Bussmann FHL10U Eaton Series T...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$1,527.18
Bussmann FHL10U Eaton series, military fuse holder, 250v, 30a, grey, panel, for use with f02, f03 fuse, non indicating, two-pole

Bussmann FHL10U Eaton Series Two-Pole Military Fuse Holder, 250V 30A

(No reviews yet) Write a Review

Model: FHL10U
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$1,527.18
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Bussmann FHL10U Eaton Series Two-Pole Military Fuse Holder, 250V 30A

The Bussmann FHL10U is part of the Eaton Bussmann series of military-style fuse holders, engineered for panel-mount installation in a two-pole configuration. Rated 250V at 30A, this non-indicating fuse holder is designed for use with F02 and F03 fuses and features a grey housing suited for control panel and equipment applications. Its compact panel-mount build makes it a dependable choice for circuits that require reliable overcurrent protection.

Key Features

  • Compact Panel-Mount Dimensions: Measures 3.88 in length/depth, 1.81 in height, and 1.19 in width for space-conscious panel installations.
  • Two-Pole Configuration: Panel-mount military-style fuse holder supports two-pole circuits for balanced overcurrent protection.
  • Fuse Compatibility: Designed for use with F02 and F03 fuses, matching the Eaton Bussmann military fuse holder line.
  • Electrical Rating: Rated 250V at 30A for dependable overcurrent protection in low- to medium-amperage circuits.
  • Non-Indicating Design: Non-indicating construction keeps the fuse holder straightforward for panel-mount installation and servicing.
  • Grey Finish: Grey housing color for consistent panel appearance.

Technical Specifications

  • Amperage Rating: 30 A
  • Voltage Rating: 250 V
  • Fuse Indicator: Non-indicating
  • Compliances: Contact factory
  • Product Height: 1.81 in
  • Product Length Depth: 3.88 in
  • Product Width: 1.19 in
  • Product Weight: .3 lb

Typical Applications

  • Military and Mil-Spec Electrical Panel Wiring
  • Control Panel and Equipment Fuse Protection
  • Two-Pole Circuit Overcurrent Protection
  • Panel-Mount Fuse Assemblies for F02/F03 Fuses
  • Commercial and Industrial Electrical Systems

Why Bussmann?

Bussmann is a trusted Eaton brand recognized for dependable circuit protection components used across commercial, industrial, and military-grade electrical systems. The FHL10U fuse holder reflects that standard, delivering a panel-mount, two-pole, non-indicating design rated for 250V and 30A with F02/F03 fuse compatibility. Choose Bussmann for consistent, dependable fuse holder performance in demanding electrical installations.

Manufacturer Resources

Product Specs

Amperage Rating:
30 A
Compliances:
Contact factory
Fuse Indicator:
Non-indicating
Mounting Method:
Panel
Number Of Poles:
Two-pole
Product Height:
1.81 in
Product Length Depth:
3.88 in
Product Weight:
.3 lb
Product Width:
1.19 in
Used With:
For use with F02, F03 fuse
Voltage Rating:
250 V
Product Group:
Fuses
Department:
Electrical
Product Subgroup:
Other Fuses
Product Type:
Military fuse holder
Product Details:
Military fuse holder
Product Color:
Grey

Bussmann FHL10U – Frequently Asked Questions

1) Can I use the Bussmann FHL10U on a 120V control circuit at 20 amps?
Yes. The holder carries a 250V, 30A rating, which is the maximum it is rated for, so a 120V circuit fused at 20A sits inside that. The rating is a ceiling, not a requirement.
2) How much panel space do I need to mount the FHL10U two-pole fuse holder?
Plan for a body measuring 3.88 x 1.81 x 1.19 inches (length/depth, height, width). It mounts through the panel, so the 3.88 inch dimension is the one to watch for clearance behind the door, and the 1.19 inch width is what sets how tightly you can gang holders side by side. It weighs .3 lb, so no extra bracing is needed.
3) Does the FHL10U protect both legs of a circuit, or do I need two of them?
One FHL10U covers both legs. It is a two-pole holder, so it carries two fuses in a single body for a two-wire circuit. You would only need a second unit for a third leg, such as a three-phase feed.
4) Are fuses included with the Bussmann FHL10U fuse holder?
The FHL10U is the holder only. You order the F02 or F03 fuses separately, sized to the load you are protecting, up to the holder's 30A ceiling, and you need two of them to fill both poles.
5) Will the Bussmann FHL10U show me which fuse has blown?
No. It is a non-indicating holder, so there is no lamp or pop-up flag to tell you a fuse has opened. Troubleshooting means pulling and checking the fuses, or metering across the holder. If your maintenance crew needs at-a-glance fault location, specify an indicating holder instead.
6) Is the FHL10U a DIN rail fuse holder?
No, it is panel mount. It goes through a cutout in the enclosure panel or door rather than clipping onto DIN rail. If your enclosure is laid out entirely on rail, you would need a rail-mount holder or a mounting adapter.
7) What part number do I order for the Bussmann two-pole military fuse holder?
Order Bussmann FHL10U. That is the manufacturer part number for the Eaton Bussmann military-style two-pole panel-mount holder rated 250V 30A, and it is a single configuration, so there are no finish or size suffixes to add.
8) What does the FHL10U look like once installed in a control panel?
The housing is grey, which matches the usual run of control panel components, so a bank of them reads consistently across a door. Only the one color is offered on this model.
How fast can I get the Bussmann FHL10U delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bussmann FHL10U come with a warranty?
Absolutely. The Bussmann FHL10U is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bussmann FHL10U?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Bussmann FHL10U from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!