Boshart FBR101-2 No-Lead Brass...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$6.07
Image coming soon

Boshart FBR101-2 No-Lead Brass 90° Elbow, 1/8"

(No reviews yet) Write a Review

Model: FBR101-2

In Stock (leaves warehouse same day if ordered before 3pm ET)

$6.07
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Boshart FBR101-2 No-Lead Brass 90° Elbow, 1/8"

The Boshart FBR101-2 is a 1/8" brass 90° elbow built for rough-in plumbing and threaded pipe transitions where a compact directional change is needed. Manufactured from brass and cast as a no-lead fitting, this elbow is designed for professional installers working behind the wall or under the floor on threaded supply and distribution lines. Its 90° configuration allows a clean, code-oriented change of direction in tight spaces, and the small 1/8" trade size makes it well suited to compact fitting runs, gauge connections, and small-bore threaded assemblies. As a no-lead fitting, the FBR101-2 is manufactured to reduce lead content in the wetted surface of the fitting, an important consideration for plumbers specifying potable-water-adjacent components on modern rough-in jobs.

Key Features

  • Trade Size: 1/8" connection size for compact threaded pipe runs and small-bore fitting assemblies.
  • Durable Brass Construction: Solid brass body resists corrosion and stands up to repeated makeup on threaded connections.
  • 90° Elbow Configuration: Provides a clean directional change for threaded pipe routing in confined rough-in spaces.
  • No-Lead Formulation: Manufactured as a no-lead brass fitting for plumbing applications where reduced lead content is required.
  • Threaded Connection: Designed to mate with standard threaded pipe and fittings for a secure, serviceable joint.

Technical Specifications

  • Trade Size: 1/8"
  • Material: Brass
  • Angle: 90°
  • Lead Content: No-Lead
  • Product Type: Elbow Fitting

Typical Applications

  • Residential and Commercial Rough-In Plumbing
  • Threaded Small-Bore Pipe Distribution
  • Gauge and Instrument Connection Fittings
  • Renovation and New Construction Plumbing Assemblies
  • Behind-the-Wall Directional Pipe Routing

Why Boshart?

Boshart's FBR101-2 brass 90° elbow is built from solid brass with a no-lead formulation, giving installers a durable, corrosion-resistant fitting for small-bore threaded plumbing connections. For plumbers and contractors who need a reliable directional fitting for rough-in work, the Boshart FBR101-2 delivers consistent thread engagement and long-term serviceability in a compact 1/8" size.

Manufacturer Resources

Product Specs

list_batch:
BOS-20260923
Product Type:
Elbow
Angle:
90°
Standards:
No-Lead
Department:
Plumbing
Product Subgroup:
Elbows
Product Material:
Brass
Product Size:
1/8"
Product Group:
Plumbing Fittings

Boshart FBR101-2 – Frequently Asked Questions

1) Is the Boshart FBR101-2 elbow safe for potable water lines?
It is a no-lead brass fitting, cast to reduce lead content in the wetted surface, which is what plumbers look for on potable water rough-in work. Boshart lists it as no-lead; beyond that, check your local code for the specific marking your inspector wants to see on the fitting.
2) Is the Boshart FBR101-2 elbow female threaded on both ends, or is one end male?
The FBR101-2 is a brass 1/8 inch 90 degree elbow with threaded connections intended to mate with standard threaded pipe and fittings. It is a straight elbow, not a street fitting, so plan on a nipple or threaded pipe end going into each side. If your run needs a male end to go directly into a female port, you want a street elbow instead.
3) Can I use a 1/8 inch brass 90 elbow for a pressure gauge connection?
Yes, that is one of the jobs this fitting is meant for. The FBR101-2 is called out for gauge and instrument connection fittings, and 1/8 inch NPT is the usual thread on small pressure gauges. The 90 degree turn lets you reorient a gauge face without bending the line.
4) Will brass hold up better than a galvanized 1/8 inch elbow behind the wall?
Solid brass resists corrosion and takes repeated makeup on threaded joints without galling the way steel can, which matters on a fitting you may break loose for service later. That is the reason the FBR101-2 gets specified for behind-the-wall and under-floor rough-in where the joint has to stay serviceable years after the wall closes up.
How fast can I get the Boshart FBR101-2 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Boshart FBR101-2 come with a warranty?
Absolutely. The Boshart FBR101-2 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Boshart FBR101-2?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Boshart FBR101-2 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!