You may also like
Bolts 10-24 x 1/2 HXBT SS (Jar 100)
Features
- Used in products that require general atmospheric corrosion resistance, such as chemical and food-processing equipment. Some chemical environments may require special corrosion resistant materials and precautions.
- 18-8 and 316 stainless steel cap screws are both made from austenitic alloy
Additional Notes
- Other sizes and quantities available by request
Manufacturer Resources
Product Specs
- Arra Compliant:
- C
- Buy American Compliant:
- C
- Division:
- Electrical H1
- Fastener Head Type:
- Hex
- Fastener Length:
- 2-Jan
- Hardness:
- Rockwell B80-C32
- Language Code:
- EN
- Neurspe:
- https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Hex_Bolt_Dom_18-8_SS_316_SS.pdf
- Order Minimum Imperial:
- 100
- Order Minimum Uom Imperial:
- CT
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Product Height:
- 2.15 in
- Product Length:
- 3 in
- Product Weight:
- 336 g
- Product Width:
- 76.2 MM
- Sub Division:
- Electrical-E H2
- Tensile Strength:
- 85000 - 140000 psi minimum
- Thread Per Inch:
- 24
- Yield Strength:
- 45000 psi minimum
- Department:
- Electrical
- Product Subgroup:
- Bolts
- Product Type:
- Hexagonal Bolt
- Type2:
- Hexagonal Bolt
- Series:
- SBHC and JSBHC
- Product Details:
- Hexagonal Bolt
- Product Material:
- 18-8 Stainless Steel
Metallics JSBH101 – Frequently Asked Questions
1) Will these stainless hex bolts hold up outdoors or in a washdown area?
They're 18-8 stainless steel, which handles general atmospheric corrosion, so outdoor and damp indoor use is fine. The material is also used in chemical and food processing equipment. Aggressive chemical exposure is a different matter, and in that case you want 316 stainless or another specialty alloy rather than 18-8.
2) Are these 18-8 stainless bolts strong enough for structural or load-bearing work?
Tensile strength runs 85,000 to 140,000 psi minimum with a 45,000 psi minimum yield, and hardness is Rockwell B80 to C32. That covers equipment assembly, enclosure and strut hardware, and general mounting. Stainless like this is not a substitute for a graded carbon steel structural bolt, so if a drawing calls out a grade for a load path, match the grade the spec names.
3) How many bolts come in a jar of Metallics JSBH101?
100 pieces per jar, and 100 count is the order minimum, so a jar is the smallest buy. Jar packaging is what keeps a 1/2 inch fastener from scattering in a service van or on a parts shelf. Metallics lists other sizes and quantities by request.
4) Do Metallics JSBH101 bolts meet Buy American or ARRA requirements on a public project?
Metallics lists the JSBH101 as both ARRA compliant and Buy American compliant, with country of origin China. On a federally funded job, give the compliance flags and the origin to the specifying engineer together, since some contracts accept the compliance designation and others enforce a domestic melt and manufacture requirement.
5) Is a hex bolt the right choice here, or should I use a hex cap screw or machine screw?
A hex head is what you want when the fastener gets driven with a wrench or socket rather than a driver, which matters in an electrical enclosure or on equipment where you need controlled torque and no cam-out. In 10-24 x 1/2 the alternative is a slotted or Phillips machine screw, easier in tight quarters but far less torque capacity. The JSBH101 is the hex-head version in 18-8 stainless.
6) Will 18-8 stainless hex bolts cause galvanic corrosion against aluminum or galvanized steel?
Stainless against aluminum or zinc-coated steel is a dissimilar-metal pairing, and in wet or salt-exposed locations the aluminum or zinc is the part that sacrifices. For dry interior use it's a non-issue. Outdoors, isolate with a nylon or neoprene washer, or stay with the same metal family. The 18-8 bolt itself resists general atmospheric corrosion.
7) What does a jar of 100 JSBH101 bolts weigh for a van stock or shipping list?
336 grams, roughly 12 ounces, for the jar of 100. Light enough to carry several sizes on a service truck without a weight penalty.
How fast can I get the Metallics JSBH101 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSBH101 come with a warranty?
Absolutely. The Metallics JSBH101 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSBH101?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSBH101 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.