IDEAL Industries D65U Breakawa...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$174.00
$146.10

IDEAL Industries D65U Breakaway Streetlight Connector, Dual In-Line Fused, Crimp

(No reviews yet) Write a Review

Model: D65U
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$174.00
$146.10
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
Breakaway Streetlight Connector, Dual In-Line Fused, Crimp
  • Features

    • Spring loaded contacts compensate for thermal expansion to maintain integrity of connection (breakaway models)
    • No special equipment necessary “ requires only a knife, wire stripper, hex tool and crimp tool
    • Safe and easy installation in five minutes or less
    • Safely separates upon impact without breaking wires

Manufacturer Resources

Product Specs

Product Group:
Outlets
Department:
Electrical
Product Subgroup:
Switches & Receptacles

Ideal Industries D65U – Frequently Asked Questions

1) What is the IDEAL D65U breakaway streetlight connector used for?
The D65U is an in-line connector for the pole wiring on a streetlight or roadway luminaire. It carries dual in-line fuses, so each of the two energized conductors is fused right at the connection point, and it is a breakaway design: on vehicle impact the body separates instead of tearing the conductors apart. Terminations are crimp type.
2) Is the D65U a fused connector, or do I still need a separate fuse holder in the pole base?
The fusing is built in. The D65U is a dual in-line fused connector, so it holds the fuses itself, one per line conductor, and you do not have to add a separate in-line fuse holder at the hand hole. You do supply the fuses themselves to suit the luminaire load.
3) Will a breakaway streetlight connector protect the wiring if a pole gets hit?
That is the whole point of the design. On impact the D65U pulls apart at the connector body rather than stretching or severing the pole and feeder conductors, which keeps the damage at the connector and leaves the wiring in the base serviceable. A non-breakaway fused connector will not do that, so specify breakaway for any pole in a roadway or parking lot knockdown zone.
4) What tools do I need to install the D65U streetlight connector?
No specialty tooling. A knife, a wire stripper, a hex tool and a crimp tool cover the whole termination, and IDEAL rates the install at five minutes or less. That matters on a bucket truck where you do not want to stage a press or a heat source at height.
5) Is the IDEAL D65U crimp style or does it use set screws?
Crimp. Conductors are crimped into the connector, which is why a crimp tool is on the required tool list along with a knife, stripper and hex tool. If your crew is standardized on a screw-terminal pole connector, this is a different termination method and a different tool kit.
6) What part number do I order for the IDEAL dual fused breakaway pole connector?
Order it as IDEAL Industries D65U. That is the manufacturer part number for the dual in-line fused, crimp, breakaway streetlight connector, and it is a single configuration, so there are no finish, size, or handing options to specify with it.
7) Why does a breakaway pole connector have spring loaded contacts?
Pole bases swing through a wide temperature range and the conductors and contacts expand and contract with it. The spring loaded contacts in IDEAL's breakaway models take up that movement so the contact pressure stays consistent and the joint does not loosen over seasons. This applies to the breakaway versions, which is what the D65U is.
How fast can I get the Ideal Industries D65U delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Ideal Industries D65U come with a warranty?
Absolutely. The Ideal Industries D65U is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Ideal Industries D65U?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Ideal Industries D65U from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.