Boshart FIN1401-167 1-1/4" x 3...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$2.07
Boshart FIN1401-167 1-1/4" x 3/4" PVC Reducing Tee

Boshart FIN1401-167 1-1/4" x 3/4" PVC Reducing Tee

(No reviews yet) Write a Review

Model: FIN1401-167

In Stock (leaves warehouse same day if ordered before 3pm ET)

$2.07
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Boshart FIN1401-167 1-1/4" x 3/4" PVC Reducing Tee

The Boshart FIN1401-167 is a 1-1/4" x 3/4" PVC reducing tee designed for rough-in plumbing branch connections where a smaller-diameter run needs to be tapped off a larger main line. Built from PVC, this fitting is intended for behind-the-wall or under-slab installation by a plumber or contractor working a DWV or supply branch layout. The reducing tee configuration lets installers transition from a 1-1/4" main to a 3/4" branch line without stepping down through multiple couplings, saving labor and joints on the job.

Key Features

  • Trade Size: 1-1/4" x 3/4" reducing configuration for branching down to a smaller line size on a single fitting.
  • Durable Construction: Molded PVC body resists corrosion and is well suited to standard plastic pipe solvent-weld or fitting systems commonly used in rough-in plumbing.
  • Tee Configuration: Three-way branch design allows a run and a reduced branch off a single fitting body, cutting down on the number of couplings and elbows needed in a layout.
  • Rough-In Ready: Designed for installation behind walls, under floors, or in slab runs as part of a supply or drain branch assembly.
  • Compact Fitting Profile: A single reducing tee body replaces a straight tee plus a separate reducer bushing, simplifying the parts list on the truck.

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Residential and Commercial Rough-In Plumbing
  • PVC Branch Line Connections
  • New Construction Pipe Runs
  • Renovation and Repipe Projects
  • Behind-the-Wall and Under-Slab Installations

Why Boshart?

Boshart supplies rough-in plumbing fittings built for the demands of daily trade use, and the FIN1401-167 PVC reducing tee is sized to help plumbers and contractors simplify branch connections on the job. Its PVC construction and reducing tee design make it a practical choice for standard rough-in layouts where a dependable, corrosion-resistant fitting is needed behind the wall or under the floor.

Manufacturer Resources

Product Specs

list_batch:
BOS-20260923
Product Type:
Tee
Department:
Plumbing
Product Subgroup:
Tees
Product Material:
PVC
Product Size:
1-1/4" x 3/4"
Product Group:
Plumbing Fittings

Boshart FIN1401-167 – Frequently Asked Questions

1) What sizes does the Boshart FIN1401-167 reducing tee connect?
It's a 1-1/4 inch by 3/4 inch reducing tee, so you can run a 1-1/4 inch main and tap a 3/4 inch branch off it. The reduction is built into the fitting body, so you don't need a separate bushing or a step-down coupling at the branch.
2) Can I use a PVC reducing tee like the Boshart FIN1401-167 behind a wall or under a slab?
Yes. The FIN1401-167 is meant for rough-in work, including behind-the-wall, under-floor, and in-slab branch runs. The PVC body is corrosion resistant, which is why it holds up in buried and concealed locations where you won't be getting back at the joint.
3) Do I need a separate reducer bushing with the Boshart 1-1/4 x 3/4 tee?
No. The reduction is integral to the tee, so one fitting does the job of a straight 1-1/4 inch tee plus a 3/4 inch bushing. Fewer joints to solvent weld and one less part to carry on the truck.
4) Is the Boshart FIN1401-167 for drain lines or supply lines?
Boshart lists it for rough-in branch work on either a DWV or a supply branch layout, in both residential and commercial new construction and repipe jobs. Confirm the pipe schedule and system your drawing calls for matches PVC before you commit the run.
5) What is the manufacturer part number for the Boshart 1-1/4 inch by 3/4 inch PVC reducing tee?
Order it as Boshart FIN1401-167. That's the single model covered, in the 1-1/4 inch run by 3/4 inch branch size.
How fast can I get the Boshart FIN1401-167 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Boshart FIN1401-167 come with a warranty?
Absolutely. The Boshart FIN1401-167 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Boshart FIN1401-167?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Boshart FIN1401-167 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!