Metallics JBHC89 Bolts 1/2-13 ...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$52.61
$3.39
Metallics JBHC89 Bolts 1/2-13 X 3-1/4 Hxbt St-zn (Jar 25)

Metallics JBHC89 Bolts 1/2-13 X 3-1/4 Hxbt St-zn (Jar 25)

(No reviews yet) Write a Review

Model: JBHC89
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$52.61
$3.39
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Bolts 1/2-13 X 3-1/4 Hxbt St-zn (Jar 25)

  • Additional Notes

    • Other sizes and quantities available by request

Manufacturer Resources

Product Specs

Arra Compliant:
N
Buy American Compliant:
No
Division:
Electrical H1
Fastener Head Height:
Nov-32 in.
Fastener Head Type:
Hex
Fastener Head Width:
0.725 - 0.750 in.
Fastener Height:
0.302 - 0.364
Fastener Length:
3/1/04
Fastener Width:
0.826 - 0.866
Language Code:
EN
Order Minimum Imperial:
25
Order Minimum Uom Imperial:
EA
Outside Diameter:
0.482 - 0.515 IN
Pack Type:
Jar
Product Group:
Fasteners
Sub Division:
Electrical-E H2
Thread Per Inch:
13
Thread Standard:
ASME B18.2.1-1996
Department:
Electrical
Product Subgroup:
Bolts
Product Type:
Hexagonal Bolt
Type2:
Hexagonal Bolt
Series:
BHC and JBHC
Product Finish:
Zinc
Product Details:
Hexagonal Bolt
Product Material:
Steel

Metallics JBHC89 – Frequently Asked Questions

1) What thread size and length is the Metallics JBHC89 hex bolt?
It is a 1/2-13 x 3-1/4 inch hex bolt, so 1/2 inch nominal diameter with 13 threads per inch (UNC coarse) and 3-1/4 inches of length under the head. Measured shank outside diameter runs 0.482 to 0.515 inch. Thread form follows ASME B18.2.1-1996, so it mates with any standard 1/2-13 nut or tapped hole.
2) Will the Metallics JBHC89 bolt qualify on a Buy American or ARRA funded job?
No. The JBHC89 is not Buy American compliant and is not ARRA compliant, and country of origin is listed as multiple. On federally funded work with domestic sourcing requirements, you need a domestically produced fastener instead.
3) What size wrench or socket fits the head on a 1/2-13 Metallics hex bolt?
Head width across flats is 0.725 to 0.750 inch, which is a 3/4 inch wrench or socket. That matches the standard hex head dimension for a 1/2 inch bolt, so it works with normal 3/4 inch impact sockets and open-end wrenches already in the truck.
4) Is this hex bolt plated for corrosion resistance, and can I use it outdoors?
The JBHC89 is steel with a zinc finish. Zinc plating handles dry interior and protected exterior work such as strut, channel, panel and equipment mounting. For direct weather exposure, wet locations, or contact with pressure treated lumber, step up to hot dip galvanized or stainless instead, since the plating on a zinc bolt is thin.
5) How many bolts come in a jar of Metallics JBHC89, and is there a minimum order?
Each jar holds 25 bolts, and 25 pieces is the order minimum. The jar packaging keeps the hardware sorted on a service van or a shop shelf rather than loose in a bin. Other sizes and quantities can be requested.
6) Are nuts and washers included with the Metallics JBHC89 hex bolts?
The jar contains hex bolts only, 25 of them. Order 1/2-13 hex nuts and 1/2 inch flat or lock washers separately to complete the connection.
7) Does a 3-1/4 inch long 1/2-13 bolt come fully threaded or with a plain shank?
Published data for the JBHC89 covers the 1/2-13 thread, the 3-1/4 inch length, the 0.482 to 0.515 inch shank diameter and the hex head dimensions. If your connection depends on an unthreaded grip length through the joint, work from the overall 3-1/4 inch length and the thickness of the material you are clamping, and size the nut and washers to the 1/2-13 thread.
8) Is the JBHC89 the same bolt as the BHC equivalent, just packaged differently?
Both sit in the Metallics BHC and JBHC series of hex bolts. The J prefix on JBHC89 indicates the jar pack, 25 pieces per jar. If you want the same 1/2-13 x 3-1/4 bolt in a different count or a different length, those are available on request.
How fast can I get the Metallics JBHC89 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JBHC89 come with a warranty?
Absolutely. The Metallics JBHC89 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JBHC89?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JBHC89 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!