass Welded Frame Mirror

One-piece, roll-formed 3/4″ x 3/4″ (19 x 19mm) angle-frame. Type 304 stainless steel angle with satin finish. Corners heliarc welded ground and polished smooth. Beveled frame edge at mirror for improved appearance. 1/4″ (6mm) tempered glass mirror. Galvanized steel back. Secured to concealed wall hanger with theft-resistant mounting. Tempered glass mirrors resist breakage and provide a measure of safety from broken glass, but differ in color and reflective quality from standard glass mirrors. Bobrick uses the highest quality tempered glass mirrors. Modest distortion or heat-generated markings are normal in the tempered glass mirror manufacturing process. Therefore, Bobrick will not accept returns of tempered glass mirrors with random distortion or markings.

Available in the following sizes:

  • B-2908 1830: 18″ W x 30″ H (46 x 76cm)
  • B-2908 1836: 18″ W x 36″ H (46 x 91cm)
  • B-2908 2436: 24″ W x 36″ H (61 x 91cm)

Features

  • 1/4″ tempered glass mirror
  • Surface Mounted
  • 18″ W x 30″ H
  • Beveled frame edge and galvanized steel back
  • Concealed wall hanger with theft-resistant mounting

Product Specs

  • Frame Finish : Satin Finish Stainless Steel
  • Type : Welded-Frame
  • Glass Type : Tempered
  • Accessibility : ADA Compliant

Resources

Manufacturer Resources

Product Specs

Installation Type:
Wall Mounted
Product Type:
Mirrors
Product Group:
Washroom/Bath Accessories
Product Subgroup:
Mirrors
Department:
Plumbing

Bobrick 2908 1830 – Frequently Asked Questions

1) What sizes does the Bobrick B-2908 welded frame mirror come in?
Three sizes: 18 x 30 inches (46 x 76cm), 18 x 36 inches (46 x 91cm), and 24 x 36 inches (61 x 91cm). The model suffix is the size, so B-2908 1830 is the 18 by 30, B-2908 1836 the 18 by 36, and B-2908 2436 the 24 by 36. Width comes first in each pair.
2) Is the B-2908 mirror safety glass for a school or gym restroom?
The glass is 1/4 inch (6mm) tempered, which resists breakage and reduces the hazard from broken glass. That is why it gets specified in schools, locker rooms, and other high-abuse washrooms. Trade-off to know up front: tempered mirror differs in color and reflective quality from standard glass, and modest distortion or heat-generated markings are normal in the tempering process and are not considered defects.
3) How does the Bobrick B-2908 mirror mount to the wall, and can it be pulled off?
It's surface mounted on a concealed wall hanger. You fasten the hanger to the wall first, then the mirror hooks over it and locks down with theft-resistant mounting hardware, so there's nothing exposed to pry at the face of the frame. Standard approach for public and semi-public restrooms.
4) Which B-2908 size should I order to meet ADA mounting height over a lavatory?
The B-2908 is listed ADA compliant, but compliance depends on how you hang it: the reflecting surface has to start no higher than 40 inches above the floor at a lavatory. The taller 18 x 36 and 24 x 36 units give you more mirror above that line while still letting you set the bottom low, so they are the usual pick over a sink. The 18 x 30 works where you are tight on wall height. Width choice is about matching the lavatory or the adjacent openings, not about code.
5) Will the B-2908 mirror rust in a wet public restroom?
The frame is Type 304 stainless steel with a satin finish, one-piece roll-formed 3/4 by 3/4 inch angle, so the visible frame holds up to constant moisture and cleaning. The back is galvanized steel. Keep in mind the back panel is not stainless, so it should not be installed where the rear of the mirror sits in standing water or direct spray, such as an open shower wall.
6) What is the difference between a welded frame mirror and a channel frame mirror?
On a welded-frame mirror like the B-2908, the corners are heliarc welded, then ground and polished smooth, so there is no visible seam or sharp corner joint, and the frame edge is beveled where it meets the glass. A channel frame is simply roll-formed stock with mitered or lapped corners. The welded frame costs more and is what gets specified where the mirror is at eye level in a public washroom and the corner detail shows.
7) I'm replacing mirrors across a building. Will the B-2908 cover the old mounting holes?
Not necessarily. The B-2908 hangs on its own concealed wall hanger, which has its own fastener pattern, so plan on new anchors rather than reusing existing holes. If the outgoing mirrors are a different size, the shadow line and any unfinished wall behind them is the other thing to check before you standardize. Matching one of the three sizes, 18 x 30, 18 x 36, or 24 x 36, to what is coming off the wall is the easiest way to keep the patching to a minimum.
8) Can the B-2908 tempered mirror be returned if it has waviness or faint marks in the glass?
No. Slight distortion and heat-generated markings are a normal byproduct of tempering mirror glass, and Bobrick does not accept returns of tempered glass mirrors for random distortion or markings. If a perfectly flat, true reflection matters more than breakage resistance, specify a standard glass mirror instead.
How fast can I get the Bobrick 2908 1830 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bobrick 2908 1830 come with a warranty?
Absolutely. The Bobrick 2908 1830 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bobrick 2908 1830?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Bobrick 2908 1830 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!