You may also like
Bravura Raleigh with Round Trim Privacy Leverset, Grade 2
Model: BVR-BV943-312
Bravura Raleigh with Round Trim Passage Leverset
Experience true luxury with high quality Bravura door hardware. This piece exceeds ANSI rated grade 2 standards on the internal mechanics for long...
Bravura
$168.00
$128.97
Bravura Orlando with Round Trim Privacy Leverset
Experience true luxury with high quality Bravura door hardware. This piece exceeds ANSI rated grade 2 standards on the internal mechanics for long lasting smooth quality you can feel with every use.
Privacy Function: Privacy door hardware features a locking mechanism on the interior for use on bedroom and bathroom doors where locking is needed. The exterior side features a small pin hole to unlock the door hardware from the outside.
Features
- Solid Brass
- Reversible
- Smooth operation
- Grade 2
- Residential
Specifications
- Door Prep
- 2-1/8" deadbolt cross bore
- 2-1/8" cross bore
- 1" edge bore
- 1" x 2-1/4" latch face
- Door Thickness: 1-3/8” ~ 2”, 2-1/4” Extension Kits Available
- Latches
- Backset: 2-3/8” Standard and 2-3/4” Optional
- Faceplate: 1” x 2-1/4” round corner
- Bolt: 1/2” Solid Brass throw
- Backset: 2-3/8” Standard and 2-3/4” Optional
- Strikes: Full lip round corner (9103) and square
Manufacturer Resources
Product Specs
- Subcategory:
- Bored Locksets
- Series:
- Orlando
- Product Group:
- Mechanical Locks
- Product Subgroup:
- Bored Locksets
- Commercial/Residential:
- Residential
- Lock Function:
- Privacy
- Product Type:
- Leversets
- Grade:
- Grade 2
- Product Attribute:
- Cylindrical Locks
- Product Function:
- Privacy/Bed/Bath
- Product Category:
- Mechanical Locks
- Department:
- Door Hardware
Bravura BV333611 – Frequently Asked Questions
1) What backset do I order for the Bravura Orlando privacy lever, 2-3/8 or 2-3/4?
Backset is a required choice on the Orlando, offered in 2-3/8 inch and 2-3/4 inch. Measure from the door edge to the center of the 2-1/8 inch cross bore. Residential interior doors are usually 2-3/8; 2-3/4 shows up on some heavier or commercial-prepped doors. Pick the one that matches the hole already in the door, since the latch is what has to reach the bore.
2) Will the Bravura Orlando drop into the holes already bored in my door?
It uses the standard bored-lock prep: 2-1/8 inch cross bore, 1 inch edge bore, and a 1 inch x 2-1/4 inch latch face. If your existing knob or lever came out of a door with that prep, the Orlando goes back in with no new boring. Round-corner faceplate, so a square-corner mortise pocket in the door edge would need to be squared up or the square strike used on the frame side.
3) Is the Bravura Orlando lever handed, or does one part number work on left and right doors?
Non-issue on this one. The Orlando lever is reversible, so a single unit handles a left-hand or right-hand swing. You set the lever direction at install rather than ordering by hand. That matters if you're stocking spares for a building and don't want two SKUs on the shelf.
4) How does the privacy function on the Bravura Orlando actually unlock from the hallway side?
Interior side has the thumb lock; the outside rose carries a small pin hole. Push a straight pin or emergency key through it and the lock releases. That's the standard bed and bath arrangement, and it's what a property manager needs when a tenant locks a bathroom door behind them. There is no key cylinder on this one, so it is not a lock for an entry or a unit door.
5) Is the Bravura Orlando lever rated for a commercial building or is it a residential lock?
It's classified residential, and the description states it exceeds ANSI Grade 2 on the internal mechanics. That makes it reasonable for apartment bedrooms and baths, single-family, and light hospitality. For a school, hospital, or high-traffic public restroom, step up to a commercial Grade 2 privacy lever like the Hager 2540 with the Withnell lever, or an Arrow MK02-TA privacy lock.
6) Can the Bravura Orlando privacy lever replace a Kwikset privacy knob or lever on a bedroom door?
In most cases yes. Both are bored cylindrical privacy sets on the same 2-1/8 inch cross bore and 1 inch edge bore prep, with 2-3/8 or 2-3/4 backset. A Kwikset 300BRNL Breton privacy lever covers 1-3/8 to 1-3/4 inch doors; the Orlando runs 1-3/8 to 2 inches, so it also handles a thicker slab the Kwikset won't. Reuse the strike if the lip and corner style match, otherwise fit the round corner 9103 or square strike supplied.
7) What is a direct alternative to the Bravura Orlando privacy leverset if I want a knob instead of a lever?
The Arrow MK02-TA is a privacy cylindrical lock with a Tudor knob, non-keyed, and it carries a fire rating. The Bravura Orlando is a Grade 2 privacy leverset with round rose trim. Both serve the same bed and bath privacy function; the choice is lever trim versus knob trim, and the Arrow adds a fire rating for openings where that is required.
8) I need a privacy lever for a bathroom door but the opening is commercial traffic. What should I use instead of a residential privacy set?
The Hager 2540 is a Grade 2 cylindrical lock with the Withnell lever, listed for 1-3/8 inch to 2 inch doors. The Bravura Orlando privacy leverset is a Grade 2 lockset designated residential. For a commercial bathroom or bedroom opening in a hotel or multi-family building, the Hager Withnell line is the commercial-side equivalent in the same Grade 2 tier.
9) What is the closest privacy lever to the Bravura Orlando at a lighter grade?
The Kwikset 300BRNL RDT Breton privacy lever set is a Grade 3 privacy lockset for doors 1-3/8 inch to 1-3/4 inch thick. The Bravura Orlando privacy leverset is Grade 2 and fits 1-3/8 inch to 2 inch doors with 2-1/4 inch extension kits available. Both are privacy function with round rose trim; the Bravura covers thicker doors and sits a grade higher on the ANSI scale.
10) I ordered the Bravura Orlando privacy leverset for a hall closet by mistake. What is the right function for a door that does not lock?
For a hall or closet door that only needs latching, a passage function set is correct. The Accentra 5301LN Augusta is a Grade 2 cylindrical lever lock with passage and closet function, and the Falcon B101 is a Grade 2 cylindrical passage lever with a non-handed design. The Bravura Orlando is privacy function, which adds an interior locking mechanism and an exterior pin hole for emergency release, and belongs on bedroom and bathroom doors instead.
11) Does the Bravura Orlando privacy leverset work on an entry door, or do I need something else?
A privacy set is not keyed, so it will not secure an exterior or office door. The Bravura Orlando privacy leverset locks from the inside only and releases from the outside through a small pin hole. For a keyed entry opening, the Hager 2525 is a Grade 2 commercial cylindrical entry lock with a lever handle for 1-3/8 inch to 2 inch doors, and the Cal-Royal AG00 is a Grade 2 entrance lever with a 6-pin Schlage C keyway, keyed different, on a 2-3/8 inch backset.
12) I need a bathroom lock a patient or resident cannot lock themselves into. Is the Bravura Orlando privacy leverset appropriate?
The Bravura Orlando privacy leverset locks from the inside and releases through an exterior pin hole, which is the standard bedroom and bath arrangement. For behavioral health, detention-adjacent, or utility openings where the room side must not be lockable, an asylum function is used instead: the Dexter C1000 Series is a Grade 1 asylum (F87) cylindrical lock for 1-3/8 inch to 2 inch doors, and the Arrow MK33-BD-CS is a Grade 2 heavy duty asylum cylindrical lock with a ball knob and a conventional cylinder in Schlage C keyway.
13) What strike comes with the Bravura Orlando and will it match my existing frame cutout?
Two strike styles are covered: a full lip round corner strike (9103) and a square strike. If the frame already has a square-cut strike mortise from an older lockset, use the square one and you won't be filing the jamb. Round corner suits a router-prepped wood jamb. The bolt is a 1/2 inch solid brass throw, which is standard latch reach for a bored lock and seats in either strike.
14) I need matching passage and entry levers for the rest of the house. Can I use the Orlando privacy lever on bedrooms only?
The Orlando privacy set is bed and bath only, since it has no cylinder and no free-passage option. Halls and closets need a passage function, and a front door needs a keyed entry. If you want a single family across a whole house from one maker, the Baldwin Estate 5103 comes as privacy, passage, and left or right half dummy on the same 5048 rose, so the trim stays consistent door to door.
15) I have a 2-1/4 inch thick door. Will the Orlando lever work on it?
Not out of the box. The Orlando covers 1-3/8 to 2 inches as supplied, and a 2-1/4 inch door needs the extension kit. Order that alongside the lever rather than assuming the standard spindle and screws will reach.
16) Is a keypad leverset a substitute for the Bravura Orlando privacy leverset on a bathroom door?
They solve different problems. The Bravura Orlando privacy leverset gives an interior thumb lock with an outside pin hole release, which is what a bedroom or bath door needs. A keypad set such as the Delaney LP250 electronic keypad leverlock, Grade 2, or the Lockey 2835 mechanical pushbutton keyless lever for 1-3/16 inch to 2 inch doors controls entry by code from the outside. Code entry is a credential for access control, not the momentary occupancy lock a bath door calls for.
17) What is the decorative-brass equivalent to the Bravura Orlando privacy leverset?
The Baldwin Estate 5103 privacy lever with 5048 rose is a privacy function leverset on a round rose. The Bravura Orlando privacy leverset is a solid brass Grade 2 set with round trim. Both are round-rose privacy levers for bedroom and bath doors; the Baldwin Estate 5103 is part of a suite that also includes matching passage and half dummy versions for hall and closet doors on the same run.
18) What matches the Bravura Orlando privacy leverset on a door that needs no working latch at all?
A dummy trim is the right part for a fixed or inactive leaf. The Callan Bentley is a Grade 2 dummy lever, and the BEST 7KC Series 1DT is a Grade 2 non-keyed single dummy trim cylindrical lever in medium duty. The Bravura Orlando privacy leverset is a working Grade 2 lockset with a latch and an interior privacy lock, so it is not the part for a door that only needs a pull.
19) Which privacy or bath lever handles a 2 inch thick door if the Bravura Orlando range is too narrow?
The Bravura Orlando privacy leverset covers 1-3/8 inch through 2 inch doors, with 2-1/4 inch extension kits available. If a thicker leaf is in play, the Falcon K101 Grade 1 passage cylindrical lock with non-handed levers is listed for 1-3/8 inch to 2-1/4 inch and carries a fire rating, though it is passage function rather than privacy. The Hager 2510 Grade 2 passage lever with the Withnell design also covers 1-3/8 inch to 2 inch.
20) A spec calls for Grade 1 privacy trim on a lever. What replaces a Grade 2 privacy leverset?
The Bravura Orlando privacy leverset is Grade 2. Where the drawing calls for Grade 1 in the same cylindrical bored family, the Design Hardware X75 is a Grade 1 lever lockset with a flat lever for 1-3/4 inch doors, and the Corbin Russwin CL3110 is a Grade 1 vandal resistant cylindrical lever lock for 1-3/4 inch to 2 inch doors with a fire rating. Both are passage function, so confirm the function code on the schedule before substituting.
21) What is the Bravura Orlando lever made of, and will it hold up in a rental unit?
Solid brass construction, with the description noting it exceeds Grade 2 on the internal mechanics. Solid brass rather than plated zinc is what keeps a lever from developing play at the rose after a few thousand cycles, which is the usual failure on a rental bathroom door. It's still a residential-duty lock, so a heavily used common-area restroom is better served by a commercial privacy set.
How fast can I get the Bravura BV333611 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bravura BV333611 come with a warranty?
Absolutely. The Bravura BV333611 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bravura BV333611?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bravura BV333611 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.