You may also like
Bolts 8-32 x 1/2 Hx MS St-zn (Jar 100)
Additional Notes
- Other sizes and quantities available by request
Manufacturer Resources
Product Specs
- Arra Compliant:
- C
- Buy American Compliant:
- C
- Dimensional Standard:
- ASME B18.6.3-2002
- Division:
- Electrical H1
- Drive Type:
- Slotted
- Fastener Head Type:
- Hex
- Fastener Length:
- 2-Jan
- Language Code:
- EN
- Order Minimum Imperial:
- 100
- Order Minimum Uom Imperial:
- CT
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Product Height:
- 2.15 in
- Product Length:
- 3 in
- Product Weight:
- 204 g
- Product Width:
- 76.2 MM
- Sub Division:
- Electrical-E H2
- Thread Per Inch:
- 32
- Thread Standard:
- ANSI/ASME B1.1
- Department:
- Electrical
- Product Subgroup:
- Bolts
- Product Type:
- Hexagonal Bolt
- Type2:
- Hexagonal Bolt
- Series:
- JHHMS
- Product Finish:
- Zinc
- Product Details:
- Hexagonal Bolt
- Product Material:
- Steel
Metallics JHHMS84 – Frequently Asked Questions
1) What thread size are the Metallics JHHMS84 machine screws, and will they take a standard 8-32 nut?
They are 8-32, meaning a #8 diameter with 32 threads per inch, cut to ANSI/ASME B1.1 Unified inch threads. Any standard 8-32 nut or 8-32 tapped hole will accept them, which is the usual thread for ground screws, device mounting and panel hardware.
2) Do the Metallics JHHMS84 screws meet Buy American requirements on a federal job?
The JHHMS84 is flagged Buy American compliant and ARRA compliant, with country of origin China. On a federally funded project confirm which standard your contract cites, because those two flags and the origin need to line up with the specific clause in your spec.
3) Are these zinc plated steel, and can I use them outdoors?
Steel with a zinc finish. Zinc plating handles indoor and dry or damp locations fine, but it is not a stainless or hot dip coating, so for wet exterior or corrosive service you want a stainless or galvanized fastener instead.
4) How many 8-32 x 1/2 screws come in a jar, and is there a minimum order?
They ship in a jar of 100 count, and 100 is the order minimum, so one jar is the smallest buy. Useful format for a van or a shop drawer since the jar keeps the count contained. Larger quantities can be requested.
5) What dimensional standard do these hex machine screws follow?
Head and body dimensions follow ASME B18.6.3-2002, the standard for inch machine screws, with threads to ANSI/ASME B1.1. If a submittal asks for screws to a recognized dimensional standard rather than a generic hardware screw, those are the two to cite.
6) How much does a jar of 100 of these 8-32 screws weigh for a parts bin or kit build?
A full jar runs 204 g. The jar itself measures 3 in by 2.15 in by 76.2 mm, so it drops into a standard van bin or MRO stock shelf without repackaging.
How fast can I get the Metallics JHHMS84 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JHHMS84 come with a warranty?
Absolutely. The Metallics JHHMS84 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JHHMS84?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JHHMS84 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.