Ives

FB61P TOP AND BOTTOM BOLTS (PAIR), FB61T TOP BOLT ONLYFor use with wood doors only;Constant latching—inactive door remains latched until the active door is opened, releasing the automatic...

962 DECORATIVE FLUSH PULL - RECTANGLEFeatures a finger pocket for ease of pulling;Black painted finger pocket;Packaged with fasteners for wood applications. Concealed 8 X 3/4" OH PH.IVES FLUSH PULLS...

960 DECORATIVE FLUSH PULL - RECTANGLE, NARROWFeatures a finger pocket for ease of pulling;Packaged with fasteners for wood applications. Concealed 6 X 3/4" OH PH.IVES DECORATIVE FLUSH PULLS...

8190HD 90° OFFSET SOLID DOOR PULLAvailable sizes 8", 10", 12", 18";Heavy duty mounting hardware exceeds industry standards;3/8-16 mounting hardware;Specify door thickness. Standard mounting...

224HD FULL MORTISE - DOOR EDGE PROTECTORFor 1 3/4" doors;Door edge protector;Spread bearing design;Non-handed for custom cut lengths;1/16" Door Inset;48" Maximum door width;Beveled or square edge...

157XY FULL SURFACEA patented easy-to-install, heavy duty, full surface continuous hinge;Narrow Frame;Patented center loaded, interlocking bearing design;XY (lateral and vertical) adjustability while...

5BB1WT 5 KNUCKLE, BALL BEARING, WIDE THROW FULL MORTISE HINGERecommended for medium weight doors (<150 lbs);Recommended for medium frequency usage (<400 cycles per day);Made with two ball...

5BB1 SC/BSC 5 KNUCKLE, BALL BEARING, WIDE THROW FULL MORTISE HINGERecommended for medium weight doors (<150 lbs);Recommended for medium frequency usage (<400 cycles per day);Made with two ball...

3CB1HW 3 KNUCKLE, CONCEALED BEARING, HEAVY WEIGHT FULL MORTISE HINGERecommended for heavier weight doors (>150 lbs); Recommended for high frequency usage (400 cycles per day);Made with two heavy...

3PB1 STEEL 3 KNUCKLE, PLAIN BEARING FULL MORTISE HINGERecommended for standard weight doors;Recommended for low frequency usage;Not recommended for use with a door closer;Packed with fasteners for...

64 BASE DOOR STOP Base door stop features deluxe one-piece styling;Easily screws into base;Designed with hexagonal head to accommodate wrench or pliers when installing;White rubber tip;Packaged with...

RB471 OFFSET ROLLER BUMPERRB471 Straight roller bumpers. Ideal for use in situations where doors meet; each other at approximate right angles (back to back); Grey rubber roller; Packed with...

WS45/WS45X AUTOMATIC WALL HOLDER - DRYWALL/WOOD Spring loaded roller rides up the face of the strike, seating itself on the strike, holding the door firmly in the open position.A heavy rubber pad...

WS40 AUTOMATIC WALL HOLDER Holder is mounted on wall and strike is mounted on door;Roller on holder rides up seats itself on strike, with a heavy duty bumper pad deadening the sound and shock;Packed...

WS449/WS445 MANUAL WALL HOLDER - DRYWALL/WOOD OR MASONRYUnit functions as a stop but serves as a hold-open device when hook is manually engaged in strike;Unit requires manual disengagement to release...

WS33 WALL STOPS - DRYWALL/WOODReplaceable rubber bumper with offset shoulder screws into cavity on body to prevent loss or theft;Sloping design discourages vandalism;WS33 is packed with fasteners for...

MANUAL WALL HOLDERS - DRYWALL/WOOD/MASONRYHexagon section on unit aids in fastening unit when expansion shield is used;Replaceable black rubber bumpers feature off-set shoulder and threaded shank...

FS495 WALL STOP & AUTOMATIC HOLDERAutomatic door holders ideal for heavy-traffic situations that require a simple, holdopen device;Recommended installation is holder on door and strike on...

9264 OFFSET LONG DOOR PULL, ROUNDED TIP 1-1/4" Diameter tubular bar Round tip is standard Optional Flat Tip (F) is available. Specify F after model number when ordering. Available in whole 1"...

Ives PR-9266/9266F Long Door Pull Pair, 1-1/4″ Diameter, Back-to-Back Mount Offered in 316 stainless steel, the long pulls exceed industry standards for corrosion resistance in exterior...