You may also like
Bryant HUBP1 1-Gang Toggle Switch Wallplate
The Bryant HUBP1 1-Gang Toggle Switch Wallplate is a single-gang cover designed to provide a clean, properly fitted finish over a standard toggle-style switch opening. Sized to the common single-gang toggle switch pattern used across residential, commercial, and light industrial wiring systems, this wallplate gives installers a straightforward, reliable finishing piece for switch locations in new construction, remodels, and switch-plate replacements. The HUBP1 family is available in Gray, Ivory, and White finishes, letting electricians and facility teams match a wide range of interior color schemes and commercial finish palettes with one dependable single-gang toggle cover. No special tools or hardware modifications are needed to achieve a secure, properly seated fit over a single toggle device box.
Key Features
- 1-Gang Configuration: Sized for a single toggle switch opening, providing straightforward coverage for one device location.
- Toggle-Style Cutout: Shaped specifically for standard toggle switches, ensuring the cover seats securely and cleanly over the device.
- Color Options: Available in Gray, Ivory, and White finishes to coordinate with common residential and commercial wall and device finishes.
- Simple Installation: Mounts directly to existing single-gang toggle switch wallboxes using standard mounting screws, with no special tools required.
- Consistent Fit: Standard single-gang dimensions align with common toggle switch boxes for a secure, gap-free finished appearance.
- Replacement-Ready: A practical option for swapping out damaged, mismatched, or outdated single-gang toggle wallplates during renovation or maintenance work.
Technical Specifications
- Refer to manufacturer documentation for complete technical specifications.
Typical Applications
- Residential Switch Installations
- Commercial and Office Electrical Systems
- New Construction Wiring Projects
- Renovation and Switch-Plate Replacement
- Single-Gang Toggle Switch Locations
- Facility Maintenance and Repair Work
Why Bryant?
Bryant is a well-established name in electrical wiring devices, and the HUBP1 wallplate family reflects that standard with a precise single-gang toggle fit across its Gray, Ivory, and White finish options. Choosing a Bryant wallplate helps ensure a properly sized, secure cover for toggle switch installations across residential, commercial, and light industrial applications, giving electricians and facility teams a dependable finishing component they can install with confidence.
Manufacturer Resources
Bryant Full Line Catalog
Product Specs
- Product Type:
- Toggle Wallplate
- Configuration:
- Single Gang
- list_batch:
- TOPAZ-20260727
- Department:
- Electrical
- Product Group:
- Wiring Devices
- Product Subgroup:
- Wallplates
Bryant P1I – Frequently Asked Questions
1) What part number do I order for a white Bryant HUBP1 toggle wallplate?
White is P1W. The gray plate is P1GY and ivory is P1I. Those are the three colors the HUBP1 toggle plate is made in, so pick the code that matches the switches already on the wall.
2) I need to cover a two-gang box with a switch and a receptacle, not a single toggle. What should I use instead of the Bryant HUBP1?
The Bryant HUBP1 is a single-gang toggle cover and will not span two devices. For a two-device opening, use a two-gang combination plate such as the Pass & Seymour TP126-LA Trademaster nylon combination wallplate, or the Mulberry 76432 in the 764 series or Mulberry 76532 in the 765 series, both cold rolled steel two-gang combination plates in white.
3) What is the closest equivalent to the Bryant HUBP1 toggle wallplate from another brand?
The Pass & Seymour SPJ series is the nearest match in function: it is a thermoset wall plate with a toggle switch opening, the same single toggle device cutout the Bryant HUBP1 covers. The difference is size class - the SPJ is a junior-jumbo plate, so it is oversized relative to a standard single-gang plate and covers more wall around the box, which helps when the drywall cut is ragged or paint lines do not match. The Bryant HUBP1 is a standard single-gang toggle plate and comes in Gray, Ivory, and White.
4) Can I standardize one toggle plate across a whole building in a single color?
Yes, and that's the usual reason to spec the HUBP1 family. One toggle plate in gray, ivory, or white covers most interior palettes, so a facility team can buy a single part number per color instead of matching odd plates room by room. Suitable for residential, commercial, and light industrial switch locations.
5) The devices on the job are decorator rocker style, not toggle. Can I still order the Bryant HUBP1?
No - the Bryant HUBP1 cutout is shaped specifically for standard toggle switches, so a decorator rocker device will not seat in it. For decorator openings, look to a decorator-style plate such as the Eaton 7729V-SP decorator cover, which is a triple-gang configuration.
6) What do I use where a switch was removed and the box is being abandoned in place, rather than a Bryant HUBP1?
A toggle plate like the Bryant HUBP1 needs a device in the box to look right, since the cutout is shaped for a standard toggle switch. Where the device is gone and the box stays, use a blank plate instead - the Pass & Seymour WPB series blank wallplate is offered in brushed aluminum and covers the opening with no cutout.
7) Is the Mulberry 41020 a substitute for the Bryant HUBP1 single-gang toggle plate?
Mechanically it takes the same single toggle opening - the Mulberry 41020 is a 1-gang toggle switch plate in the 4102 series - but it is a gas burner plate in red, meant to identify a gas appliance shutoff switch. If you want a plain finishing cover that blends with the wall, the Bryant HUBP1 in Gray, Ivory, or White is the one to order; reserve the red 41020 for the labeled gas burner location.
8) Can a Bryant HUBP1 cover a phone or data jack location?
No. The Bryant HUBP1 is cut for a single toggle switch and has no jack opening. For voice or data, use a plate built for it - the Eaton 35324W carries a 4-conductor data/voice modular jack in the Type 625B4 pattern, and the Eaton 3533-4W is a white thermoplastic surface mount telephone jack wallplate for RJ11/RJ14.
9) What do I need besides the plate to replace an old toggle switch cover?
Just a screwdriver in most cases. The HUBP1 mounts to the existing single-gang toggle wallbox with standard mounting screws, and no hardware modification is required. If your old plate's screws are damaged or painted over, have replacement device screws on hand.
10) For a three-gang run of receptacles, what replaces the Bryant HUBP1?
The Bryant HUBP1 covers one device location only. For three openings, the Mulberry 76103 is a steel Princess size 3-gang wallplate cut for three duplex receptacles in white, and the Eaton 7729V-SP is a triple-gang decorator cover.
11) How does a thermoset combination plate like the Cooper 2138WBOX differ from the Bryant HUBP1?
The Cooper Wiring Devices 2138WBOX is a 21 Series thermoset combination wallplate in white, meaning its openings are cut for a mix of device types rather than a single toggle. The Bryant HUBP1 is a single-gang toggle cover with one toggle cutout, offered in Gray, Ivory, and White. Choose by what is in the box: one toggle switch points to the HUBP1, a mixed device opening points to the combination plate.
How fast can I get the Bryant P1I delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bryant P1I come with a warranty?
Absolutely. The Bryant P1I is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bryant P1I?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bryant P1I from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.