Bussmann CCPB Series Finger-Safe Fusible Disconnect, 600V Class CF
The Bussmann CCPB Series from Eaton is a UL98 listed fusible disconnect switch built for single-pole, Class CF fuse applications rated 600V. Engineered with a Finger Safe design and a Lock-On provision, the CCPB switch reduces exposure to energized parts during fuse service and supports lockout/tagout procedures on de-energized circuits. This family is available in amp ratings from 15A to 100A, including 15A, 20A, 30A, 40A, 50A, 60A, 70A, 90A, and 100A options, with an interrupt rating up to 200kA for demanding circuit-protection duty in industrial and commercial electrical systems.
Key Features
- Amp Rating Range: Available in 15A, 20A, 30A, 40A, 50A, 60A, 70A, 90A, and 100A ratings to match a wide range of circuit load requirements.
- Fusible Disconnect Type: UL98 listed fusible disconnect switch, configured single-pole with a Class CF fuse holder design.
- Finger Safe Design: Touch-safe construction helps reduce exposure to energized components during fuse replacement and routine service.
- Lock-On Provision: Built-in Lock-On provision supports lockout/tagout safety procedures on de-energized circuits.
- Voltage Rating: Rated 600V for use in demanding industrial and commercial circuit-protection applications.
- Interrupt Rating: Up to 200kA interrupt rating for coordinated short-circuit protection.
- Class CF Compatibility: Designed for Class CF fuses to help ensure proper fuse fit and coordinated overcurrent protection.
- Single-Pole Configuration: Single-pole switch construction simplifies installation in single-phase circuit-protection assemblies.
Certifications & Compliance
- UL98 Listed Fusible Disconnect
- CE Marked
Technical Specifications
- Product Width: .12 IN
- Certifications: Contact Manufacturer
- Compliances: CE Marked
Typical Applications
- Industrial and Commercial Circuit Protection
- Panelboard and Switchboard Disconnect Switches
- Motor and Feeder Circuit Disconnects
- Lockout/Tagout Safety Procedures
- Renovation and New Construction Electrical Systems
Why Bussmann?
Bussmann by Eaton builds the CCPB Series to UL98 listing standards, pairing Finger Safe construction with a Lock-On provision so electrical professionals get dependable, code-compliant circuit protection across the full 15A-100A range. With a Class CF fuse design rated 600V and up to 200kA interrupt capability, the CCPB Series delivers the safety and coordinated protection required for reliable industrial and commercial installations. The CE Marked designation further supports use across a broad range of professional electrical projects.
Manufacturer Resources
Product Specs
- Class:
- Class CF
- Short Circuit Rating:
- 200KA
- Product Type:
- Fusible Disconnect
- Product Width:
- .12 IN
- Product Details:
- UL98 fusible disconnect
- Special Features:
- Finger Safe, Lock-On provision
- Product Group:
- Circuit Protection
- Certifications:
- Contact Manufacturer
- Compliances:
- CE Marked
- Department:
- Electrical
- Voltage Rating:
- 600V
- Product Subgroup:
- Breakers / Disconnects
- Amperage Rating:
- 15A-100A
- Configuration:
- Single-Pole
- Series:
- CCPB
- Standards:
- CE Marked
Bussmann CCPB-1-100CF – Frequently Asked Questions
1) What fuse does the Bussmann CCPB disconnect take?
The CCPB takes Class CF fuses only. It is built as a single-pole Class CF fuse holder and disconnect in one, rated 600V. Class CF fuses are a finger-safe form factor, so a standard Class J, CC or RK fuse will not seat in it. Order the fuse separately, matched to the amp rating of the switch you buy.
2) What amp ratings does the Bussmann CCPB fusible disconnect come in?
Nine ratings across the family: 15, 20, 30, 40, 50, 60, 70, 90 and 100 amps. The part numbers follow the pattern CCPB-1-30CF for 30A and CCPB-1-100CF for 100A. There is no 80A in the line, so if your feeder calls for 80 you are choosing between the 70A and the 90A.
3) Is the Bussmann CCPB rated for a 200kA available fault current?
Short circuit rating is 200kA, so the CCPB coordinates with service-entrance and industrial feeds that have high available fault current. It is a UL98 listed fusible disconnect switch and is CE marked.
4) How many CCPB disconnects do I need for a three-phase circuit?
Each CCPB is a single-pole device, so a three-phase circuit needs three of them, one per phase, all at the same amp rating. Single-phase two-wire takes two. They are built to gang on a panel, which is how they are used in panelboard and switchboard disconnect assemblies.
5) Can I use the CCPB for lockout/tagout on a motor circuit?
The CCPB has a Lock-On provision built in, which supports lockout/tagout procedures on de-energized circuits. It is used as a motor and feeder circuit disconnect as well as in panelboard and switchboard assemblies. Confirm the lockout hardware you use fits the provision before you write it into a procedure.
6) Is the Bussmann CCPB safe to change fuses on without full PPE exposure to live parts?
The CCPB uses a finger-safe design that reduces exposure to energized parts during fuse replacement and routine service. That is the main reason people pick Class CF over an open Class J or R holder. It does not change your arc-flash obligations, but the touch-safe construction and the Lock-On provision are both there to support safe service work.
7) Will the Bussmann CCPB work on a 480V three-phase system?
Yes. It carries a 600V rating, which covers 480V and 600V systems as well as 240V and 208V. Use one pole per phase.
8) Does the CCPB come with the fuse included?
No. The CCPB is the disconnect switch and Class CF fuse holder. The Class CF fuse is a separate order, sized to your circuit load and matched to the switch amp rating, whether that is the 15A CCPB-1-15CF or the 100A CCPB-1-100CF.
How fast can I get the Bussmann CCPB-1-100CF delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bussmann CCPB-1-100CF come with a warranty?
Absolutely. The Bussmann CCPB-1-100CF is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bussmann CCPB-1-100CF?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bussmann CCPB-1-100CF from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.