You may also like
Topaz Lighting 1210 8 oz. Anti-Oxidant Contact Compound for Electrical Connections
Model: TOP-1210
Topaz Lighting 1210 8 oz. Anti-Oxidant Contact Compound for Electrical ConnectionsThe Topaz Lighting 1210 Anti-Oxidant Contact Compound is a professional-grade electrical protection compound supplied...
Topaz Lighting
$71.33
$28.34
"
Burndy PENE-8 Copper Anti-Oxidant Compound, 8 oz. Squeeze Bottle
The Burndy PENE-8 is a copper-to-copper anti-oxidant compound packaged in a convenient 8 oz. squeeze bottle for fast, controlled application at connector and terminal joints. Formulated with a 500°F dropping point and a -10°F pour point, this compound is engineered to protect copper conductors from oxidation across a wide range of job-site conditions. It is UL Listed and RoHS compliant, making it a dependable choice for electrical contractors who need consistent, code-conscious performance on copper connections.
Key Features
- Application: Formulated for use on copper to copper connections to help prevent oxidation at the joint.
- Container: 8 oz. squeeze bottle for controlled, mess-free dispensing during installation.
- Dropping Point: 500°F, supporting stable performance under elevated operating temperatures.
- Pour Point: -10°F, allowing the compound to remain workable in cold conditions.
- Viscosity: 250 at 100°F for consistent, even application to conductor surfaces.
- Compliance: RoHS compliant formulation for environmentally conscious electrical work.
Certifications & Compliance
- UL Listed
- RoHS Compliant
Technical Specifications
- Application For Use On: Copper to Copper
- Container Size: 8 oz.
- Container Type: Squeeze Bottle
- Csa Certified: N
- Culus: N
- Dropping Point F: 500
- Msds Applicable: Y
- Pour Point F: -10
- Rohs Compatible: Compliant
- Ul Listed: Y
- Ul Recognized: N
- Viscosity At 100f: 250
Typical Applications
- Copper Conductor Terminations
- Wire Connector and Splice Preparation
- Commercial and Industrial Electrical Wiring
- Oxidation Prevention at Copper Joints
- Renovation and New Construction Electrical Work
Why Burndy?
Burndy engineers connection products for professionals who need reliable performance at every joint. The PENE-8 anti-oxidant compound is UL Listed and RoHS compliant, giving electricians a trusted formulation for protecting copper-to-copper connections against oxidation over time. Its 8 oz. squeeze bottle format makes it a practical, job-ready addition to any electrical toolkit.
"Manufacturer Resources
Product Specs
- Application For Use On:
- Copper to Copper
- Container Size:
- 8 oz.
- Container Type:
- Squeeze Bottle
- CSA Certified:
- N
- CULUS:
- N
- Dropping Point F:
- 500
- Msds Applicable:
- Y
- Pour Point F:
- -10
- ROHS Compatible:
- Compliant
- UL Listed:
- Y
- Ul Recognized:
- N
- Viscosity At 100f:
- 250
- Product Type:
- Anti-Oxidant Compound
- Product Group:
- Jobsite Supplies
- Department:
- Electrical
- Product Subgroup:
- Chemicals & Sprays
Burndy PENE8 – Frequently Asked Questions
1) Can I use Burndy PENE-8 on aluminum conductors or aluminum-to-copper connections?
No. PENE-8 is formulated for copper to copper connections only. For aluminum or mixed aluminum-to-copper terminations you need an anti-oxidant rated for aluminum, not this one.
2) Is the Burndy PENE-8 anti-oxidant compound UL Listed?
Yes, the PENE-8 compound is UL Listed. It is not UL Recognized and not CSA certified, so if your inspector or spec calls specifically for a CSA marked joint compound, this one will not satisfy it.
3) Will this anti-oxidant compound still squeeze out in freezing weather?
The pour point is -10 degrees F, so the compound stays pourable and workable well below freezing. On a cold outdoor service change or a winter switchgear termination it will still dispense from the bottle.
4) Will the compound run out of a hot copper lug or busbar connection?
Its dropping point is 500 degrees F, which is the temperature at which the grease releases oil and flows. Normal copper conductor and lug operating temperatures sit far below that, so it stays in the joint rather than migrating out.
5) Is Burndy PENE-8 RoHS compliant for a LEED or green-spec electrical job?
Yes, the PENE-8 formulation is RoHS compliant, which covers the restricted-substance requirement that shows up on sustainable and institutional specs. An MSDS is applicable for this product, so it can be added to a site chemical binder.
6) How is the 8 oz Burndy PENE-8 packaged, and is it easy to apply in a panel?
It comes in an 8 oz squeeze bottle, so you dispense directly onto the conductor or into the lug barrel without a brush or scoop. With a viscosity of 250 at 100 degrees F it spreads evenly and stays where you put it inside a tight panel or pull box.
7) What is the correct part number to order for Burndy copper anti-oxidant in an 8 oz bottle?
Order Burndy PENE-8, manufacturer part number PENE8. That is the copper-to-copper anti-oxidant compound in the 8 oz squeeze bottle.
8) Where on the job would an electrician actually use PENE-8?
At copper terminations and splices: compression lugs, split bolts, mechanical connectors, and busbar joints where copper meets copper. Brush or squeeze it onto the cleaned conductor before inserting and crimping so the contact surface is sealed against oxidation from day one.
How fast can I get the Burndy PENE8 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Burndy PENE8 come with a warranty?
Absolutely. The Burndy PENE8 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Burndy PENE8?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Burndy PENE8 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.