You may also like
Bolts 5/8-11 X 2 Hxbt St-zn (Jar 50)
Additional Notes
- Other sizes and quantities available by request
Manufacturer Resources
Product Specs
- Arra Compliant:
- C
- Buy American Compliant:
- C
- Division:
- Electrical H1
- Fastener Head Height:
- 27/64 in.
- Fastener Head Type:
- Hex
- Fastener Head Width:
- 0.906 - 0.938 in.
- Fastener Height:
- 0.378 - 0.444
- Fastener Length:
- 2
- Fastener Width:
- 1.033 - 1.083
- Field Application:
- Electrical, Plumbing, Heating and Air Conditioning Industries
- Grade:
- 2
- Language Code:
- EN
- Neurspe:
- https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Hex_Bolt_St-Zn_Galv.pdf
- Order Minimum Imperial:
- 50
- Order Minimum Uom Imperial:
- EA
- Outside Diameter:
- 0.605 - 0.642 IN
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Product Height:
- 7.25 in
- Product Length:
- 4.5 in
- Product Weight:
- 10.94 lbs
- Product Width:
- 4.5 in
- Sub Division:
- Electrical-E H2
- Thread Per Inch:
- 11
- Thread Standard:
- ASME B18.2.1-1996
- Department:
- Electrical
- Product Subgroup:
- Bolts
- Product Type:
- Hexagonal Bolt
- Type2:
- Hexagonal Bolt
- Series:
- BHC and JBHC
- Product Finish:
- Zinc
- Product Details:
- Hexagonal Bolt
- Product Material:
- Steel
Metallics JBHC69 – Frequently Asked Questions
1) What thread does the Metallics JBHC69 hex bolt take, and will it run into a standard 5/8 nut?
It's a 5/8-11 bolt, 11 threads per inch, which is the standard UNC coarse thread for 5/8 inch diameter. Any standard 5/8-11 coarse nut or tapped 5/8-11 hole will take it. Thread form is made to ASME B18.2.1-1996, and the measured shank outside diameter runs 0.605 to 0.642 inches.
2) Is a Grade 2 zinc plated bolt strong enough for hanging electrical and mechanical supports?
These are Grade 2 steel bolts with a zinc finish, which is the common general purpose strength class used for electrical, plumbing, and HVAC support work. If your drawing or structural detail calls out Grade 5 or Grade 8, a Grade 2 bolt does not substitute for it, since Grade 2 carries a lower tensile rating.
3) Do these Metallics hex bolts meet Buy American and ARRA requirements for a government or institutional job?
Metallics lists the BHC and JBHC hex bolts as compliant for both Buy American and ARRA. Country of origin is recorded as multiple, so if your contract requires a specific country of manufacture documented per shipment, confirm that at the order rather than assuming a single source.
4) What size wrench or socket fits the head on the Metallics JBHC69?
Head width across the flats measures 0.906 to 0.938 inches, so a 15/16 inch wrench or socket is the fit. That is the standard across-flats dimension for a 5/8 inch hex bolt.
5) Can I use these zinc plated hex bolts outdoors or in a wet location?
Zinc plating gives indoor and light moisture protection only. Steel with a standard zinc finish will corrode in direct weather, wash down, coastal air, or anywhere chemically aggressive. For sustained exposure go to hot dip galvanized or stainless 5/8-11 hardware instead.
6) How many bolts come in a jar of Metallics JBHC69, and is 50 the minimum I have to buy?
The JBHC69 ships as a jar of 50 pieces, and 50 each is the order minimum. Jar packaging is what makes this format useful on a service truck or a shop shelf where you're pulling a handful at a time rather than opening a bulk box. The filled jar weighs 10.94 lbs.
7) I need the same 5/8-11 hex bolt in a different length or a bigger quantity. Is that possible?
Yes. The Metallics BHC and JBHC hex bolt program covers other sizes and quantities by request, so if 2 inches is short for your stack or a 50 piece jar is the wrong quantity for the job, the same zinc plated steel hex bolt can be sourced in another length or pack.
How fast can I get the Metallics JBHC69 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JBHC69 come with a warranty?
Absolutely. The Metallics JBHC69 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JBHC69?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JBHC69 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.