Bussmann HLQ-3-2/10 In-Line Fu...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$19.33
Bussmann HLQ-3-2/10 In-Line Fuseholder for GLQ Fuses, 300V

Bussmann HLQ-3-2/10 In-Line Fuseholder for GLQ Fuses, 300V

(No reviews yet) Write a Review

Model: HLQ-3-2/10

In Stock (leaves warehouse same day if ordered before 3pm ET)

$19.33
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like

Bussmann HLQ-3-2/10 In-Line Fuse Holder Assembly

The Bussmann HLQ-3-2/10 is an in-line fuse holder assembly engineered to provide a secure, accessible mounting point for a fuse within an electrical wiring run. Rather than requiring a separate panel-mounted fuse block, this in-line design lets installers splice fuse protection directly into a wire harness, control circuit, or equipment lead. Manufactured by Bussmann, a long-standing name in circuit protection components, the HLQ-3-2/10 is identified by its specific model designation for easy specification, cross-reference, and reordering. This fuseholder is intended for electricians, panel builders, and OEM assemblers who need a dependable way to add or maintain fuse protection in the field, and it should be specified alongside the correct fuse type for the circuit being protected.

Key Features

  • In-Line Mounting Configuration: Designed to be spliced directly into a wiring run, eliminating the need for a separate panel-mounted fuse block in space-constrained installations.
  • Bussmann HLQ Series Identification: Marked with the HLQ-3-2/10 model designation, making it easy to match, cross-reference, and reorder the correct fuseholder for a given application.
  • Serviceable Fuse Access: Provides a dedicated holder body so the enclosed fuse can be inspected, tested, and swapped without disturbing the surrounding wiring or connections.
  • Field and OEM Ready: Suited to both new installation work and maintenance or repair scenarios where an existing in-line fuse needs to be replaced or upgraded.
  • Bussmann Manufacturing: Produced by Bussmann, a widely recognized supplier of fuses and fuseholder hardware for electrical and electronic circuit protection.

Technical Specifications

  • Refer to manufacturer documentation for complete technical specifications.

Typical Applications

  • In-Line Fuse Protection for Wiring Harnesses and Cable Runs
  • OEM Equipment and Panel Assembly Fuse Mounting
  • Field Replacement of Existing In-Line Fuseholders
  • Electrical and Electronic Equipment Circuit Protection
  • Maintenance and Repair of Fused Circuits

Why Bussmann?

Bussmann has built a reputation as a trusted source for fuses and fuseholder hardware used across commercial, industrial, and OEM electrical applications. Choosing a Bussmann in-line fuseholder like the HLQ-3-2/10 means specifying a component from a manufacturer whose fuse protection products are widely referenced throughout the electrical trade. For electricians, panel builders, and equipment assemblers, that consistency simplifies sourcing and helps keep fuse protection details straightforward from installation through future maintenance and repair work.

Product Specs

Product Type:
Fuse Holder
Department:
Electrical
Product Group:
Circuit Protection
Product Subgroup:
Fuse Holders & Blocks
Number Of Poles:
Single-pole
Product Height:
0.85 in
Voltage Rating:
300V
Product Width:
0.85 in
Product Length:
2.25 in

Bussmann HLQ-3-2/10 – Frequently Asked Questions

1) What fuse does the Bussmann HLQ-3-2/10 in-line fuseholder take?
The HLQ-3-2/10 is built around GLQ series fuses and is rated 300V. Order the fuse separately, sized for the circuit you're protecting, since the holder ships as the holder body only.
2) Does the HLQ-3-2/10 fuseholder come with a fuse?
No. The HLQ-3-2/10 is the fuseholder assembly on its own and must be specified alongside the correct GLQ fuse for the circuit being protected. Add the fuse amperage you need to the same order so the assembly is complete when it reaches the job.
3) Can I use an in-line fuseholder instead of a panel-mounted fuse block?
That's exactly what the HLQ-3-2/10 is for. It splices directly into a wire harness, control circuit, or equipment lead, so you don't have to find panel space for a separate fuse block. If you need multiple circuits fused in one place, or want a fixed service point behind a dead front, a panel-mounted block is the better choice; the in-line holder makes sense where space is tight or the fuse sits out on a lead.
4) What is the difference between the Bussmann HLQ-3-2/10 and the HLQ-3-2/10-T?
Two configurations are offered: the standard HLQ-3-2/10 and the HLQ-3-2/10-T, which carries the T suffix on the part number. Both are the same 300V in-line GLQ fuseholder family, so specify the suffix exactly as it appears on the unit you are matching or replacing.
5) Can the fuse be changed without cutting into the wiring?
Yes. The holder body encloses the fuse so it can be inspected, tested, and swapped without disturbing the splices or surrounding connections. That is the practical reason panel builders and maintenance crews use an in-line holder rather than a hard-spliced fuse link.
6) Is the Bussmann HLQ-3-2/10 suitable for replacing an existing in-line fuseholder in the field?
It's intended for both new installs and field replacement of an existing in-line fuseholder, including OEM equipment and panel assembly work. When you're swapping one out, confirm the unit you're removing is a GLQ-type holder at 300V or less so the fuse you already stock still fits.
How fast can I get the Bussmann HLQ-3-2/10 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bussmann HLQ-3-2/10 come with a warranty?
Absolutely. The Bussmann HLQ-3-2/10 is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bussmann HLQ-3-2/10?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the Bussmann HLQ-3-2/10 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!