You may also like
Bolt M10 x 25 HXBT 10.9 PLN-ST (Jar 100)
Manufacturer Resources
Product Specs
- Division:
- Electrical H1
- Pack Type:
- Jar
- Product Family:
- Electrical Supplies
- Product Group:
- Fasteners
- Sub Division:
- Electrical-E H2
- Department:
- Electrical
- Product Subgroup:
- Bolts
Metallics JMBHC1025PL – Frequently Asked Questions
1) What size and grade is the Metallics JMBHC1025PL hex bolt?
It's an M10 x 25 mm hex head cap screw in property class 10.9, plain steel with no plating. The M10 refers to the 10 mm nominal thread diameter and the 25 is the shank length in millimeters under the head.
2) Is the Metallics M10 x 25 hex bolt plated or coated for corrosion resistance?
No. It's plain steel, uncoated. That's fine for dry interior work such as strut, panel, and enclosure mounting, but for damp or exterior locations you want a zinc plated, hot dip galvanized, or stainless fastener instead.
3) Can I use these metric bolts in imperial threaded strut nuts or channel?
No. M10 is a metric coarse thread and will not thread into imperial 3/8-16 or 1/2-13 strut nuts, even though M10 is dimensionally close to 3/8 inch. Match metric bolts to metric nuts and metric tapped holes only.
4) What does class 10.9 mean on a metric bolt, and is it strong enough for structural bracket work?
Class 10.9 is a high strength metric grade, roughly the metric counterpart to SAE Grade 8 in imperial fasteners, and it is the usual choice for machine and structural bracket connections where a general purpose 8.8 bolt is not enough. The JMBHC1025PL is a 10.9 bolt in M10 x 25.
5) How many bolts come in the Metallics JMBHC1025PL package?
100 pieces, supplied in a jar rather than a loose bag or box, which keeps them sorted on a shop shelf or in a van bin.
6) Do nuts and washers come with the Metallics M10 hex bolts?
Bolts only, 100 to the jar. Matching M10 hex nuts and flat or lock washers are separate line items, and you'll want nuts of an equivalent strength class so the joint isn't limited by the nut.
7) What wrench or socket size does an M10 hex bolt take?
Metric M10 hex cap screws normally take a 16 mm or 17 mm hex, depending on the head standard the run was made to. Check one bolt out of the jar before you send crews out with a single socket size.
How fast can I get the Metallics JMBHC1025PL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JMBHC1025PL come with a warranty?
Absolutely. The Metallics JMBHC1025PL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JMBHC1025PL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JMBHC1025PL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.