Boshart FINXS12010 1" Galvaniz...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$3.25
Image coming soon

Boshart FINXS12010 1" Galvanized Insulated Extra-Long Stud Guard

(No reviews yet) Write a Review

Model: FINXS12010

In Stock (leaves warehouse same day if ordered before 3pm ET)

$3.25
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Boshart FINXS12010 1" Galvanized Insulated Extra-Long Stud Guard

The Boshart FINXS12010 is a 1" galvanized, insulated, extra-long stud guard built to protect pipe and tubing runs where they pass through wall studs, joists, and other framing members in rough-in plumbing installations. Sized for 1" pipe or tubing, this stud guard is designed to shield the line from accidental puncture by drywall screws, nails, and other fasteners driven into the framing after the plumbing rough-in is complete. The galvanized steel body resists corrosion in typical framing environments, while the insulated construction helps reduce noise transmission and minimizes direct metal-to-pipe contact at the penetration point. The extra-long profile gives installers additional coverage along the bore, making it well suited for deeper stud or joist penetrations than a standard-length guard would cover.

Key Features

  • Trade Size: Sized for 1" pipe or tubing runs through framing penetrations.
  • Durable Construction: Galvanized steel body for corrosion resistance in typical rough-in framing applications.
  • Insulated Design: Insulated construction helps reduce vibration and noise transmission at the framing penetration.
  • Extra-Long Profile: Extended length provides added protective coverage for deeper stud or joist bores compared to standard guards.
  • Stud Guard Function: Shields pipe or tubing from puncture by drywall screws, nails, and other fasteners after rough-in.
  • Rough-In Application: Installed behind the wall or floor during the plumbing rough-in stage, before finish work begins.

Technical Specifications

  • Trade Size: 1"
  • Material: Galvanized Steel
  • Configuration: Insulated, Extra-Long
  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Residential and Commercial Rough-In Plumbing
  • Pipe and Tubing Protection at Wall Stud Penetrations
  • Floor Joist and Framing Penetrations
  • Renovation and New Construction Framing Runs
  • Noise and Vibration Reduction at Pipe Penetrations

Why Boshart?

Boshart supplies rough-in plumbing hardware built for the realities of the job site, and the FINXS12010 stud guard reflects that focus with a galvanized, insulated, extra-long design intended to protect 1" pipe and tubing runs through framing. Plumbers and contractors can install it during rough-in to help guard against accidental fastener punctures during later finish work, supporting a more reliable installation behind the wall.

Manufacturer Resources

Product Specs

list_batch:
BOS-20260923
Product Type:
Stud Guard
Configuration:
Insulated, Extra-Long
Department:
Plumbing
Product Subgroup:
Hangers and Supports
Product Material:
Galvanized Steel
Product Size:
1"
Product Group:
Rough-In and Supports

Boshart FINXS12010 – Frequently Asked Questions

1) What size pipe does the Boshart FINXS12010 stud guard fit?
The FINXS12010 is sized for 1 inch pipe or tubing where it passes through wall studs, joists, or other framing members. If your run is a different trade size, you need the matching size guard rather than this one, since the guard has to sit over the line at the bore to shield it.
2) What does an insulated stud guard do that a plain one doesn't?
Insulated construction keeps the metal guard from bearing directly on the pipe at the penetration, which cuts vibration and noise transmission through the framing. On a plain guard the pipe contacts bare steel, so you hear more of the water hammer and flow noise in the wall. Function is otherwise the same: both stop drywall screws and nails from reaching the line.
3) When should I use an extra-long stud guard instead of a standard one?
Use the extra-long version when the bore is deeper than a standard guard covers, for example through doubled studs, a header, or a floor joist where the drilled hole runs well past the face of the framing. The FINXS12010 has an extended profile that gives more coverage along the bore. On a single 2x4 stud a standard-length guard is normally enough.
4) At what stage of the job do I install the Boshart FINXS12010?
It goes on during plumbing rough-in, after the line is run through the drilled framing and before any finish work. Once drywall goes up you can no longer get to the penetration, so the guard has to be placed while the stud bay is open. That is the whole point: it protects the pipe from screws and nails driven later by the drywall and trim crews.
5) Will a galvanized stud guard rust inside a wall?
The body is galvanized steel, which is the standard finish for rough-in framing hardware and resists corrosion in a typical dry wall cavity. It is meant for concealed framing penetrations in residential and commercial rough-in, not for buried or continuously wet exposure.
6) Does the FINXS12010 work on copper, PEX, or CPVC?
Boshart lists it for 1 inch pipe or tubing generally, so the deciding factor is the outside size of the line at the bore, not the material it is made from. Match the 1 inch trade size and the guard covers it.
How fast can I get the Boshart FINXS12010 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Boshart FINXS12010 come with a warranty?
Absolutely. The Boshart FINXS12010 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Boshart FINXS12010?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Boshart FINXS12010 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!