Burndy FINGRIP Vinyl-Insulated...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$8.00
Burndy FINGRIP Vinyl-Insulated Female Quick Disconnect Terminal

Burndy FINGRIP Vinyl-Insulated Female Quick Disconnect Terminal

(No reviews yet) Write a Review

Model: QP10F25X03BG25

In Stock (leaves warehouse same day if ordered before 3pm ET)

$8.00
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Burndy QP10F25X03BG25 FINGRIP Vinyl-Insulated Female Quick Disconnect Terminal

The Burndy QP10F25X03BG25 is a FINGRIP vinyl-insulated female quick disconnect terminal engineered for 12-10 AWG conductors, matching a .25 x .03 male tab for a secure, repeatable connection. Built with a brass barrel and a butted seam construction, this terminal delivers dependable conductivity and mechanical strength for demanding electrical wiring tasks. The vinyl insulation sleeve protects the connection point from abrasion and accidental contact, making it a practical choice for panel wiring, control circuits, and general-purpose electrical terminations where fast connect-and-disconnect service is required. As part of Burndy's FINGRIP family of disconnect connectors, it is designed to pair with a corresponding .25 x .03 male tab for tool-free mating and separation during installation, service, and troubleshooting.

Key Features

  • Conductor Range: Sized for 12-10 AWG wire (also listed as 12 AWG-10 AWG) for accurate, secure crimp connections.
  • Brass Construction: Brass terminal body for strong conductivity and long-term durability in wiring and control applications.
  • Vinyl Insulation: Vinyl-insulated sleeve shields the connection point from abrasion, moisture, and incidental contact.
  • Female Quick Disconnect: Female disconnect design mates with a .25 x .03 male tab for fast, tool-free connect and disconnect service.
  • Butted Seam Barrel: Butted seam barrel construction provides a consistent, uniform crimp surface for a reliable termination.
  • Disconnect Connector Category: Classified within Burndy's disconnect connectors product line for terminal and wire-end applications.
  • FINGRIP™ Trade Name: Part of Burndy's recognized FINGRIP line of quick-disconnect terminals.

Technical Specifications

  • Conductor Range: 12-10AWG
  • Product Details: Disconnect Connectors
  • Product Material: Brass
  • Conductor - Copper Str Size Range: 12 AWG-10 AWG
  • Product Type: Terminal
  • Trade Name: FINGRIP™

Typical Applications

  • Electrical Panel and Control Wiring
  • Terminal Block and Junction Box Connections
  • Industrial and Commercial Wiring Applications
  • Quick-Connect Wire Terminations
  • Maintenance, Repair, and Retrofit Electrical Work

Why Burndy?

Burndy's FINGRIP vinyl female quick disconnect terminals combine a brass barrel with a butted seam crimp and protective vinyl insulation for dependable, code-compliant performance on 12-10 AWG conductors. This construction is built for electricians and technicians who need a secure, repeatable connection for professional electrical wiring, panel work, and equipment terminations. Choosing a Burndy FINGRIP terminal means specifying a disconnect connector engineered for consistent crimp quality and durable, long-term service in the field.

Manufacturer Resources

Product Specs

Insulation Type:
Vinyl
Product Type:
Terminal
Product Material:
Brass
Product Details:
Disconnect Connectors
Trade Name:
FINGRIP™
Connector Type:
Female Quick Disconnect
list_batch:
BURNDY-20260915
Department:
Electrical
Product Subgroup:
Lugs & Terminals
Product Group:
Wire Connectors & Terminals

Burndy QP10F25X03BG25 – Frequently Asked Questions

1) What wire sizes do the Burndy FINGRIP female quick disconnect terminals cover?
Two conductor ranges are offered: 12-10 AWG (MPN QP10F25X03BG25) and 22-18 AWG (MPN QP18F25X03BG25). Pick the one that matches the stranded copper conductor you're terminating, since the barrel is sized for a proper crimp on that range only. There is no intermediate 16-14 AWG size in this pairing, so if you're wiring 16 or 14 AWG you need a different terminal.
2) Will a 1/4 inch quick disconnect terminal work on a 0.187 inch tab?
No. The FINGRIP female disconnect is built for a .25 x .03 tab. A 0.187 inch (3/16) tab is a different blade width and the receptacle will not grip it properly. Confirm the blade size on the device before choosing between tab sizes.
3) Is the terminal body brass or steel, and does that matter for panel wiring?
The barrel is brass, with a butted seam construction. Brass gives good conductivity for copper conductor terminations and holds up mechanically to repeated connect and disconnect cycles, which is why these get used in control panels and junction boxes where circuits are opened for troubleshooting.
4) Do I need a special crimper for these Burndy FINGRIP disconnects?
These are crimp terminals, not screw or solder connections, so they require a crimp tool matched to insulated terminals in the AWG range you're using. The butted seam barrel gives a uniform crimp surface, but the crimp die still has to match the conductor range, 12-10 AWG or 22-18 AWG, to get a sound termination.
5) Can I use these FINGRIP terminals on solid copper wire?
The conductor range is given for stranded copper, 12-10 AWG on one size and 22-18 AWG on the other. Insulated crimp disconnects like these are intended for stranded conductor; for solid wire in a panel, use a terminal or lug rated for solid conductor.
6) What is the difference between a female quick disconnect and a ring or fork terminal for control wiring?
A female quick disconnect slides onto a male blade and pulls off by hand, so you can break a circuit for troubleshooting without touching a screw. A ring or fork terminal lands under a screw or stud on a terminal block and stays put. Use the FINGRIP female disconnect where equipment gets swapped or tested; use ring terminals where the connection is permanent and vibration resistance matters.
7) What does the vinyl insulation on these disconnects actually protect against?
The vinyl sleeve covers the barrel and crimp area, shielding it from abrasion and incidental contact in a crowded enclosure. Vinyl is the standard insulation on general-purpose panel and control wiring terminals; if you're working at elevated temperatures you would specify nylon instead.
How fast can I get the Burndy QP10F25X03BG25 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Burndy QP10F25X03BG25 come with a warranty?
Absolutely. The Burndy QP10F25X03BG25 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Burndy QP10F25X03BG25?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Burndy QP10F25X03BG25 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!