Metallics JSBH26D Bolts 3/8-16...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$61.64
$15.43
Metallics JSBH26D Bolts 3/8-16 x 3 HXBT SS (Jar 50)

Metallics JSBH26D Bolts 3/8-16 x 3 HXBT SS (Jar 50)

(No reviews yet) Write a Review

Model: JSBH26D
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$61.64
$15.43
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Bolts 3/8-16 x 3 HXBT SS (Jar 50)

  • Features

    • 18-8 and 316 stainless steel cap screws are both made from austenitic alloy
    • Used in products that require general atmospheric corrosion resistance, such as chemical and food-processing equipment. Some chemical environments may require special corrosion resistant materials and precautions.

  • Additional Notes

    • Other sizes and quantities available by request

Manufacturer Resources

Product Specs

Arra Compliant:
N
Buy American Compliant:
No
Country Of Origin:
United States
Division:
Electrical H1
Fastener Head Height:
15/64 in.
Fastener Head Type:
Hex
Fastener Head Width:
0.551 - 0.562 in.
Fastener Height:
0.226 - 0.243
Fastener Length:
3
Fastener Width:
0.628 - 0.650
Hardness:
Rockwell B95-C32
Language Code:
EN
Order Minimum Imperial:
100
Order Minimum Uom Imperial:
CT
Outside Diameter:
0.3690 - 0.3750 IN
Pack Type:
Jar
Product Group:
Fasteners
Sub Division:
Electrical-E H2
Tensile Strength:
100000 - 150000 psi minimum
Thread Per Inch:
16
Yield Strength:
65000 psi minimum
Department:
Electrical
Product Subgroup:
Bolts
Product Type:
Hexagonal Bolt
Type2:
Hexagonal Bolt
Series:
SBHC and JSBHC
Product Details:
Hexagonal Bolt
Product Material:
18-8 Stainless Steel

Metallics JSBH26D – Frequently Asked Questions

1) Will a 3/8-16 bolt thread into a standard 3/8-16 strut nut or channel nut?
Yes. The JSBH26D is cut 16 threads per inch on a 3/8 inch diameter, which is standard UNC coarse thread for that size, so it mates with any 3/8-16 strut nut, channel nut, or tapped hole. Shank outside diameter runs 0.3690 to 0.3750 inch.
2) Is 18-8 stainless the right bolt for a wet or coastal exterior install?
18-8 is an austenitic stainless that handles general atmospheric corrosion, so it suits damp interiors, chemical and food-processing equipment, and most outdoor work. For saltwater exposure or aggressive chemicals, 316 stainless is the better call, and some chemical environments need special corrosion-resistant materials and precautions.
3) Does the Metallics JSBH26D bolt qualify for Buy American or ARRA funded jobs?
No. The JSBH26D is flagged not Buy American compliant and not ARRA compliant, even though country of origin is listed as the United States. If your project carries a domestic-content clause, treat this as non-qualifying.
4) What wrench or socket size fits the Metallics JSBH26D 3/8 inch hex bolt?
The hex head measures 0.551 to 0.562 inches across the flats, which is a 9/16 inch wrench or socket. Head height is 15/64 inch, so a standard depth socket clears it fine.
5) How strong is the Metallics JSBH26D stainless hex bolt compared with a plated Grade 5?
Tensile runs 100,000 to 150,000 psi minimum with 65,000 psi minimum yield, and hardness is Rockwell B95 to C32. That is below a Grade 5 carbon steel bolt on yield, so where you are replacing plated structural hardware with stainless for corrosion reasons, check the load the connection has to carry.
6) How are these 3/8-16 x 3 stainless hex bolts packaged, and what is the minimum order?
They ship in a jar of 50, model JSBH26D. The imperial order minimum is 100 count, so plan on two jars as the smallest buy. The jar packaging keeps loose bolts contained on a service truck or MRO shelf.
7) What size hole do I drill for a 3/8-16 hex bolt to pass through?
Shank diameter is 0.3690 to 0.3750 inch, so a 13/32 inch hole gives clearance and a 7/16 inch hole gives a looser fit for field alignment. Do not drill 3/8 exact, the thread crest will bind.
How fast can I get the Metallics JSBH26D delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JSBH26D come with a warranty?
Absolutely. The Metallics JSBH26D is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JSBH26D?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Metallics JSBH26D from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!