You may also like
SharkBite U3008LF Push-Fit Slip Coupling, Copper/CPVC/PEX
Model: SHK-U3008LF
SharkBite U3008LF Push-Fit Slip Coupling, Copper/CPVC/PEXThe SharkBite U3008LF push-fit slip coupling is built for fast, tool-free repairs and rough-in connections behind the wall. It joins copper...
SharkBite
Starting at
$15.19
Boshart 08SVA-05PF02CPN 1/2" Push-Fit Fitting, Copper-to-PEX Adapter
The Boshart 08SVA-05PF02CPN is a 1/2" push-fit rough-in fitting designed to join copper or PEX tubing without soldering, clamping, or crimping tools. Built for behind-the-wall and under-floor plumbing connections, this push-to-connect fitting lets a plumber or contractor make a fast, tool-free joint on the jobsite, reducing labor time on repairs, remodels, and new construction rough-in runs. As with all push-fit fittings, proper tube preparation (clean, deburred, and fully inserted to the depth mark) is essential for a reliable seal.
Key Features
- Trade Size: 1/2" connection size for standard residential and light commercial supply lines.
- Push-Fit Connection: Push-to-connect design allows a solder-free, crimp-free, tool-free joint for faster rough-in installation.
- Tool-Free Installation: Ideal for tight spaces behind walls or under floors where sweating copper or crimping PEX is impractical.
- Copper and PEX Compatible: Designed to accept copper tubing and PEX tubing for flexible rough-in and repair applications.
- Boshart Manufacturing: Supplied by Boshart, a manufacturer of PEX, plumbing fittings, and rough-in supply products.
Technical Specifications
- Refer to manufacturer documentation for complete technical specifications.
Typical Applications
- Residential and Commercial Rough-In Plumbing
- Copper-to-PEX Transitions Behind Walls and Under Floors
- Repair and Retrofit Work Without Soldering
- Renovation and New Construction Supply Line Connections
- Tight-Access Installations Where Torches or Crimp Tools Cannot Reach
Why Boshart?
Boshart supplies plumbers and contractors with rough-in fittings built for dependable, code-focused installations. This push-fit fitting is engineered to simplify copper and PEX connections on the jobsite, helping tradespeople complete rough-in work efficiently without sacrificing a secure mechanical joint.
Manufacturer Resources
Product Specs
- list_batch:
- BOS-20260923
- Product Type:
- Push-Fit Fitting
- Connection Type:
- Push-Fit
- Department:
- Plumbing
- Product Subgroup:
- Fittings and Valves
- Product Size:
- 1/2"
- Product Group:
- Fitting
- Product Weight:
- 0.27 lb
- Product Length:
- 1.05 in
- Product Width:
- 3.35 in
- Product Height:
- 6.05 in
Boshart 08SVA-05PF02CPN – Frequently Asked Questions
1) Will the Boshart 08SVA-05PF02CPN push-fit fitting work on both copper and PEX tubing?
Yes. The Boshart 08SVA-05PF02CPN is built to accept copper tubing and PEX tubing, so it handles a copper-to-PEX transition in one fitting with no solder joint and no crimp ring. It is a 1/2 inch connection, which covers standard residential and light commercial supply runs.
2) Do I need a crimp tool or a torch to install a Boshart push-fit copper-to-PEX adapter?
No tools are required to make the joint. The push-to-connect design seals when the tube is pushed in, so there is no soldering, clamping, or crimping. You still need to prep the tube properly: clean it, deburr the cut end, and push it fully in to the insertion depth mark. That prep is what makes the seal reliable, and skipping the deburr is the usual cause of a weep.
3) Is a push-fit fitting acceptable behind a wall or under a floor, or should I use a soldered joint?
This Boshart fitting is intended for behind-the-wall and under-floor rough-in connections, and it is the practical choice where a torch or a crimp tool physically cannot reach. In an open, accessible run where you already have a torch out, a sweated copper joint is still the cheaper connection. The push-fit earns its place on repairs, remodels, and tight-access work where labour time and fire risk are the real cost.
4) Can I use this Boshart push-fit adapter on a repair without draining and re-piping the whole line?
That is the typical use. Cut out the failed section, prep the ends, and push the fitting on: no solder means you do not have to get the line bone dry, and no crimp ring means you do not need clearance for tool jaws. It is listed for repair and retrofit work without soldering, on both copper and PEX, at 1/2 inch.
How fast can I get the Boshart 08SVA-05PF02CPN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Boshart 08SVA-05PF02CPN come with a warranty?
Absolutely. The Boshart 08SVA-05PF02CPN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Boshart 08SVA-05PF02CPN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Boshart 08SVA-05PF02CPN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.