You may also like
Bobrick B-7179 Surface-Mounted Automatic Hand Dryer
Model: BOB-B-7179
Bobrick B-7179 Surface-Mounted Automatic Hand Dryer
Seam welded stainless steel high-speed hand dryer with power consumption of just 200 watts. GreenSpec certified and ADA compliant with less than 4″...
Bobrick
Starting at
$1,692.60
Bobrick B-7125 InstaDry No-Touch Surface-Mounted Hand Dryer - 110-240V
This hand dryer has a built in safety switch that will shut off after 85 seconds if an inanimate object is placed across the air-outlet opening. Multiple units can be installed on the same circuit breaker, because this unit consumes very little power. It is constructed of an 18 gauge, type 304 stainless steel cover with a satin finish. This slim designed unit only projects 3 7/8" from the wall, and it meets the standards set forth by the ADA for accessible design. This hand dryer requires a 110-240V electrical connection for operation.
Features
- Contemporary design, ADA compliant surface-mounted high-speed hand dryer.
- Type 304 satin-finish, stainless steel dryer delivers a less than 12-second dry time and a best-in-class power rating of only 200 watts (0.2 kW.)
- Dryer is universal, with one model accommodating voltages from 110-240V.
- 110V– 240V AC,0.88-1.76 Amp, 50/60 Hz, 200 Watts, Single Phase, cULus Listed and CE marked.
Product Specs
- Finish : Satin-Finish Stainless Steel
- Material : Stainless Steel
- Mounting Options : Surface Mounted
- Accessibility : ADA Compliant
Resources
Manufacturer Resources
Product Specs
- Drying Time:
- 12 Seconds
- Installation Type:
- Surface Mounted
- Plug Type:
- Hardwire
- Product Style:
- Heated
- Product Type:
- Hand Dryers
- Features:
- ADA Compliant
- Product Group:
- Washroom/Bath Accessories
- Product Subgroup:
- Hand Dryers
- Product Material:
- Stainless Steel
- Department:
- Plumbing
- Product Depth:
- 3 7/8"
Bobrick 7125 – Frequently Asked Questions
1) Does the Bobrick B-7125 hand dryer need a plug or is it hardwired?
The B-7125 InstaDry is hardwired, so an electrician needs to bring a supply into the unit before it goes on the wall. It runs on 110-240V AC, 0.88-1.76 Amp, 50/60 Hz, single phase, and draws only 200 watts. There is no cord and plug option.
2) Can I put several InstaDry dryers on one circuit in a large restroom?
Yes. At 200 watts (0.2 kW) draw, multiple B-7125 units can share the same circuit breaker, which is the main reason facilities specify it when retrofitting a multi-station restroom without pulling new branch circuits. Confirm the total load against your breaker rating.
3) Will a surface-mounted hand dryer still meet ADA clearance in a narrow corridor?
The B-7125 projects 3-7/8 inches from the finished wall, which keeps it within the 4 inch protrusion limit for surface-mounted objects in a circulation path, and Bobrick states the unit meets ADA accessible design standards. That shallow depth is the reason it can go in tight vestibules where a bulkier dryer would need recessing.
4) Do I need a separate model for 208V or 240V service?
No. One B-7125 covers the whole range: it is a universal-voltage dryer accepting 110V through 240V AC at 50/60 Hz. That means a single part number can be standardized across buildings with different service, and there is no voltage variant to specify when ordering.
5) Is the Bobrick B-7125 a touchless dryer or do you have to press anything?
No-touch operation. Hands under the outlet start it, and a built-in safety switch cuts power after 85 seconds if an inanimate object is left across the air-outlet opening, so a towel or trash thrown over it will not run the motor indefinitely.
6) How long does the InstaDry take to dry hands compared with a warm-air dryer?
Under 12 seconds. It is a high-speed heated dryer, so throughput is far closer to a paper towel dispenser than to an older push-button warm-air unit, which matters in high-traffic washrooms where queueing is the complaint.
7) Will the stainless cover on the B-7125 hold up in a school or stadium restroom?
The cover is 18 gauge type 304 stainless steel in a satin finish. Type 304 resists the corrosion you get from constant humidity and cleaning chemicals, and satin hides fingerprints and scuffs better than a mirror finish, which is why it is a common pick for schools, arenas and transit washrooms. It is a cover, not an impact shield, so genuinely vandal-prone openings may still want a recessed unit.
8) Is the Bobrick InstaDry electrically listed for commercial installation?
The B-7125 is cULus Listed and CE marked, which is what an inspector or institutional spec will typically ask for on a hardwired washroom appliance in the US and Canada.
9) Does the B-7125 mount on the wall surface or does the wall have to be opened up?
Surface mounted. It fastens to the finished wall face with no recess cavity, so it suits tile or block walls and retrofits where cutting in a wall box is not practical. Because it is hardwired, plan for the electrical rough-in at the mounting location.
How fast can I get the Bobrick 7125 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bobrick 7125 come with a warranty?
Absolutely. The Bobrick 7125 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bobrick 7125?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bobrick 7125 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.