You may also like
Bryant 9754NS Nylon NEMA 1-15P Plug
The Bryant 9754NS is a nylon-bodied electrical plug built to the NEMA 1-15P configuration, a standard 2-wire, non-grounding, straight-blade pattern rated 15A, 125V. Its molded nylon construction provides a durable, non-metallic alternative to standard vinyl plug housings for cord sets, extension cords, and replacement cord-cap applications. The 9754NS mates with NEMA 1-15R receptacles for a dependable, code-recognized connection, making it a practical choice when an existing cord cap has cracked, worn out, or needs to be replaced in the field. Electricians, maintenance technicians, and facility teams rely on Bryant plugs like the 9754NS for straightforward, code-compliant cord repairs and new cord assembly work.
Key Features
- Durable Construction: Molded nylon housing offers added durability and impact resistance over standard vinyl plug bodies for everyday cord and extension-cord applications.
- NEMA 1-15P Configuration: Standard 2-wire, non-grounding, straight-blade pattern that mates reliably with NEMA 1-15R receptacles and outlets.
- Electrical Rating: Rated 15A, 125V for typical light-duty cord, extension, and small-appliance circuits.
- Nylon Material: Non-metallic body resists the cracking, chipping, and wear common to lower-grade thermoplastic plug housings.
- Lightweight Design: Nylon construction keeps the plug lightweight without sacrificing the strength needed for repeated plug-in and removal cycles.
- Wide Compatibility: Straight-blade NEMA 1-15P configuration works with the standard 15A duplex receptacles found in most residential and commercial buildings.
- Bryant Quality: Manufactured by Bryant for consistent, code-recognized performance in everyday residential and commercial wiring applications.
Technical Specifications
- Refer to manufacturer documentation for complete technical specifications.
Typical Applications
- Replacement Plug for Extension and Appliance Cords
- Light-Duty Residential and Commercial Cord Sets
- Non-Grounding 15A, 125V Circuit Applications
- Workshop, Garage, and Shop Power Cord Assemblies
- Small Appliance and Portable Tool Cord Replacement
- General Maintenance, Repair, and New Cord Assembly Work
Why Bryant?
Bryant manufactures the 9754NS with a durable nylon housing and the standard NEMA 1-15P configuration, giving contractors, electricians, and facility teams a dependable, code-recognized plug for everyday wiring needs. The non-metallic construction stands up to routine handling in workshops, job sites, and commercial buildings, while the standard straight-blade configuration keeps installation and replacement work quick and straightforward. It is a practical, reliable choice backed by Bryant electrical construction quality for professionals and DIY users alike.
Manufacturer Resources
Bryant Wiring Devices Selection Guide
Product Specs
- list_batch:
- BRY-20260909
- Product Type:
- Straight Blade Plug
- Configuration:
- NEMA 1-15P
- Amperage Rating:
- 15A
- Voltage Rating:
- 125V
- Department:
- Electrical
- Product Group:
- Wiring Devices
- Product Subgroup:
- Plugs & Connectors
- Product Material:
- Nylon
Bryant 9754NS – Frequently Asked Questions
1) What outlets will a NEMA 1-15P plug fit into?
It mates with NEMA 1-15R receptacles and also plugs into the standard 15A 125V duplex outlets found throughout residential and commercial buildings, since a grounded 5-15R accepts the two flat blades of a 1-15P. What it will not do is give the cord a ground path.
2) Is this plug heavy duty enough for industrial or hospital use?
The 9754NS is built for light-duty cord, extension, and small-appliance circuits, not specification-grade service. Where a facility spec calls for industrial grade, the Eaton Arrow Hart AH5266 Ultra Grip is an industrial specification grade 15A 125V straight blade plug. For patient-care areas needing hospital grade and tamper resistance, the Leviton 8215-CAT is hospital grade.
3) Can I replace a cracked extension cord plug with the Bryant 9754NS?
That is its main use. It is a field-wired cord cap for replacing a plug that has cracked or worn out on an extension cord, appliance cord, or portable tool cord, and for building new cord sets. The one condition: the existing cord must be 2-wire non-grounding, because the 1-15P pattern has no ground blade.
4) What is the closest alternative to the Bryant 9754NS if the cord needs a grounding plug?
The Bryant 9754NS is a NEMA 1-15P configuration, which is 2-wire non-grounding, so it has no ground pin. When the cord set requires a grounding blade pattern, the Leviton 8215-CAT is a NEMA 5-15P plug, the 3-wire grounding version of the same 15A straight-blade family; it is a tamper-resistant hospital-grade plug supplied in packs of 100. For a 20A grounding cord cap, the Leviton 8315-CT is NEMA 5-20P, also tamper-resistant hospital grade in packs of 100.
5) Is nylon better than vinyl for a replacement cord cap?
The 9754NS uses a molded nylon body rather than vinyl. Nylon resists the cracking and chipping that lower-grade thermoplastic housings pick up from repeated plug-in and pull-out cycles, and it stays light. For shop, garage, and jobsite cords that get yanked out by the cord, that is the practical difference.
6) What looks like a substitute for the Bryant 9754NS but will not fit a standard 15A outlet?
Two straight-blade plugs are easy to mistake for it. The Leviton 275-E is a commercial grade 4-wire 3-pole straight-blade angle plug, intended for multi-pole circuits rather than a 2-wire cord. The Leviton 5666-C is a 3-wire 2-pole polarized industrial grade plug for 250-volt single-phase service. The Bryant 9754NS is a 2-wire non-grounding NEMA 1-15P pattern at 15A, 125V, and only a NEMA 1-15R or standard 15A duplex receptacle accepts it.
7) How does the Pass & Seymour MaxGrip M3 compare to the Bryant 9754NS as a nylon cord plug?
Both are nylon-bodied cord plugs. The Bryant 9754NS is a NEMA 1-15P 2-wire non-grounding plug rated 15A, 125V. The Pass & Seymour PS5965Y is a MaxGrip M3 series nylon cord plug supplied in yellow, so it is the choice when a high-visibility body is wanted on a shop or jobsite cord.
8) What part number do I quote for the Bryant nylon 15 amp non-grounding plug?
Bryant 9754NS. That is the manufacturer part number, and it covers the nylon-bodied NEMA 1-15P plug rated 15A, 125V.
9) Is there an angled plug alternative to the Bryant 9754NS for cords behind furniture?
The Bryant 9754NS is a straight-blade cord plug in a nylon body. If the cord needs to exit at an angle so the plug sits close to the wall, the Pass & Seymour PS5366-SSAN EHU series is an angled straight-blade plug rated 20A, 125V, and the Leviton 275-E is a commercial grade straight-blade angle plug in a 4-wire 3-pole configuration.
How fast can I get the Bryant 9754NS delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bryant 9754NS come with a warranty?
Absolutely. The Bryant 9754NS is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bryant 9754NS?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bryant 9754NS from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.