Calibre Door Closers PV1000 3/4" Offset Flush Pivot Set
- A380 aluminum alloy precision die cast pivot portions.
- Oilite bronze bushing in top frame pivot portion.
- Case hardened, spring loaded pin in Top Door pivot portion.
- Full race ball bearing in Bottom Door Pivot portion.
- Steel reinforcement plates for door portions provided with PV-5000 and PV-7000.
- Bottom Door pivot portion with 3/16” vertical height adjustment in the bearing with PV-5000 and PV-7000. Case hardened pivot stud in Floor/Jamb pivot portioned
- Floor/Jamb portion with 1/8" vertical height adjustment.
Resources
Manufacturer Resources
Calibre Product Catalog 2026
Product Specs
- Subcategory:
- Door Pivots
- Series:
- CA/Hardware Series
- Product Group:
- Door Hinges and Pivots
- Product Subgroup:
- Pivots and Pivot Sets
- Product Type:
- Pivot Sets - Offset
- Commercial/Residential:
- Commercial
- Product Model:
- PV1000
- Door Hand Direction:
- Field Reversible
- Product Category:
- Door Hinges and Pivots
- Department:
- Door Hardware
Calibre Door Closers PV1000-AL – Frequently Asked Questions
1) Is the Calibre PV1000 pivot set handed, or can I use it on both left and right hand doors?
The PV1000 offset pivot set is field reversible, so one set covers either hand. You don't have to specify handing when you order, and a stocked set can go on whichever opening comes up next.
2) Can I adjust the door height after the PV1000 pivots are installed?
Some. The floor/jamb portion of the PV1000 gives 1/8 inch of vertical height adjustment, which is what you use to bring the bottom rail level and set the undercut over finish flooring. The larger 3/16 inch bearing adjustment in the bottom door portion belongs to the heavier PV-5000 and PV-7000 sets, not the PV1000.
3) I need a fire rated offset pivot set - what should I order?
Go to the ABH line for a stated fire rating. The ABH 0117 is a 3/4 inch offset pivot set for doors up to 300 lbs with fire rating, and the ABH 0117.25 is a heavy duty 3/4 inch offset set for doors up to 250 lbs, also fire rated. Both share the 3/4 inch offset hanging used by the Calibre PV1000, so the door and frame layout is the same family of prep.
4) What are the Calibre PV1000 pivots actually made of, and will they hold up in a high traffic entrance?
Pivot bodies are A380 aluminum alloy, precision die cast. The top frame portion runs an Oilite bronze bushing, the top door portion has a case hardened spring loaded pin, and the bottom door portion rides on a full race ball bearing with a case hardened stud in the floor/jamb piece. It's catalogued for commercial use, and the bearing and hardened wear points are the parts that decide service life on a door that cycles all day.
5) What finishes does the Calibre PV1000 pivot set come in, and will it match my storefront?
Two finishes: AL aluminum and DU storefront bronze. Those are the two standard aluminum entrance colors, so the set will match clear anodized or dark bronze storefront framing without a special order.
6) Does the Calibre PV1000 come with steel reinforcement plates like a heavy duty set?
The PV1000 does not include the steel reinforcement plates and 3/16 inch bottom bearing height adjustment that Calibre supplies with the PV-5000 and PV-7000; the PV1000 provides 1/8 inch vertical height adjustment at the floor/jamb portion, a full race ball bearing in the bottom door portion and a case hardened spring loaded top pin. If the opening calls for a heavier duty offset set, the ABH 0117.25 is a heavy duty 3/4 inch offset pivot set for doors up to 250 lbs with a fire rating.
7) What offset pivot set handles a heavier leaf than the Calibre PV1000 in a fire rated opening?
For a heavier offset hung leaf with a fire rating, the ABH 0117.25 is a heavy duty 3/4 inch offset pivot set for doors up to 250 lbs, and the ABH 0117 is a standard duty 3/4 inch offset set for doors up to 300 lbs; both carry a fire rating. The Calibre PV1000 uses the same 3/4 inch offset and is a commercial set with a case hardened spring loaded pin in the top door portion and a case hardened pivot stud in the floor/jamb portion, with 1/8 inch vertical height adjustment at the floor/jamb portion.
How fast can I get the Calibre Door Closers PV1000-AL delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Calibre Door Closers PV1000-AL come with a warranty?
Absolutely. The Calibre Door Closers PV1000-AL is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Calibre Door Closers PV1000-AL?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Calibre Door Closers PV1000-AL from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.