You may also like
Bolts 7/8-9 X 10 Hxbt Galv (Box 25)
Additional Notes
- Other sizes and quantities available by request
Manufacturer Resources
Product Specs
- Arra Compliant:
- C
- Buy American Compliant:
- C
- Division:
- Electrical H1
- Fastener Head Height:
- 37/64 in.
- Fastener Head Type:
- Hex
- Fastener Head Width:
- 1.269 - 1.312 in.
- Fastener Height:
- 0.531 - 0.604
- Fastener Length:
- 10
- Fastener Width:
- 1.447 - 1.516
- Language Code:
- EN
- Order Minimum Imperial:
- 25
- Order Minimum Uom Imperial:
- CT
- Outside Diameter:
- 0.852 - 0.895 IN
- Pack Type:
- Box
- Product Group:
- Fasteners
- Product Height:
- 8 in
- Product Length:
- 7.25 in
- Product Weight:
- 42.46 lbs
- Product Width:
- 8.25 in
- Sub Division:
- Electrical-E H2
- Thread Per Inch:
- 9
- Thread Standard:
- ASME B18.2.1-1996
- Department:
- Electrical
- Product Subgroup:
- Bolts
- Product Type:
- Hexagonal Bolt
- Type2:
- Hexagonal Bolt
- Series:
- BHC and JBHC
- Product Finish:
- Galvanized
- Product Details:
- Hexagonal Bolt
- Product Material:
- Steel
Metallics BHC7810G – Frequently Asked Questions
1) What thread size and pitch are the Metallics BHC7810G hex bolts?
They are 7/8-9, meaning a 7/8 inch nominal diameter with 9 threads per inch, which is the UNC coarse pitch for that diameter. Measured body diameter runs 0.852 to 0.895 inch. Thread form follows ASME B18.2.1-1996, so standard 7/8-9 heavy or finished hex nuts and washers will thread on.
2) Is the BHC7810G bolt galvanized for outdoor or wet locations?
Yes. The BHC7810G is a galvanized steel hex bolt, which is what you want for exterior strut, pole line, tower, and damp-location electrical work rather than plain finish. Pair it with galvanized nuts and washers so you are not mixing coatings at the joint.
3) How many bolts come in a box of Metallics BHC7810G, and can I buy fewer?
They ship as a box of 25, and 25 count is the order minimum, so that is the smallest quantity. A box of 25 of the 7/8 x 10 galvanized bolts weighs 42.46 lbs, which is worth knowing before you carry it up a lift. Other sizes and quantities can be requested.
4) Do these Metallics galvanized hex bolts qualify for a Buy American or ARRA job?
The BHC7810G is flagged Buy American compliant and ARRA compliant in the manufacturer data, with country of origin China. On a federally funded project, verify which clause your spec invokes, since the compliance flag and the origin need to be read together by your submittal reviewer.
5) Is the BHC7810G a hex bolt or a carriage bolt?
It is a hex head bolt, not a carriage or square head. The hex head needs wrench or socket access on one side and a nut on the other, so it is not a one-side-only fastener. Head type is hex per the spec and the thread conforms to ASME B18.2.1-1996 for finished hex bolts.
How fast can I get the Metallics BHC7810G delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics BHC7810G come with a warranty?
Absolutely. The Metallics BHC7810G is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics BHC7810G?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics BHC7810G from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.