You may also like
Bolts M12 x 35 HXBT St-zn (Jar 50)
Additional Notes
- Other sizes and quantities available by request
Manufacturer Resources
Product Specs
- Arra Compliant:
- N
- Buy American Compliant:
- No
- Dimensional Standard:
- DIN 931
- Division:
- Electrical H1
- Fastener Head Type:
- Hex
- Fastener Head Width:
- 18.67 - 19 in.
- Fastener Height:
- 7.32 - 7.68
- Fastener Length:
- 35mm
- Field Application:
- Electrical, Plumbing, Heating and Air Conditioning Industries
- Hardness:
- Rockwell C23-34
- Language Code:
- EN
- Neurspe:
- https://ideadigitalasset.com/DAMRoot/Original/10035/11237_ID-SPE-v1-ID-SPE-v1-Hex_Hd_Metric_Bolt_St-Zn_18-8_SS.pdf
- Order Minimum Imperial:
- 50
- Order Minimum Uom Imperial:
- EA
- Pack Type:
- Jar
- Product Group:
- Fasteners
- Product Height:
- 7.25 in
- Product Length:
- 4.5 in
- Product Weight:
- 2109 g
- Product Width:
- 114.3 MM
- Sub Division:
- Electrical-E H2
- Tensile Strength:
- 120350 psi minimum
- Thread Pitch:
- 1.75
- Yield Strength:
- 95700 psi minimum
- Department:
- Electrical
- Product Subgroup:
- Bolts
- Product Type:
- Hexagonal Bolt
- Type2:
- Hexagonal Bolt
- Series:
- MBHC and JMBHC
- Product Finish:
- Zinc
- Product Details:
- Hexagonal Bolt
- Product Material:
- Steel
Metallics JMBHC1235 – Frequently Asked Questions
1) What thread pitch is on the Metallics JMBHC1235 M12 bolt, and will it take a standard M12 nut?
Thread pitch is 1.75 mm, which is the standard coarse pitch for M12. Any standard M12 coarse nut or tapped M12 hole will take it. If your assembly uses M12 x 1.5 fine thread, this bolt is the wrong one.
2) How strong is this M12 zinc hex bolt? I need to know if it is good for a strut channel hanger run.
Rated at 120,350 psi minimum tensile and 95,700 psi minimum yield, with hardness of Rockwell C23-34. That strength range is consistent with a Class 8.8 metric bolt and is normal duty for electrical, plumbing and HVAC hanging and bracket work, which is the stated field application.
3) Is this M12 x 35 bolt acceptable on a Buy American or ARRA-funded job?
No. The JMBHC1235 is listed as not Buy American compliant and not ARRA compliant, with multiple countries of origin. On a federally funded project with domestic sourcing requirements, you need a domestically produced fastener instead.
4) Will zinc-plated steel hold up outdoors or in a wet mechanical room?
The JMBHC1235 is plain steel with a zinc finish. Zinc plating is a mild corrosion coating meant for dry interior and sheltered work. For continuous moisture, washdown, or exterior exposure, step up to a stainless M12 hex bolt rather than zinc-plated steel.
5) How many bolts come in a jar, and can I buy just a few?
These ship 50 pieces in a jar, and 50 each is the order minimum, so the jar is the smallest buying unit. Other sizes and quantities are available by request.
6) How much grip length do I get out of a 35 mm bolt?
At 35 mm overall under-head length, this size is for thin stackups: think a bracket and channel, or a fixture foot to a backing plate, typically up to roughly an inch of combined material once you leave thread for the nut. For thicker assemblies order a longer length from the MBHC and JMBHC series.
7) What is the exact part number to order for the M12 x 35 zinc hex bolt in a 50-piece jar?
Order Metallics JMBHC1235. The J prefix designates the jar pack within the MBHC and JMBHC hex bolt series.
How fast can I get the Metallics JMBHC1235 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Metallics JMBHC1235 come with a warranty?
Absolutely. The Metallics JMBHC1235 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Metallics JMBHC1235?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Metallics JMBHC1235 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.