You may also like
Bussmann KAX Series Semiconductor Fuse, 1000VDC Non-Indicating
Model: BUS-KAX
Bussmann KAX Series Semiconductor Fuse, 1000VDC Non-IndicatingThe Bussmann KAX Series semiconductor fuse from Eaton is engineered to protect sensitive power semiconductor devices — including SCRs,...
Bussmann
Starting at
$149.34
Bussmann FMG-211 Automotive Bolt-In Fuse, Non-Indicating, 5/16-18 Studs
The Bussmann FMG-211 is an Eaton Bussmann series FMG automotive bolt-in fuse engineered to serve as a dependable circuit protector for automotive and heavy-duty vehicle electrical systems. This non-indicating fuse uses 5/16-18 studs for a secure bolt-in mounting and electrical connection, and it ships with nuts and cover already installed so it is ready to drop into a circuit with minimal assembly. Finished in black, the FMG-211 combines the stud-mount bolt-in format common to high-current automotive fuse blocks with the straightforward, non-indicating construction electricians and vehicle technicians rely on for consistent overcurrent protection.
Key Features
- Stud Connection: 5/16-18 studs provide a secure bolt-in mounting point and low-resistance electrical connection at each terminal.
- Nuts and Cover Installed: Ships from the factory with nuts and a protective cover pre-installed, reducing assembly time and loose-parts handling during installation.
- Non-Indicating Design: Built as a non-indicating circuit protector, keeping the fuse construction simple and focused on reliable overcurrent interruption.
- Automotive Bolt-In Fuse: Eaton Bussmann series FMG bolt-in format is sized and configured for automotive and mobile equipment circuit protection.
- Black Finish: Black housing for standard automotive fuse block and panel appearance.
- Series FMG Construction: Part of the Eaton Bussmann series FMG family of automotive bolt-in fuses built for demanding vehicle electrical environments.
Technical Specifications
- Compliances: Contact factory
- Connection: 5/16 inch - 18 TPI stud
- Fuse Indicator: Non-indicating
Typical Applications
- Automotive Electrical Circuit Protection
- Bolt-In Fuse Installations on Fuse Blocks and Panels
- OEM and Aftermarket Automotive Wiring Repair
- Automotive Junction Box and Distribution Panel Protection
- Heavy-Duty Truck, Bus, and Mobile Equipment Electrical Systems
- Marine and Off-Road Vehicle Circuit Protection
Why Bussmann?
Bussmann by Eaton is a widely recognized name in circuit protection, and the FMG-211 series FMG bolt-in fuse reflects that standard with its non-indicating design, secure 5/16-18 stud connection, and factory-installed nuts and cover for faster, cleaner installation. Choose the Bussmann FMG-211 for dependable, consistent overcurrent protection in automotive and mobile equipment electrical systems where a bolt-in, stud-mount fuse format is required.
Manufacturer Resources
Product Specs
- Compliances:
- Contact factory
- Connection:
- 5/16 inch - 18 TPI stud
- Fuse Indicator:
- Non-indicating
- Product Height:
- 11 in
- Product Length Depth:
- 20.7 in
- Product Weight:
- .2 lb
- Product Width:
- 12.8 in
- Special Features:
- Nuts and cover installed
- Department:
- Electrical
- Product Color:
- Black
- Product Type:
- Fuse
- Product Group:
- Circuit Protection
- Product Subgroup:
- Fuses
- Product Length:
- 20.7 in
Bussmann FMG-211 – Frequently Asked Questions
1) What stud size does the Bussmann FMG-211 bolt-in fuse use?
The FMG-211 terminates on 5/16 inch - 18 TPI studs, one at each end, so it bolts straight to a stud-mount fuse block or distribution panel rather than clipping in. If your block is drilled for 5/16-18 hardware or ring terminals sized for a 5/16 inch stud, the connection mates. Nuts come already installed on the studs from the factory.
2) Is the Bussmann FMG-211 an indicating fuse? I need to see when it blows.
No. The FMG-211 is a non-indicating fuse, so there is no pop-up pin or window to show an open element. Technicians diagnose it by voltage or continuity check across the studs. If your service procedure depends on a visual blown-fuse flag, specify an indicating version of the series FMG instead.
3) Does the Bussmann FMG-211 come with the mounting nuts and a terminal cover, or do I order those separately?
Both are included. The FMG-211 ships with nuts and the protective cover already installed on the fuse, so there are no loose parts to source or lose at install. You still supply the ring terminals, cable and the block or panel it mounts to.
4) Can I use a bolt-in fuse like the Bussmann FMG-211 in a heavy truck or marine panel, or is it strictly automotive?
The series FMG bolt-in format is intended for automotive and mobile equipment circuit protection, and that covers heavy-duty truck, bus, marine and off-road distribution panels as well as passenger-vehicle junction boxes. The deciding factor is mechanical: the circuit has to be built around 5/16-18 stud terminals. Blade-style or ANL/MIDI holders will not accept it.
How fast can I get the Bussmann FMG-211 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bussmann FMG-211 come with a warranty?
Absolutely. The Bussmann FMG-211 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bussmann FMG-211?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bussmann FMG-211 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.