Bryant 3001I Series Single-Pol...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$23.57
Bryant 3001I Series Single-Pole AC Switch, 30A 277V Ivory

Bryant 3001I Series Single-Pole AC Switch, 30A 277V Ivory

(No reviews yet) Write a Review

Model: 4801I

In Stock (leaves warehouse same day if ordered before 3pm ET)

$23.57
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Bryant 3001I Series Single-Pole AC Switch, 30A 277V Ivory

The Bryant 3001I Series Single-Pole AC Switch is a commercial-grade wiring device built for reliable control of lighting and equipment circuits in demanding facility environments. Rated 30A at 277V AC, this single-pole switch is engineered to handle higher-current loads than standard 15A or 20A residential devices, making it a practical choice for commercial, institutional, and light-industrial wiring systems. Finished in ivory, the 3001I integrates cleanly with standard wall plates and device layouts, and its single-pole configuration provides simple, dependable on/off control from a single switching location. Electrical contractors specifying wiring devices for higher-amperage lighting or equipment branch circuits can rely on the 3001I Series for consistent, code-compliant switching performance.

Key Features

  • Configuration: Single-pole switching provides straightforward on/off control for a single circuit from one switching location.
  • Amperage Rating: 30A rating allows the switch to handle higher-current lighting and equipment loads than typical 15A or 20A wiring devices, reducing the need for auxiliary switching hardware.
  • Voltage Rating: Rated for 277V AC, matching the line voltage commonly used in commercial and industrial lighting circuits and high-bay fixture wiring.
  • AC Switch Design: Built as an AC-rated switch for dependable, consistent performance switching alternating-current loads in demanding commercial electrical systems.
  • Finish: Ivory color option coordinates with common commercial and light-industrial device plates, offering a clean, neutral appearance across installations.
  • Series Construction: Part of the Bryant 3001I series of single-pole switches engineered for consistent, code-compliant performance across a range of commercial installations.
  • Professional-Grade Application: Sized and rated for use where standard residential-grade switches are undersized, supporting higher-load branch circuits common in commercial buildings.

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • Commercial and Industrial Lighting Circuits
  • Higher-Load Equipment and Fixture Switching
  • General Building and Facility Wiring
  • Renovation and New Construction Projects
  • Single-Location On/Off Control Points
  • Institutional and Light-Industrial Electrical Systems

Why Bryant?

Bryant wiring devices are engineered to deliver dependable, code-compliant performance in commercial and industrial electrical systems where standard residential-grade devices fall short. The 3001I Series single-pole switch combines a robust 30A, 277V AC rating with straightforward single-pole control, giving electrical professionals a durable switching solution for demanding facility, lighting, and equipment circuits. Specifying Bryant wiring devices helps ensure consistent switching performance across commercial installations.

Manufacturer Resources

Bryant Full Line Catalog

Product Specs

Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Switches
Product Type:
Wall Switch
Voltage Rating:
120/277V
Product Color:
Ivory
Product Style:
Single Pole

Bryant 4801I – Frequently Asked Questions

1) Will a Bryant 3001I switch work on a 277V lighting circuit?
Yes. The Bryant 3001I single-pole AC switch is rated 30A at 277V AC, which is the line voltage used on commercial and industrial lighting branch circuits and high-bay fixture wiring. It is a single-pole device, so it gives on/off control from one location only. If you need control from two locations, a single-pole switch will not do it.
2) Which amperage should I order in the Bryant ivory single-pole AC switch, 15, 20 or 30 amp?
Three amperages are offered in ivory: 15 amp as part number 4801I, 20 amp as 4901I, and 30 amp as 3001I. Match the switch to the branch circuit and load. For typical 15A and 20A lighting or receptacle-fed control, the 4801I or 4901I are the right pick; the 3001I 30A is for higher-current lighting and equipment loads where a standard 15A or 20A device is undersized.
3) What is the closest ivory commercial toggle switch alternative to the Bryant 3001I series?
For a like-for-like ivory toggle, the Pass & Seymour CS15AC3I is a commercial specification grade switch in ivory. Note the difference in switching capacity: the Bryant 3001I is a single-pole AC switch rated 30A at 277V, so if the branch circuit needs the 30A rating, stay with the Bryant. Where the load is lighter, the Bryant series also covers 15A with the 4801I and 20A with the 4901I, both ivory.
4) I need a white switch instead of ivory - what should I order?
The Bryant 3001I series is finished in ivory. For a white device in a comparable commercial toggle, the Pass and Seymour CS15AC3W is a specification grade toggle switch in white. If the job calls for a decorator paddle rather than a toggle, the Pass and Seymour 2623W is a specification grade 3-way decorator paddle rated 20A at 120V/277V in white.
5) The opening needs three-way switching, not single pole - what do I use?
The Bryant 3001I is a single-pole switch, giving on/off control from one location only. For two switching locations on the same 277V lighting circuit, the Pass and Seymour 2623W is a 3-way decorator paddle switch rated 20A at 120V/277V. Confirm the 20A rating covers the load, since it is below the 3001I's 30A capacity.
6) Can I use a 30A switch like the Bryant 3001I instead of adding a lighting contactor?
That is the reason the 30A rating exists on this device. The 3001I is built to switch higher-current lighting and equipment loads directly, which reduces the need for auxiliary switching hardware on the circuit. It is still a single-pole manual switch, so anything needing remote, timed, or multi-point control still calls for a contactor or relay.
7) Will the ivory Bryant toggle switch match my existing wall plates?
Yes for standard device layouts. The 3001I is finished in ivory and mounts behind standard wall plates, so it lines up with the common commercial and light-industrial device plates already in most buildings. All three amperages (4801I, 4901I, 3001I) are ivory, so a facility can standardize the color across 15A, 20A and 30A openings.
8) Is a Bryant 3001I suitable for a DC circuit or high fault-current application?
No. The 3001I is built as an AC switch and rated for alternating-current loads at 277V. For DC switching, the Bussmann TPHCS-250 is a TPH Series high-current switch rated 80 Vdc with 100kA SCCR, which is a different class of device entirely and not a wall-box wiring device.
9) Is a TradeMaster switch an acceptable substitute for the Bryant 3001I?
Not for the same duty. The Pass and Seymour TM TradeMaster is a 15A decorator switch, while the Bryant 3001I is rated 30A at 277V for higher-current commercial lighting and equipment branch circuits. If you are matching a 15A circuit and want a decorator paddle, the TradeMaster fits; if you are matching the 3001I's 30A load, it does not. The Bryant 4801I covers 15A in the same ivory toggle style.
10) Can I use a Bussmann TPHCS-250 in place of the Bryant 3001I?
No - they solve different problems despite both being called switches. The Bussmann TPHCS-250 is a TPH series high-current switch rated 80 Vdc with a 100kA SCCR, a DC power-distribution device. The Bryant 3001I is a wall-mounted single-pole AC switch rated 30A at 277V that mounts in a standard device box behind a wall plate for lighting and equipment control. Do not cross one for the other.
11) We standardize on Pass and Seymour spec grade - what is the Bryant equivalent for a 15A ivory toggle?
The Bryant 4801I is the 15A single-pole ivory member of the same 3001I switch family, using the same ivory finish and standard wall plate footprint. The comparable Pass and Seymour device is the CS15AC3I commercial specification grade switch in ivory, with the CS15AC3W as the white version of the same toggle. Either keeps an existing ivory device layout consistent.
How fast can I get the Bryant 4801I delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bryant 4801I come with a warranty?
Absolutely. The Bryant 4801I is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bryant 4801I?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Bryant 4801I from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!