Metallics JBHC51 Bolts 1/4-20 X 2-1/4 Hxbt St-zn (Jar 100)

The JBHC51 is a 1/4-20 hex bolt, 20 threads per inch, coarse UNC thread made to ASME B18.2.1-1996. Any standard 1/4-20 UNC nut or tapped 1/4-20 hole will take it. The measured outside diameter runs 0.237 to 0.260 inch.

The JBHC51 is steel with a zinc plated finish, which is a mild corrosion coating meant for dry interior and protected work, not sustained weather or wet exposure. For rooftop, exterior strut, or washdown areas, step up to hot dip galvanized or stainless hardware instead. Head color is silver to match the plating.

Metallics flags the BHC and JBHC hex bolt line as both Buy American compliant and ARRA compliant. Country of origin is listed as multiple, so if your specification requires documentation on a specific lot, ask for the mill paperwork with the order.

These ship 100 to a jar, and 100 count is the order minimum, so the jar is the smallest unit. The full jar weighs 3.55 lbs. Metallics offers other sizes and quantities in this hex bolt line by request.

The JBHC51 is one size in the Metallics BHC and JBHC hex bolt series, which runs other diameters and lengths in the same zinc plated steel; other sizes and quantities are available by request. The JBHC prefix is the 100 count jar pack, and BHC is the bulk pack of the same bolt, so a facility standardizing on 1/4-20 can hold jars on the van and bulk in the stockroom.