Bussmann MIS Series Non-Time-Delay Ferrule End Control Circuit Fuse, 600V
The Bussmann MIS Series is an Eaton Bussmann non-time-delay fuse engineered for 480 V control circuits and PLC circuits, available in amp ratings from 1A through 12A to match a range of control circuit protection needs. Each fuse features a non-indicating, ferrule end x ferrule end construction and carries a 200 kAIC interrupt rating at 600 Vac, with a 600 V standard voltage rating for dependable short-circuit protection. Built by Eaton Bussmann, the MIS Series delivers consistent, code-compliant performance for industrial control panels, machine control systems, and PLC-based equipment where reliable overcurrent protection is essential.
Key Features
- Amp Rating Range: Available in 1A, 2A, 5A, 10A, and 12A ratings to suit a variety of control circuit and PLC circuit protection requirements.
- Non-Time-Delay Operation: Fast-acting, non-time-delay design suited for 480 V control circuits and PLC circuits.
- Ferrule End Construction: Ferrule end x ferrule end terminals for compatibility with standard control circuit fuse blocks and holders.
- High Interrupt Rating: 200 kAIC interrupt rating at 600 Vac supports reliable protection against high fault currents.
- Voltage Rating: Rated 600 V standard, with 480 V control circuit and 600 Vac ratings covering common industrial control voltages.
- Non-Indicating Design: Standard non-indicating body for straightforward fuse block installation and replacement.
- Standard Fuse Type: Classified as a Standard type fuse within the Bussmann MIS Series lineup for consistent control circuit protection.
Certifications & Compliance
- CE Marked
Technical Specifications
- Product Weight: .3 lb
- Voltage Rating: 600V
- Compliances: CE Marked
Typical Applications
- Control Circuit Protection
- PLC (Programmable Logic Controller) Circuit Protection
- Industrial Control Panels
- Machine Control Systems
- OEM Equipment Protection
- Motor Control Centers
Why Bussmann?
Bussmann fuses from Eaton are built for dependable circuit protection in demanding industrial environments, and the MIS Series is no exception, combining a 200 kAIC interrupt rating at 600 Vac with ferrule end construction for secure connections in control circuit and PLC applications. With CE Marked compliance and a 600 V standard voltage rating, the MIS Series gives electrical professionals a trusted, code-compliant option across its full 1A to 12A amp rating range, backed by the reliability electrical contractors expect from the Bussmann name.
Manufacturer Resources
Product Specs
- Packaging Type:
- Standard
- Department:
- Electrical
- Fuse Indicator:
- Non-indicating
- Product Weight:
- .3 lb
- Voltage Rating:
- 600V
- Compliances:
- CE Marked
- Interrupt Rating:
- 200 kAIC at 600 Vac
- Product Type:
- Fast-Acting Fuse
- Standards:
- CE Marked
- Configuration:
- Non-Time-Delay
- Product Group:
- Circuit Protection
- Product Subgroup:
- Fuses
Bussmann MIS-10 – Frequently Asked Questions
1) What amp ratings does the Bussmann MIS Series control circuit fuse come in?
The MIS Series covers five ratings: 1A (MIS-1), 2A (MIS-2), 5A (MIS-5), 10A (MIS-10) and 12A (MIS-12). That range is aimed at control and PLC circuits, so if you are protecting a transformer secondary or a PLC power supply, pick the rating your panel schedule calls for within 1A to 12A.
2) Will a Bussmann MIS fuse fit my existing control circuit fuse block?
Terminals are ferrule end by ferrule end, so it drops into standard control circuit fuse blocks and clip-style holders rather than needing bolted or blade-type mounting. Confirm the block is sized for the MIS body before you order a panel's worth.
3) Can I use the MIS Series on a 480V control circuit?
Yes. The MIS Series is built for 480 V control and PLC circuits and carries a 600 V rating, with a 200 kAIC interrupting rating at 600 Vac. That covers the usual 120 V, 240 V and 480 V control voltages found in industrial panels.
4) Is the MIS Series a time-delay fuse or fast-acting?
Non-time-delay, meaning fast-acting. That suits control and PLC circuits with little inrush. If you are feeding a control transformer primary or a motor starter coil that pulls a heavy momentary inrush, a non-time-delay fuse can nuisance open and you want a time-delay class instead.
5) Will I be able to tell at a glance if an MIS fuse has blown?
No. The MIS body is non-indicating, so there is no pop-out pin or window to show an open element. Troubleshooting means metering across the fuse or pulling it. If maintenance crews need visual identification in a large panel, specify an indicating control circuit fuse instead.
6) Does the Bussmann MIS fuse have any compliance markings for export panels?
The MIS Series is CE Marked, which is what matters when a control panel or OEM machine is destined for European deployment. That is the marking stated for this series.
7) Is the 200 kAIC rating on the MIS Series enough for a motor control center with high available fault current?
200 kAIC at 600 Vac is the interrupting rating, which is above the available fault current at essentially any control circuit tap off an MCC or industrial service. For short circuit current rating documentation on the panel, that is the figure to cite for the fuse itself.
8) What is the correct replacement part number for a blown Bussmann MIS fuse?
Match the amp rating in the part number: MIS-1, MIS-2, MIS-5, MIS-10 or MIS-12. The series designation stays the same across all five, so only the trailing number changes, and all share the same ferrule end construction and 600 V rating.
9) How is the MIS Series packaged, and what does one fuse weigh?
Standard packaging, with a product weight of .3 lb per fuse. Useful if you are ordering a stocking quantity for a maintenance crib and need shipping weight for a pallet or parcel estimate.
How fast can I get the Bussmann MIS-10 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Bussmann MIS-10 come with a warranty?
Absolutely. The Bussmann MIS-10 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Bussmann MIS-10?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Bussmann MIS-10 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.