Boshart 14-PPE1-20-2PK 10" Pleated Polyester Sediment Filter, 20 Micron, 2-Pack

Boshart 14-PPE1-20-2PK 10" Pleated Polyester Sediment Filter, 20 Micron, 2-Pack

The Boshart 14-PPE1-20-2PK is a 10" standard pleated polyester sediment filter cartridge rated at 20 micron, sold as a 2-pack. Built from non-woven polyester filter media pleated around a polypropylene core, this cartridge is designed for water filtration housings in residential, commercial and industrial rough-in applications. The pleated construction increases surface area for greater sediment and dirt holding capacity while maintaining flow rate and reducing initial pressure drop compared to non-pleated media. Manufactured in Taiwan, these cartridges drop into standard 10" filter housings for whole-house or point-of-use sediment filtration ahead of downstream plumbing and fixtures.

Key Features

• Trade Size: 10" standard length cartridge sized for common 10" filter housings used in residential and commercial water service lines.
• Micron Rating: 20 micron rating provides sediment and dirt filtration at the stated maximum efficiency flow rate; cartridges can be used above the listed flow rate but with reduced filtering effectiveness.
• Durable Construction: Non-woven polyester filter media pleated around a polypropylene core adds strength and stability to the cartridge under service pressure.
• Pleated Surface Area: The pleated design increases usable filter surface area, giving greater sediment and dirt holding capacity than flat or string-wound media while helping maintain flow rate and reduce initial pressure drop.
• Cleanable & Reusable: These cartridges can be cleaned and reused in most applications and micron ratings, reducing replacement frequency for the installing contractor or facility.
• Pack Configuration: Sold as a 2-pack, with case packaging of 24 ea for stocking multiple housings or service routes.

Technical Specifications

• Country of Origin: Taiwan
• Micron Rating: 20 Micron
• Filter Length: 10" Standard
• Filter Media: Non-Woven Polyester, Pleated
• Core Material: Polypropylene
• Packaging: 2-Pack (Case Pack: 24 ea)

Typical Applications

• Residential Whole-House Sediment Filtration
• Commercial Water Filtration Housings
• Industrial Process Water Pre-Filtration
• Point-of-Entry Filter Housing Replacement Cartridges
• Rough-In Plumbing Water Service Lines

Why Boshart?

Boshart's pleated polyester sediment filters combine a strength-adding polypropylene core with high-surface-area pleated media to deliver reliable sediment and dirt holding capacity across residential, commercial and industrial applications. Because these cartridges can be cleaned and reused in most applications and micron ratings, plumbers and facility managers can service filter housings without replacing cartridges on every maintenance visit. Sourced from Boshart's Taiwan manufacturing and packaged as a 10" standard 20 micron 2-pack, this cartridge is built for straightforward drop-in replacement in standard filter housings.