You may also like
Bolts 5/8-11 X 3 Hxbt SS (Box 50)
Additional Notes
- Other sizes and quantities available by request
Features
- Used in products that require general atmospheric corrosion resistance, such as chemical and food-processing equipment. Some chemical environments may require special corrosion resistant materials and precautions.
- 18-8 and 316 stainless steel cap screws are both made from austenitic alloy
Manufacturer Resources
Product Specs
- Arra Compliant:
- N
- Buy American Compliant:
- No
- Division:
- Electrical H1
- Fastener Head Height:
- 25/64 in.
- Fastener Head Type:
- Hex
- Fastener Head Width:
- 0.922 - 0.938 in.
- Fastener Height:
- 0.378 - 0.403
- Fastener Length:
- 3
- Fastener Width:
- 1.051 - 1.083
- Field Application:
- Electrical, Plumbing, Heating and Air Conditioning Industries
- Hardness:
- Rockwell B95-C32
- Language Code:
- EN
- Neurspe:
- https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Hex_Bolt_Dom_18-8_SS_316_SS.pdf
- Order Minimum Imperial:
- 50
- Order Minimum Uom Imperial:
- EA
- Outside Diameter:
- 0.6170 - 0.6250 IN
- Pack Type:
- Box
- Product Group:
- Bolts
- Product Height:
- 6 in
- Product Length:
- 7.25 in
- Product Weight:
- 7212 g
- Product Width:
- 158.75 MM
- Sub Division:
- Electrical-E H2
- Tensile Strength:
- 100000 - 150000 psi minimum
- Thread Per Inch:
- 11
- Wrenching Height:
- 0.269
- Yield Strength:
- 65000 psi minimum
- Department:
- Fasteners
- Product Subgroup:
- Hex Bolts
- Product Type:
- Hex Bolt
- Type2:
- Hexagonal Bolt
- Series:
- SBHC and JSBHC
- Product Details:
- Hexagonal Bolt
- Product Material:
- 18-8 Stainless Steel
Metallics SBH96 – Frequently Asked Questions
1) Will stainless hex bolts hold up outdoors or in a wash-down area?
The SBH96 is 18-8 stainless steel, which gives general atmospheric corrosion resistance, the reason it gets used on chemical and food-processing equipment. Aggressive chemical exposure is a different problem: in those environments a higher alloy such as 316 stainless and added precautions may be needed instead.
2) Will the Metallics SBH96 meet a Buy American or ARRA requirement on a federal job?
No. The SBH96 is not Buy American compliant and is not ARRA compliant, and country of origin is listed as multiple. If the spec on the job calls for domestic fasteners, this is the wrong part and you need a domestically produced hex bolt instead.
3) How strong is a 5/8-11 18-8 stainless hex bolt compared with a plated Grade 5?
Tensile strength on the SBH96 runs 100,000 to 150,000 psi minimum with a 65,000 psi minimum yield, and hardness is Rockwell B95 to C32. That puts it in the range of a Grade 5 steel bolt on tensile but with a lower yield, so for a high-preload structural connection a Grade 5 or Grade 8 plated bolt is the stronger choice. Stainless is picked here for corrosion resistance, not for maximum clamp load.
4) How many bolts come in a box of Metallics SBH96, and can I buy just a few?
The SBH96 ships as a box of 50 pieces, and 50 each is the order minimum, so it is sold by the full box rather than loose. Other sizes and quantities are available by request.
5) Do the SBH96 bolts come with nuts and washers?
No. The SBH96 is a hex bolt only, 50 to a box. Mating 5/8-11 stainless hex nuts and 5/8 flat or lock washers have to be ordered separately, and matching them in 18-8 stainless keeps the whole connection corrosion resistant and avoids pairing dissimilar metals.
6) How much grip length do I get from a 3 inch 5/8-11 hex bolt?
Length is measured 3 inches under the head on the SBH96, with the 25/64 inch hex head sitting above that. Subtract your material stack plus washer and nut thickness from the 3 inches to confirm you have enough thread engagement; a nut should run out flush or slightly past the bolt end.
How fast can I get the Metallics SBH96 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics SBH96 come with a warranty?
Absolutely. The Metallics SBH96 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics SBH96?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics SBH96 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.