Bussmann FWP-60 High-Speed Fus...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$578.60
Bussmann FWP-60 Eaton series FWP high speed fuse, 250 Vac/dc, Std Pkg, Non Indicating

Bussmann FWP-60 High-Speed Fuse, 60A, 250 Vac/dc, Non-Indicating

(No reviews yet) Write a Review

Model: FWP-60
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$578.60
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Bussmann FWP-60 High-Speed Fuse, 60A, 250 Vac/dc, Non-Indicating

The Bussmann FWP-60 is an Eaton Bussmann series FWP high-speed fuse rated 60A at 250 Vac/dc, engineered for fast-acting protection of semiconductor devices and power electronics. This non-indicating fuse ships in Bussmann's standard packaging configuration and is built to deliver dependable overcurrent protection in demanding industrial power distribution and control applications. The FWP series is designed to provide the rapid clearing time required to safeguard sensitive solid-state components from damaging fault currents, helping protect connected equipment and reduce downtime.

Key Features

  • Amperage Rating: 60A rating provides dependable overcurrent protection sized for semiconductor and power electronic circuits.
  • Voltage Rating: 250 Vac/dc dual rating supports use in both AC and DC circuit applications.
  • High-Speed Fuse Design: Eaton Bussmann series FWP construction delivers fast clearing times engineered to protect sensitive semiconductor devices from damaging fault currents.
  • Non-Indicating Construction: standard non-indicating design for straightforward installation without a blown-fuse indicator window.
  • Standard Packaging: supplied in Bussmann's Std Pkg (Standard Packaging) configuration for consistent stocking and distribution.
  • Compact Dimensions: measures 4.35 in in height with a .75 in width and .75 in depth, and weighs just .18 lb, allowing easy mounting in compatible fuse blocks and fuse holders.

Technical Specifications

  • Amperage Rating: 60 A
  • Compliances: Contact factory
  • Packaging Type: Standard
  • Product Height: 4.35 in
  • Product Length Depth: .75 in
  • Product Weight: .18 lb
  • Product Width: .75 in

Typical Applications

  • Semiconductor and Power Electronics Circuit Protection
  • Industrial Control Panels and Motor Drive Systems
  • Power Distribution Equipment
  • OEM Equipment Requiring High-Speed Fuse Protection
  • Replacement and Maintenance of Existing Bussmann FWP Installations

Why Bussmann?

Bussmann by Eaton is a long-trusted name in circuit protection, and the FWP series high-speed fuse reflects that engineering standard with its 60A, 250 Vac/dc dual voltage rating built specifically for demanding semiconductor protection duty. Its non-indicating construction and standard packaging configuration make it a straightforward, dependable option for professionals specifying or replacing high-speed fuses in industrial power electronics. Choose the Bussmann FWP-60 for consistent, reliable overcurrent protection engineered by a name electricians and engineers trust.

Manufacturer Resources

Product Specs

Amperage Rating:
60A
Compliances:
Contact factory
Fuse Indicator:
Non Indicating
Packaging Type:
Standard
Product Height:
4.35 in
Product Length Depth:
.75 in
Product Weight:
.18 lb
Product Width:
.75 in
Voltage Rating:
250 Vac/dc
Department:
Electrical
Product Type:
Semiconductor Fuse
Product Group:
Circuit Protection
Product Subgroup:
Fuses
Product Length:
0.75 in

Bussmann FWP-60 – Frequently Asked Questions

1) Can the Bussmann FWP-60 be used on a DC circuit, or is it AC only?
The FWP-60 carries a dual 250 Vac/dc rating, so it works in either AC or DC circuits up to 250 volts. That dual rating is why it shows up in motor drive DC buses and battery-fed power electronics as well as AC control panels. Do not apply it above 250 volts on either side.
2) Will the FWP-60 fit my existing fuse block, and what are its dimensions?
Body dimensions are 4.35 in height with .75 in width and .75 in depth, and it weighs .18 lb. Check that against the opening and clip or stud centers on your block or holder. Because high-speed semiconductor fuses are not dimensionally interchangeable with standard class fuses, measure before assuming a drop-in.
3) Should I use a high-speed semiconductor fuse like the FWP-60 or a standard time-delay fuse for a drive?
Use the high-speed type when the thing you are protecting is solid state. The FWP series clears fast enough to limit let-through energy into diodes, SCRs, and IGBTs, which fail in milliseconds. A time-delay fuse is the right choice when you need to ride through motor inrush on a across-the-line starter, but it will not save a semiconductor bridge. If the drive manufacturer calls for a semiconductor fuse, a standard fuse of the same amperage is not a substitute.
4) I need to replace a blown FWP-60 in an existing panel. Is this the same part?
Yes, the manufacturer part number is FWP-60, the Eaton Bussmann series FWP high-speed fuse at 60 A, 250 Vac/dc, non-indicating. If the fuse coming out of your holder is stamped FWP-60, this is the identical replacement. If it is stamped with a suffix or a different series prefix, match that marking instead.
5) Does the Bussmann FWP-60 have a blown-fuse indicator?
No. The FWP-60 is non-indicating, so there is no indicator window or pin to trip a microswitch. If your panel relies on visual or electrical blown-fuse detection, you will need an indicating version of the fuse or a separate monitoring method.
6) Is the FWP-60 a 60 amp fuse, and how do I size it for a semiconductor circuit?
It is rated 60 A at 250 Vac/dc. High-speed fuses are sized to the semiconductor's withstand capability rather than just the load current, so follow the drive or rectifier manufacturer's recommended fuse amperage. If their documentation calls for a different amperage in the FWP family, order that rating rather than derating the 60 A part.
7) How does the FWP-60 ship for MRO stocking?
It comes in Bussmann's standard packaging configuration, which keeps counts consistent if you are stocking spares across multiple panels. Only the one model, FWP-60, is sold on this part number, so there are no finish or packaging options to specify when ordering.
How fast can I get the Bussmann FWP-60 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bussmann FWP-60 come with a warranty?
Absolutely. The Bussmann FWP-60 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bussmann FWP-60?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Bussmann FWP-60 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!