You may also like
Bolts 1/4-20 X 2 Hxbt Br (Jar 100)
Additional Notes
- other sizes and quantities available by request
Manufacturer Resources
Product Specs
- Arra Compliant:
- C
- Buy American Compliant:
- C
- Division:
- Electrical H1
- Fastener Head Color:
- Brass
- Fastener Head Height:
- May-32 in.
- Fastener Head Type:
- Hex
- Fastener Head Width:
- 0.428 - 0.438 in.
- Fastener Height:
- 0.150 - 0.163
- Fastener Length:
- 2
- Fastener Width:
- 0.488 - 0.505
- Language Code:
- EN
- Order Minimum Imperial:
- 100
- Order Minimum Uom Imperial:
- CT
- Outside Diameter:
- 0.2450 - 0.2500 IN
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Product Height:
- 5.75 in
- Product Length:
- 3.5 in
- Product Weight:
- 1379 g
- Product Width:
- 88.9 MM
- Sub Division:
- Electrical-E H2
- Thread Per Inch:
- 20
- Wrenching Height:
- 0.16
- Department:
- Electrical
- Product Subgroup:
- Bolts
- Product Type:
- Hexagonal Bolt
- Type2:
- Hexagonal Bolt
- Series:
- JBRHC
- Product Details:
- Hexagonal Bolt
- Product Material:
- Brass
Metallics JBRHC4 – Frequently Asked Questions
1) Will a 1/4-20 nut or tapped hole accept the Metallics JBRHC4 brass hex bolt?
Yes. The JBRHC4 is a 1/4-20 thread, 20 threads per inch, with a measured outside diameter of 0.2450 to 0.2500 inch. It threads into any standard 1/4-20 UNC nut, strut nut, or tapped hole.
2) Is the JBRHC4 solid brass all the way through, or just brass plated?
Solid brass. The material is brass and the head color is brass, so there is no plating to wear through at the wrench flats. Brass hardware is what electricians reach for on grounding and bonding connections, where dissimilar metal contact and corrosion matter.
3) How much grip length do I get from a 1/4-20 x 2 inch brass hex bolt?
The JBRHC4 is 2 inches long under the head, so with a nut and washers you can clamp stacked material up to roughly that depth. For thinner assemblies the excess thread stands proud of the nut, so order a shorter length if a flush finish matters.
4) How many bolts come in a jar of Metallics JBRHC4, and can I buy fewer?
It ships as a jar of 100, and 100 count is the order minimum, so the jar is the smallest buying unit. Other sizes and quantities are available by request.
5) Does the JBRHC4 brass hex bolt meet Buy American or ARRA requirements on a federal job?
The JBRHC4 is flagged compliant for both Buy American and ARRA in the product record, though the country of origin is listed as China. On a federally funded project, verify the compliance basis your specification requires before you submit it.
6) How tall is the hex head, and will a socket seat on it in a tight space?
Wrenching height on the head is 0.16 inch, with the head height measured in the 0.150 to 0.163 inch range. That is a shallow head, so a deep socket is not needed, but in very tight clearances a thin open-end wrench on the 7/16 flats gives you the most room.
How fast can I get the Metallics JBRHC4 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JBRHC4 come with a warranty?
Absolutely. The Metallics JBRHC4 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JBRHC4?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JBRHC4 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.