You may also like
Bobrick B-357-48 Waste Receptacle
Bobrick 357-48 Plastic Waste Receptacle
Replacement waste receptacle is leak-proof molded polyethylene.
Removable for servicing.
Capacity: 0.8 Gallons
Dimensions: 8.31" H x 7" W x 3.77" D
Replacement Part for Bobrick Model No.:
B-357, B-3571, B-35715, B-3574, B-35745, B-3579 Combination Units (manufactured after May 1994)
Manufacturer Resources
Product Specs
- Product Type:
- Washroom Product
- Product Group:
- Washroom/Bath Accessories
- Product Subgroup:
- Waste Receptacle
- Product Category:
- Waste Receptacle
- Department:
- Plumbing
Bobrick 357-48 – Frequently Asked Questions
1) Is the Bobrick 357-48 the whole waste unit or just the inner container?
Just the inner container. It is the molded polyethylene receptacle that drops into an existing Bobrick combination unit cabinet. The cabinet, door, dispenser and mounting hardware are not part of it, so this is a service part for a unit already in the wall.
2) How much waste does the Bobrick 357-48 receptacle hold?
Capacity is 0.8 gallons, with the container measuring 8.31 x 7 x 3.77 inches. That is a small in-unit liner sized for a recessed or semi-recessed towel dispenser/waste combination, not a floor or free-standing receptacle, so plan servicing frequency accordingly in high-traffic restrooms.
3) Can housekeeping pull this receptacle out to empty it, or does the cabinet have to come off the wall?
It lifts out. The 357-48 is removable for servicing, so custodial staff empty it through the unit's service opening without touching the cabinet mounting. That matters if you're standardizing restroom service routes across a building.
4) Do I need to measure my Bobrick cabinet before ordering the 357-48?
Measuring the opening is a fair check, but model number is the better identifier here. Match the number stamped on your existing unit against B-357, B-3571, B-35715, B-3574, B-35745 or B-3579, and confirm the unit was built after May 1994. If it lines up, the 8.31 x 7 x 3.77 inch container drops straight in.
5) Will the Bobrick 357-48 liner leak inside the cabinet from wet paper towels?
No. It is molded polyethylene and leak-proof, which is why Bobrick uses a plastic liner rather than bare metal inside the combination unit. Wet towels stay contained rather than wicking into the cabinet housing.
How fast can I get the Bobrick 357-48 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bobrick 357-48 come with a warranty?
Absolutely. The Bobrick 357-48 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bobrick 357-48?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bobrick 357-48 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.