Bryant Strain Relief Cord Grip...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$26.71
Bryant Strain Relief Cord Grip Connector Series

Bryant Strain Relief Cord Grip Connector Series

(No reviews yet) Write a Review

Model: BDSR24

In Stock (leaves warehouse same day if ordered before 3pm ET)

$26.71
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
"

Bryant Strain Relief Cord Grip Connector Series

The Bryant Strain Relief Cord Grip Connector series is a family of cord grip fittings built to secure cable and cord jackets at the point where they enter an electrical enclosure, panel, junction box, or piece of equipment. This product line is available across six models – BDSR24, BDSR97, DC1752, DC231212, DC2623, and DC6234 – giving contractors and facility teams a range of cord grip options to match different cable entry openings and equipment configurations. Each connector in the family mechanically clamps around the outer jacket of the cable to relieve pulling tension right at the entry point, helping guard against pull-out, abrasion, and stress on the conductors and terminations inside. These are compact, purpose-built components intended for professional electrical, industrial, and commercial wiring work where a dependable strain-relief connection is needed at a cable entry, keeping the connection tight and protected through the life of the installation.

Key Features

  • Model Selection: Choose from BDSR24, BDSR97, DC1752, DC231212, DC2623, or DC6234 to match the specific opening size and cable diameter required for your installation.
  • Strain Relief Function: Clamps securely around the cable or cord jacket to relieve pulling tension right at the point of entry, so the load is carried by the grip rather than the internal wiring.
  • Cord Grip Design: Helps prevent cable pull-out, jacket abrasion, and stress damage to conductors and terminations behind the entry point.
  • Secure Cable Pass-Through: Creates a controlled, mechanically sound entry point for cable or cord routed into an enclosure or fitting.
  • Simple Installation: Designed for straightforward field installation on new or existing enclosures across the model range.
  • Compact, Low-Profile Fitting: Sized to fit into standard enclosure openings without adding excessive bulk around the cable entry.
  • Bryant Model Designations: Each connector is identified by its own Bryant part designation (BDSR24, BDSR97, DC1752, DC231212, DC2623, DC6234) for clear specification, ordering, and replacement.

Technical Specifications

  • Product Type: Strain Relief Grip
  • Product Subgroup: Cord Grips
  • Refer to manufacturer documentation for complete technical specifications by model.

Typical Applications

  • Cable and Cord Entry into Electrical Enclosures
  • Panelboard and Junction Box Wiring
  • Industrial and Commercial Equipment Connections
  • Motor and Control Panel Cable Management
  • Renovation and New Construction Electrical Installations

Why Bryant?

Bryant is a long-established name in electrical wiring devices and connection hardware, supplying components that electricians and contractors rely on for dependable, code-conscious installations. The Strain Relief Cord Grip Connector series reflects that same practical focus: purpose-built fittings sized to do one job well, keeping cable and cord secure, strain-relieved, and protected where it enters an enclosure or piece of equipment. For contractors and facility teams standardizing on Bryant components, this series offers a straightforward range of parts to specify, stock, and install wherever a cord grip connection is called for, from the compact BDSR24 up through the DC6234.

"

Product Specs

Product Type:
Straight Cord Connector
Department:
Electrical
Product Group:
Wiring Devices
Product Subgroup:
Cord Grips
list_batch:
BRY-20260909
Product Size:
1/2"

Bryant BDSR24 – Frequently Asked Questions

1) Which Bryant cord grip model should I order?
Six models are offered: BDSR24, BDSR97, DC1752, DC231212, DC2623, and DC6234. They are all 1/2 inch fittings, so the choice comes down to matching the cable or cord diameter and the equipment configuration you are wiring. Order by the Bryant designation, since each model is identified by its own part number for specification and replacement.
2) What does a strain relief cord grip actually do for a cord drop or flexible cable feed?
It clamps mechanically around the outer jacket of the cable at the entry point, so any pull on the cord is carried by the grip and not by the conductors or the terminations inside the box. That is what protects against pull-out, jacket abrasion at the metal edge of the knockout, and stress damage on the screws or lugs behind the panel. On a pendant cord, a machine feed, or a portable equipment connection, that is the difference between a connection that stays tight and one that loosens over time.
3) Can I add a Bryant cord grip to an enclosure that is already installed?
Yes. These fittings are meant for field installation on new or existing enclosures, so retrofitting an existing panel or junction box that already has a 1/2 inch opening is a normal use. They are low-profile fittings sized for standard openings, so they don't add much bulk around the cable entry in a crowded gutter.
4) Is a cord grip the right choice, or should I use a cable connector or a support grip?
A cord grip like the BDSR or DC series is what you want where flexible cord or cable enters a box and the cord may be tugged: it seals the opening around the jacket and takes the tension. A plain cable connector just terminates the cable mechanically without the same clamping strain relief on a flexible jacket. Where the cord runs vertically and the whole weight of a long drop has to be carried along the cable rather than at one fitting, a woven support grip is the correct product instead. Bryant covers both cord grips and support grips in its cord and support grips line.
5) Are these Bryant grips suitable for industrial motor and control panel cable entries?
That is one of the intended applications. The series is specified for cable and cord entry into electrical enclosures, panelboard and junction box wiring, industrial and commercial equipment connections, and motor and control panel cable management. All models are 1/2 inch, so confirm the control panel gland plate is punched to 1/2 inch.
6) I stock Bryant devices across a facility. Can I standardize on one cord grip part number?
Partly. All six (BDSR24, BDSR97, DC1752, DC231212, DC2623, DC6234) are 1/2 inch fittings, so the enclosure side is consistent and you can punch to one trade size across the plant. What varies between models is the cable side, so a facility carrying several cord diameters will still want more than one part number on the shelf. Each grip carries its own Bryant designation for reorder and replacement.
How fast can I get the Bryant BDSR24 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bryant BDSR24 come with a warranty?
Absolutely. The Bryant BDSR24 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bryant BDSR24?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Bryant BDSR24 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!