Bussmann CCP Series Three-Pole...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$324.21
Bussmann CCP Series Three-Pole CUBEFuse Fusible Disconnect Switch

Bussmann CCP Series Three-Pole CUBEFuse Fusible Disconnect Switch

(No reviews yet) Write a Review

Model: CCP2-PB2

In Stock (leaves warehouse same day if ordered before 3pm ET)

$324.21
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Bussmann CCP Series Three-Pole CUBEFuse Fusible Disconnect Switch

The Bussmann series CCP fusible disconnect switch from Eaton is a UL98 fusible disconnect built around the Bussmann CUBEFuse fuse platform, rated 600 Vac and 125 Vdc with three-pole switching. This CCP series disconnect is available in amp ratings from 25A through 400A (25A, 30A, 60A, 225A, and 400A), giving specifiers a single disconnect switch platform that scales across a wide range of branch-circuit and feeder protection needs. The compact CUBEFuse form factor delivers a smaller-footprint disconnect compared to traditional fuse holders while maintaining full three-pole disconnect isolation for commercial and industrial power distribution systems.

Key Features

  • Amp Rating Range: Available in 25A, 30A, 60A, 225A, and 400A versions to match branch-circuit and feeder load requirements.
  • Voltage Rating: Rated 600 Vac and 125 Vdc for use across AC and DC power distribution applications.
  • Three-Pole Configuration: Three-pole switching delivers full disconnect isolation for three-phase circuits.
  • CUBEFuse Compatible: Built around the Bussmann CUBEFuse fuse platform for a compact, finger-safe fuse and disconnect combination.
  • UL98 Fusible Disconnect: Constructed to UL98 standards governing fusible disconnect switches.
  • Eaton Bussmann Series CCP: Part of the Eaton Bussmann series CCP fusible disconnect switch line.

Certifications & Compliance

  • UL98 Fusible Disconnect Switch Standard

Technical Specifications

  • Certifications: Contact Manufacturer
  • Series: CCP
  • Voltage Rating: 600 Vac / 125 Vdc
  • Amp Rating Range: 25A - 400A
  • Poles: Three-Pole
  • Fuse Platform: CUBEFuse

Typical Applications

  • Branch-Circuit and Feeder Protection
  • Commercial and Industrial Power Distribution
  • Panelboard and Switchboard Disconnect Applications
  • OEM Equipment Disconnect Switches
  • AC and DC Power Distribution Systems

Why Bussmann?

Eaton Bussmann series CCP disconnect switches combine UL98 fusible disconnect performance with the compact, finger-safe CUBEFuse platform, giving electrical professionals a reliable three-pole disconnect solution across a 25A to 400A range. Choosing Bussmann means specifying a recognized fuse and disconnect brand engineered for consistent, code-compliant performance in demanding electrical distribution systems.

Manufacturer Resources

Product Specs

Certifications:
Contact Manufacturer
Department:
Electrical
Product Type:
Fusible Disconnect Switch
Series:
CCP
Voltage Rating:
600 Vac / 125 Vdc
Amperage Rating:
25A - 400A
Configuration:
Three-Pole
Standards:
UL98
Product Group:
Wiring Devices

Bussmann CCP2-PB2 – Frequently Asked Questions

1) What voltage and amp ratings does the Bussmann CCP Series three-pole fusible disconnect cover?
The Bussmann CCP Series CUBEFuse disconnect is rated 600 Vac and 125 Vdc, with three-pole switching. Amp ratings run 25A, 30A, 60A, 225A and 400A, so one switch platform covers small branch circuits up through feeder-size loads. The DC rating means it can be used in DC distribution as well as standard three-phase AC gear.
2) Which CCP part number do I order for a 60 amp three-phase disconnect?
For 60A, the part number is CCP-3-60CF. The rest of the range orders as CCP-1-30CF for 30A, CCP-1-60CF for the 25A version, CCP2-PB2 at 225A and CCP2-PB6 at 400A. Note that the 25A and 30A units both carry CCP-1 numbering, so order by the amp rating you need rather than by assuming the number matches the ampere value.
3) Does the CCP disconnect take standard Class J or Class CC fuses, or only CUBEFuse?
The CCP is built around the Bussmann CUBEFuse platform, so it takes CUBEFuse fuses, not conventional ferrule or blade-style cartridge fuses. If your panel is stocked with traditional fuse classes, you either change the fuse stock to CUBEFuse or specify a different fusible disconnect. The trade-off is footprint: the CUBEFuse body is smaller than a traditional fuse holder assembly of the same rating, and it is finger-safe.
4) Is a fusible disconnect like the CCP the right choice, or should I use a molded case circuit breaker?
A fusible disconnect gives you a switch for isolation plus replaceable current-limiting fuses, which is what most panelboard, switchboard and OEM equipment disconnects are specified as when fuse-based protection is on the drawing. The CCP is a UL98 fusible disconnect switch, the standard that governs this class of device, and it switches all three poles for full isolation of a three-phase circuit. If your spec calls for a breaker instead, this is not a substitute; if it calls for fuse protection in a tight enclosure, the CUBEFuse form factor is the reason to choose the CCP over a larger traditional fused switch.
5) Can I use the Bussmann CCP on a single-phase or DC circuit?
The CCP is a three-pole device, so on single-phase you would be using two of the three poles and leaving one idle, which is common practice but means you are buying more switch than the circuit needs. For DC, the switch carries a 125 Vdc rating, so DC distribution up to that voltage is within its ratings. On three-phase AC it is rated to 600 Vac.
6) Will the 225A and 400A CCP units mount the same way as the smaller 25A to 60A ones?
They are different physical builds. The 25A through 60A units carry CCP-1 and CCP-3 numbering, while 225A and 400A are the CCP2 series (CCP2-PB2 and CCP2-PB6). Treat the CCP2 sizes as a separate frame when you lay out enclosure space or plan a like-for-like swap, and match the CUBEFuse rating to the frame you order.
7) Why does the CUBEFuse disconnect matter for panel space in a tight equipment enclosure?
Footprint is the main reason contractors and OEM panel builders pick it. The CUBEFuse form factor gives a smaller disconnect than a traditional fuse holder at the same rating while still providing three-pole isolation, which matters when you are fitting a 600 Vac disconnect into machine-mounted control gear or a crowded panelboard. The fuse body is also finger-safe, which is worth noting for maintenance staff working in live panels.
How fast can I get the Bussmann CCP2-PB2 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bussmann CCP2-PB2 come with a warranty?
Absolutely. The Bussmann CCP2-PB2 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bussmann CCP2-PB2?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Bussmann CCP2-PB2 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!